Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Danvers, MA
Chimney cleaning in Danvers typically costs between $189 and $319 for a standard sweep with a Level 1 inspection, and most jobs are completed the same day. The older the home, the more likely you’ll need creosote removal or a Level 2 camera inspection before burning season starts. Call (980) 580-8641 for a written price before any work begins.
Why Danvers Homes Are Different
Danvers isn’t a typical North Shore suburb. It’s the original Salem Village, and a good number of homes near Centre Street, Holten Street, and the old Salem Village district date from the 17th and 18th centuries. Those houses carry multi-flue rubblestone chimneys built for open-hearth cooking, not for the gas inserts or wood stoves homeowners install now. The flues are oversized, often unlined, and produce downdraft problems you simply don’t see in newer subdivisions. Add the salt air drifting in from Salem Harbor, five to eight miles away, and you get accelerated mortar erosion on exposed crowns. Then winter arrives. Danvers averages over 80 freeze-thaw cycles per season, which spalls old soft brick faster than almost any other local condition. Post-WWII Capes and ranches have their own issue: chimneys originally venting oil systems later converted to gas, leaving orphaned clay-tile flues sized wrong for the appliances now using them. That combination of historic construction and modern retrofitting means chimney work in Danvers requires more than a brush and a flashlight. It requires documentation, because what’s actually inside these flues is rarely what the homeowner assumes.
Our Main Danvers Services
Danvers homeowners call us most often for two things beyond the annual sweep: fireplace issues in older homes, and cap or crown failures caused by coastal weather and freeze-thaw pressure. Here’s what each involves locally.
Fireplace Services in Danvers
Older Danvers fireplaces hide problems behind closed dampers and decades of disuse. In the old Salem Village district especially, we routinely open fireplaces that haven’t been lit in 30 or 40 years to find no damper, no liner, and a flue cavity wide enough to lose a basketball in. A Level 2 camera inspection shows the homeowner exactly what’s there, and how much needs doing before the first fire. See Fireplace Services in Danvers for the full scope and local pricing.
Chimney Cap & Crown in Danvers
Salt air from Salem Harbor and 80-plus freeze-thaw cycles a year split crowns and rust caps faster in Danvers than in towns further inland. When we find a cracked crown or a corroded cap, the fix is straightforward: replace the cap, seal the crown, or both. We always photograph the damage first so you can see it. For details on setup and pricing, see Chimney Cap & Crown in Danvers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cleaning & Sweep in Danvers
Chimney cleaning and sweep in Danvers runs $189 to $319 for a standard job, and the single biggest driver of price is what the camera finds once we’re looking down the flue. Historic homes near the old Salem Village core accumulate Class III creosote, hardened tar-like deposits from long heating seasons and oversized colonial flues that never get hot enough to burn off the residue. Chimney Cleaning & Sweep is what we call the full documented process: a sweep, a Level 1 or Level 2 inspection per NFPA 211, and a photo record you keep.
Level 1 Inspection
Signs you need it
You use your fireplace every winter and haven’t had anyone look at the flue in over a year.
What it costs in Danvers
Included with a standard sweep, or $99 as a standalone inspection.
How we do it
We visually inspect the accessible portions of your chimney, the flue interior above the firebox, and confirm there are no obvious blockages or combustible deposits.
Level 2 Inspection
Signs you need it
You’ve bought the house, the chimney hasn’t been used in years, the roof was recently replaced, or you had a chimney fire.
What it costs in Danvers
$249 as a standalone service, or a $199 add-on with any sweep.
How we do it
We run a camera down the entire flue, inspect the smoke chamber and firebox, and photograph every accessible surface so you see exactly what we see.
Creosote Removal
Signs you need it
You smell a sharp, smoked-tar odor near the fireplace even when it’s cold, or you haven’t swept in multiple heating seasons.
What it costs in Danvers
$299 to $449 as a standalone service depending on the creosote class and flue length.
How we do it
We remove glazed creosote with rotary loop tools and additional brushing passes, then document the flue condition before and after with photographs.
Soot Removal
Signs you need it
Your fireplace glass turns black after one fire, or smoke spills into the room on light-up.
What it costs in Danvers
$149 to $229 depending on firebox size and flue length.
How we do it
We brush the flue and firebox, remove the fallen soot, and verify the smoke path is clear with a camera before we finish.
Annual Sweep
Signs you need it
You burn more than one cord of wood a season or use the fireplace weekly through the Danvers winter.
What it costs in Danvers
$189 to $319, including a Level 1 inspection and photo record.
How we do it
We lay drop cloths, brush the full flue length, remove deposits from the smoke shelf and damper, and sweep the firebox clean before a final visual check.
What Chimney Cleaning & Sweep Costs in Danvers
| Item | Typical range in Danvers |
|---|---|
| Level 1 Inspection | $99 |
| Level 2 Camera Inspection | $199 – $249 |
| Chimney Sweep (with Level 1) | $189 – $319 |
How often should a chimney be swept in Danvers?
Once a year if you burn wood weekly. Long North Shore heating seasons and oversized colonial flues accelerate creosote buildup, so annual service is the safe default. Call (980) 580-8641 to schedule.
Do I really need a camera inspection every time?
For most Danvers homes, yes. The older flues hide cracked tiles and gaps a visual glance can’t catch. The photo record shows you the actual condition. Call for a quote.
Chimney Repair in Danvers
Chimney repair in Danvers is driven by two forces: salt air eating mortar joints and hard freeze-thaw cycles spalling soft 18th-century brick. The longer a chimney goes without attention, the more the repair scope expands, which is why we document everything with a camera before discussing options. Chimney Repair is never guesswork here: we show you the exact joint or brick that failed.
Mortar Repointing
Signs you need it
Visible gaps, crumbling mortar joints, or loose bricks along the chimney face above the roofline.
What it costs in Danvers
$75 to $125 per square foot, or $750 to $1,250 for a standard partial repoint on a single-flue chimney.
How we do it
We rake out the failing mortar to a consistent depth, then pack in a color-matched mortar blend that flexes with freeze-thaw movement.
Spalling Brick Repair
Signs you need it
Brick faces are flaking off or falling onto the roof and lawn, and you can see exposed brick interiors.
What it costs in Danvers
$450 to $950 for individual brick replacement and matching, depending on the number and position.
How we do it
We remove the damaged brick, inspect what’s behind it, and replace it with either a matched salvage brick or a close modern match.
Chimney Waterproofing
Signs you need it
The brick soaks up water after rain and stays dark for hours, or efflorescence, the white salt staining, coats the chimney face.
What it costs in Danvers
$299 to $549 for a full chimney application after repairs, including cleaning and vapor-permeable sealant.
How we do it
We let the chimney dry, apply the sealant, and photograph the treated surface so you can see coverage before and after.
Flashing Repair
Signs you need it
Water streaks on the ceiling near the chimney, or visible gaps between the flashing and the brick or the roof plane.
What it costs in Danvers
$450 to $950 including removal of old flashing, re-seating, and re-sealing to the new roof line.
How we do it
We remove the old flashing, inspect the roof membrane below it, and install new flashing that channels water away from the chimney face.
Chimney Rebuilding
Signs you need it
The chimney leans, spalling covers more than half the exposed face, or the crown and top section are cracked beyond a simple repair.
What it costs in Danvers
$2,500 to $6,500 for a partial rebuild from the roofline up, depending on height and brick match.
How we do it
We dismantle the damaged section, rebuild it with new mortar and matched brick, and install a new crown before the final camera check.
What Chimney Repair Costs in Danvers
| Item | Typical range in Danvers |
|---|---|
| Mortar Repointing | $750 – $1,250 |
| Spalling Brick Repair | $450 – $950 |
| Flashing Repair | $450 – $950 |
Can you fix my chimney the same day in Danvers?
Most minor repairs like flashing or localized repointing go same day. Rebuilds and waterproofing need dry weather and often return visits. Call (980) 580-8641 for a straight answer.
Will my repair look patched?
We mortar-match and brick-match where possible. On very old Danvers brick, we’ll tell you honestly how close the match will be before we start. Call for a quote.
Chimney Liner & Rebuild in Danvers
Chimney liner and rebuild work in Danvers almost always starts with an old unlined flue or a clay-tile liner cracked beyond repair. In colonial homes, the flue cavities are oversized and never built for modern gas or wood appliances, so a stainless-steel liner is the standard fix. Chimney Liner & Rebuild is the service we recommend only after a camera inspection proves it’s necessary.
Stainless Steel Liner
Signs you need it
Your flue is unlined, or the clay tiles are cracked, or you’re installing a high-efficiency gas furnace or new wood stove.
What it costs in Danvers
$2,500 to $4,500 including the liner, insulation, top plate, and cap, sized to your appliance.
How we do it
We measure the flue, choose a DuraFlex liner sized to the appliance, and install it with a top plate, cap, and any required insulation.
Flexible Liner
Signs you need it
Your flue has offsets or bends, so a rigid liner would be difficult to install without removing the masonry.
What it costs in Danvers
$2,500 to $4,200, comparable to rigid liners, with the same insulation and top-plate components.
How we do it
We thread the flex liner through the flue and secure it to the appliance collar, then seal and photograph the full installation.
Liner Replacement
Signs you need it
The existing liner is cracked, spalling, or has gaps at the joints, or you’ve been told after a Level 2 inspection that the clay liner is failing.
What it costs in Danvers
$2,800 to $5,000 with a standard stainless-steel replacement and all required fittings.
How we do it
We remove the failing liner, verify the flue path, and install a new stainless liner sized to the current appliance.
Partial Rebuild
Signs you need it
The top section of the chimney has failed but the lower structure is sound, usually after years of crown leaks and water intrusion.
What it costs in Danvers
$3,500 to $6,500 for the rebuild from the roofline up, capped with a new crown and cap.
How we do it
We dismantle the damaged section, rebuild with new brick and mortar, and finish with a poured crown and cap.
Full Chimney Rebuild
Signs you need it
The chimney leans, bricks are missing along the full height, or the whole structure is spalling from decades of North Shore weather.
What it costs in Danvers
$6,500 to $15,000 depending on chimney height, brick matching, and access from the roofline or staging.
How we do it
We dismantle the original chimney, reuse salvageable brick where possible, and rebuild the full height to current code with new liners, a damper, and a cap.
What Chimney Liner & Rebuild Costs in Danvers
| Item | Typical range in Danvers |
|---|---|
| Stainless Steel Liner | $2,500 – $4,500 |
| Flexible Liner | $2,500 – $4,200 |
| Partial Rebuild | $3,500 – $6,500 |
Do I really need a new liner, or can I just keep using my chimney?
If the camera shows cracked tiles or an unlined flue, yes, you need a liner. It prevents chimney fires and carbon monoxide leaks. We’ll show you the photos before quoting anything.
How long does a stainless-steel liner last in Danvers?
DuraFlex liners typically last 15 to 25 years in our climate. Salt air matters less on the inside, but we always include the top plate and cap. Call for an exact quote.
Brands We Service in Danvers
We install and service liners and caps from DuraFlex, Copperfield, and HeatShield. We keep common stainless liner components and top plates stocked locally, so typical Danvers liner jobs don’t wait on freight. For more detail on what we use and why, see our brands.
Pricing for Chimney Cleaning in Danvers, MA
| Service | Typical range in Danvers |
|---|---|
| Chimney Sweep (with Level 1 Inspection) | $189 – $319 |
| Level 2 Camera Inspection | $199 – $249 |
| Creosote Removal | $299 – $449 |
| Soot Removal | $149 – $229 |
| Mortar Repointing | $750 – $1,250 |
| Spalling Brick Repair | $450 – $950 |
| Flashing Repair | $450 – $950 |
| Chimney Waterproofing | $299 – $549 |
| Stainless Steel Liner | $2,500 – $4,500 |
| Partial Rebuild | $3,500 – $6,500 |
Prices in Danvers push upward when a chimney is very tall, when brick has to be custom-matched on a colonial rebuild, or when a flue is so oversized it requires a full reline instead of a simple sweep. Every quote is written, scoped, and priced before any work starts.
Neighborhoods We Serve in Danvers
We cover the entire town from the Salem Village historic core to the newer neighborhoods off Route 62 and Route 35. Response time is typically 1 to 2 business days for most Danvers addresses.
- Danvers Centre / Salem Village
- Danversport
- Tapleyville
- Putnamville
- Ferncroft area
Service Area - Cities Near Danvers
Beyond Danvers, we also serve Peabody, MA, Beverly, MA, Salem, NH, and Marblehead, MA. If you’re just over the town line or in a neighboring community, we can usually schedule the same week.
Serving Danvers, MA - Our Local Coverage Area
We’re based in the Danvers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Danvers
For a routine sweep or Level 1 inspection, no. For a rebuild or liner installation, Danvers building codes may require a permit, and we handle the paperwork for the work we’re doing. We’ll tell you before we start.
Most Danvers sweeps take 45 minutes to 2 hours, depending on the flue size and the creosote class. A Level 2 camera inspection adds 30 to 45 minutes. We can usually tell you the window when you book.
Creosote builds up, the flue narrows, and you risk a chimney fire or carbon monoxide back-drafting into the house. With Danvers’ long cold winters, skipped years compound quickly. Call (980) 580-8641 for a written price.
Call Emberly Chimney Cleaners at (980) 580-8641 for a free estimate on chimney cleaning, repair, or liner work in Danvers. A written price, written scope, and written warranty are delivered before any work starts, and the 365-Day Done Right Promise is stamped on every job under the Haven Standard.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Danvers Customers Say
"Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F.