Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Fireplace Services Across Danvers
Fireplace service in Danvers, MA typically runs $185-$690 depending on what we find, and most visits are booked within 5-10 business days. If you heat with a fireplace or insert in an older Danvers home near Centre Street, Holten Street, or the old Salem Village district, the chimney carrying your exhaust was very likely built for open-hearth fires, not modern appliances. That single fact drives most of what we repair here. Call (980) 580-8641 and we’ll scope the flue before we recommend anything.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Danvers under the Haven Standard.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Emberly Chimney Cleaners Is Danvers’s Preferred Fireplace Services Company
Our Fireplace Services team works on Danvers chimneys every week, and the houses here tell a story most inspectors miss. We know that a Federal-era flue near Holten Street behaves nothing like a 1970s ranch flue off Route 62. We know the freeze-thaw cycle near the North Shore chews through soft handmade brick crowns faster than newer masonry. And we know Danvers homeowners don’t want a sales pitch attached to a sweep. They want the camera footage before they write a check.
Every tech who arrives in Danvers is background-checked, uniformed, and carries a license number you can verify on the page. We text before we arrive, and a live person answers the phone 24/7. The job isn’t done until you have a written scope, written price, and a documented photo record of what we found and what we did. That’s Clause 4 of the Haven Standard, and it’s been our default since 2009.
When Danvers customers leave reviews, they mention the same two things: the price didn’t change after the inspection, and the photos showed exactly what the tech described. Corrine Halstead has built the company around that discipline. We’d rather lose a job than recommend a liner a customer can’t see on our own camera.
Our Fireplace Services in Danvers
Gas Fireplace Service
Gas fireplaces in Danvers get called “maintenance-free” by builder salespeople, but the venting they rely on is often the oldest part of the house. A gas insert dumped into an original 1700s flue without a properly sized stainless liner will condense acidic combustion byproduct into the firebox, and it does it quietly over a few winters. We service gas logs, direct-vent inserts, and B-vent systems, and we scope the flue on every visit, not just when something smells off. A typical gas fireplace service in Danvers runs $185-$320.
Wood Burning Fireplace
Wood-burning fireplaces in Danvers range from well-maintained Colonial center-chimney stacks to Cape Cods with a single flue that hasn’t seen a sweep since the last presidential election before Nixon. The challenge in Danvers’s oldest homes isn’t the firebox, it’s the flue geometry. A 12×12 rubblestone flue never drafted well with a modern fire, and it drafts worse after decades of mortar spalling. We sweep, camera-scan, and give you a written condition report before we recommend any repair. A standard wood fireplace sweep and Level 2 inspection in Danvers runs $210-$340.
Fireplace Insert
Fireplace inserts are the fastest way to turn a decorative colonial fireplace into a real heat source, but only if the liner actually fits. Danvers chimneys built before 1900 often carry flues sized for a kitchen hearth fire, and a modern wood or gas insert vented through that oversized cavity will struggle with draft reversal and creosote condensation. We install inserts sized to the appliance and the flue, typically with a DuraFlex stainless liner, and we show you the fit on camera before the job closes. Insert installation in Danvers, including liner and labor, typically runs $3,400-$6,800 depending on length and firebox condition.
Damper Repair
Danvers dampers fail in predictable ways: rust-through in chimneys with salt-air exposure from Salem Harbor, or warped frames in fireplaces that were over-fired during long North Shore winters. A damper that won’t seal sends heated indoor air up the chimney all winter, which shows up as a $200-$400 heating bill surprise by February. We repair and replace throat dampers and top-sealing dampers, and we check the smoke chamber at the same time because that’s usually where the real blockage hides. Damper repair in Danvers runs $230-$480.
BeforeAfterTrusted Brands We Service in Danvers
We stock and install components from Copperfield, Famco, Olympia Chimney, and Gelco through the Haven buying network, which keeps prices for Danvers customers lower than distributor markups. Whether you need a replacement damper assembly, a cast refractory fireback repair, or a full liner system sized to a specific insert, we can usually get parts into Danvers within a week. We service most major fireplace and insert brands, including Regency, Napoleon, Heatilator, Quadra-Fire, and Valor. If we don’t know the model, we’ll find it while we’re on site with the manufacturer tag, not after we’ve left.
Common Fireplace Problems We See in Danvers Homes
- Massively oversized colonial flues. Original 17th and 18th-century chimneys near Centre Street and the Salem Village district have flue cavities up to 12×12 inches. Modern inserts fire through them like an engine through a four-inch exhaust, and the result is chronic downdraft, smoke roll-out, and acidic condensation.
- Third-degree creosote glaze from oil-to-gas conversions. Danvers has thousands of post-WWII homes whose oil furnaces were switched to gas. The clay-tile flue, now oversized for a short-cycling gas appliance, never gets hot enough to burn off first-degree creosote, so it bakes into a hard glaze that a standard brush won’t remove.
- Missing or rusted dampers in long-unused fireplaces. We regularly open Danvers fireplaces that haven’t been lit since the 1980s and find no damper at all, or a cast-iron throat damper rusted shut from decades of salt-laced condensation. The homeowner assumes the fireplace works because the house is old enough to have one.
- Spalled brick crowns and eroded mortar joints. Danvers sits five to eight miles inland from Salem Harbor, close enough for salt-air to accelerate crown deterioration, and the region logs over 80 freeze-thaw events per winter. Soft handmade colonial brick doesn’t survive that beating without regular repointing and crown sealing.
Pricing for Fireplace Services in Danvers, MA
A standard chimney sweep with a Level 2 camera inspection in Danvers runs $210-$340. Gas fireplace service runs $185-$320. Damper repair ranges $230-$480. A fireplace insert installation, including the correct stainless liner, smoke chamber work if needed, and labor, typically lands between $3,400 and $6,800 in this market. Fireplace conversions, where we refit an old wood-burning firebox for gas or a direct-vent unit, range $1,900-$4,200 depending on what the camera finds. What changes the price in Danvers is usually flue height on multi-story colonials, the condition of the smoke chamber, and whether the existing liner can be reused. We give you a written price before work starts, and we honor it. Call (980) 580-8641 for a free estimate, and bring a competitor’s quote if you have one. We’ll give you a free second opinion on it.
We Also Serve Cities Near Danvers
Our crews cover Fireplace Services in Danvers and the surrounding North Shore communities, including Peabody, Beverly, Salem, and Marblehead. If you live within a fifteen-minute drive of Danvers Centre, we can typically schedule you during the same week. Dispatch and scheduling are coordinated from our Boston office; the technicians who show up work in Danvers regularly and know the local housing stock.
Serving Danvers, MA - Our Local Coverage Area
We’re based in the Danvers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Danvers
Because your chimney was probably built for an open-hearth fire in the 1700s, not for the modern firebox or insert you’re using now. Original Danvers flues near Centre Street and Holten Street can be 12×12 inches or larger, which is far too wide to maintain proper draft for a modern wood stove or gas insert. The result is draft reversal and smoke spilling into the room every time the wind shifts. Our camera inspection will show you the flue geometry in about ten minutes. Call (980) 580-8641 to schedule one.
Not until a camera has been through the flue. In Danvers homes where a fireplace has sat unused for 30 to 50 years, we frequently find no damper, no liner, and a smoke chamber that’s partially collapsed into the firebox. The original construction was never meant for the way we burn today, and the only way to know whether it’s safe is to scope every foot of the flue and show you the footage. We won’t tell you it’s safe from how it looks from the hearth.
Only with a properly sized stainless-steel liner. An original Danvers colonial flue was built to carry the smoke of a large cooking fire, not the cool, moisture-heavy exhaust of a modern gas insert. Venting a gas appliance into that oversized cavity without a liner produces condensation that eats at the firebox mortar and sends acidic runoff into the smoke chamber. We size and install liners from DuraFlex and will show you the fitting on camera before we close out the job. A typical liner installation in Danvers runs $1,200-$3,800 depending on flue length.
Salt-laden air accelerates mortar joint erosion and crown cracking, especially in the older soft-brick chimneys common in Danvers’s pre-1900 housing. Combined with the region’s 80-plus freeze-thaw cycles each winter, that means crowns fail faster here than in inland towns like Middleton or Topsfield. A cracked crown lets water into the flue and firebox, and by spring you’re looking at spalled brick and a damp smoke chamber. We seal and repair crowns as part of standard fireplace and chimney service.
Because the old one was sized for an oil furnace that ran long, hot cycles. A gas appliance runs shorter and cooler, which means the oversized clay-tile flue never gets hot enough to burn off first-degree creosote. Over a few winters in Danvers, that creosote bakes into a third-degree glaze, and that’s the kind of deposit that fuels chimney fires. A correctly sized liner from Copperfield or Famco solves the temperature problem and brings the flue back to code. Call (980) 580-8641 and we’ll scope the flue and show you exactly what’s in there before we recommend anything.
Get a Written Price Before Any Work Starts
If your Danvers fireplace hasn’t been inspected in the last five years, or if you’re planning to install an insert or convert an old wood-burning firebox, the first step is a camera-scoped Level 2 inspection. You’ll get a written price, a written scope, and a documented photo record of everything we find before we touch anything. The 365-Day Done Right Promise backs every job: if it’s not done right, we make it right. Call (980) 580-8641 to book your inspection, or bring us a competitor’s written estimate for a free second opinion.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Danvers under the Haven Standard.
Fireplace Services in Nearby Areas