Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Danvers
Chimney cap and crown work in Danvers, MA typically runs $225-$680 for a standard cap with installation, and $450-$1,200 for a poured crown repair, depending on flue count and masonry condition. We’re Emberly Chimney Cleaners, and we’ve seen the full range of what Danvers chimneys throw at homeowners, from 1740s colonials near Centre Street to post-war Capes off Route 62. Our crews work throughout Danvers every week, and because our techs know the specific failure patterns of North Shore masonry, we can tell you within minutes whether your crown just needs coating or a full rebuild. Call (980) 580-8641 and we’ll give you a written price before anyone picks up a trowel.
Why Emberly Chimney Cleaners Is Danvers’s Preferred Chimney Cap & Crown Company
Danvers homeowners tend to ask the same question: how do I know I actually need this repair? We answer with a camera. Every job here starts with an NFPA 211 Level 2 inspection, which means a camera goes down the flue and you see what we see. If we recommend a new cap or a crown rebuild on your Danvers chimney, you’ll have photos and footage of the exact condition before you approve a dollar of work. Nothing gets recommended on a hunch, and nothing gets upsold because your house is old enough to make it easy.
Our Chimney Cap & Crown team has worked on hundreds of Danvers chimneys, including multi-flue colonials in the old Salem Village district where mortar has turned to dust and flues were never meant to see a gas appliance. Written scope, written warranty, and a photo record on completion are standard, because Clause 1 and Clause 4 of the Haven Standard require them. We don’t ask you to trust us. We hand you the evidence, then let you decide.
Corrine Halstead runs our operation, and she’s built the team around one rule: a homeowner should never approve a chimney repair they can’t verify with their own eyes. That’s why our techs are background-checked, uniformed, and arrive with a named appointment and a text when they’re on the way. If you call (980) 580-8641, a live person answers. Not a voicemail, not a web form.
Our Chimney Cap & Crown Services in Danvers
Cap Installation
A new chimney cap in Danvers does two jobs: it keeps rain, leaves, and squirrels out of the flue, and it can dramatically change draft behavior. On older Danvers chimneys with oversized, unlined flues, the wrong cap actually makes downdraft worse. We measure the flue, check what’s venting through it, and install a cap sized to the actual appliance, not just the masonry opening. For most Danvers homes, a standard stainless steel cap with installation runs $225-$480.
Cap Replacement
If your existing cap is rusted through, blown off by a winter storm, or was sized wrong from the start, replacement is straightforward. What’s not always straightforward in Danvers is the flue underneath. We’ve replaced caps on Holten Street chimneys where the original clay tile had spalled into pieces and the cap was the only thing holding the top of the stack together. When we replace a cap here, we camera-scan the upper flue as part of the job so you know what you’re actually covering.
Crown Repair
A chimney crown is the concrete slab that seals the top of the masonry around the flue. In Danvers, crowns fail fast. Salt-laden air from Salem Harbor works into the concrete, and the region’s 80+ freeze-thaw cycles per winter split it open. Once a crown cracks, water tracks straight down into the flue and firebox. We rebuild crowns using a proper overhang so water drips away from the brick, not down it. Typical crown repair in Danvers runs $450-$900 depending on chimney footprint, and the difference between repair and replace comes down to what our camera finds underneath.
Crown Coating
For crowns with surface deterioration but intact structure, we apply a Gelco CrownSeal coating that waterproofs the masonry and buys years before a full rebuild is necessary. It’s the right move for many post-war Capes in Danvers where the crown is starting to erode but hasn’t yet cracked through. Coating typically runs $250-$450 in Danvers, and we document the before and after with photos so you can see exactly what was applied.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Danvers
We install Famco and Copperfield caps on Danvers chimneys because they hold up to coastal air without rusting out in three seasons. For crown sealing, we use Gelco products, which we’ve found perform better in freeze-thaw conditions than cheaper acrylic sealers that flake off after one winter. We stock common cap sizes locally for Danvers jobs, so most replacements don’t require a wait for shipping. If your chimney needs a specific multi-flue configuration, we’ll show you the options from both Famco and Copperfield, with the written price before you choose.
Common Chimney Cap & Crown Problems We See in Danvers Homes
- Crowns crumbling from salt and freeze-thaw. Danvers sits only a few miles inland from Salem Harbor, and that salt-laden air works into crown concrete year-round. Add 80+ freeze-thaw cycles per winter and unprotected crowns on older Danvers chimneys come apart within a decade.
- Downdraft in oversized colonial flues. The 17th and 18th-century chimneys around Centre Street and Holten Street were built for open-hearth fires, not modern stoves or gas inserts. When a homeowner adds a new cap without accounting for the oversized flue, smoke often spills back into the room instead of drafting up.
- Orphaned clay-tile flues from oil-to-gas conversions. Many post-war Danvers Capes were built for oil heat, then converted to gas. The original clay-tile flue is now far too large for the appliance using it, which means cooler exhaust and faster creosote accumulation if anyone burns wood.
- Rusted or missing caps on second flues. On multi-flue chimneys, homeowners often cap the active flue and forget the second one. That open flue lets rain, birds, and snow straight into the masonry from the inside. We see this constantly in Danvers, and it’s a $300 fix that prevents a $3,000 rebuild later.
Pricing for Chimney Cap & Crown in Danvers, MA
Danvers pricing for cap and crown work generally falls in these ranges:
- Standard single-flue cap, supplied and installed: $225-$380
- Multi-flue cap for colonial chimneys: $450-$680
- Custom cap for oversized or oddly-spaced flues: $550-$900
- Crown coating with Gelco sealant: $250-$450
- Full poured crown rebuild: $450-$1,200 depending on footprint and access
What moves the price is flue count, chimney height, and whether the masonry underneath the crown needs any rebuilding. We give you a written price before work starts, every time, with a written scope and warranty included. Call (980) 580-8641 for a free estimate on your Danvers chimney, and bring us any competitor’s written quote for a second opinion. A second look costs you nothing.
We Also Serve Cities Near Danvers
Our Chimney Cap & Crown in Danvers team also covers Peabody, Beverly, Salem, and Marblehead. If you live in any of these North Shore towns and you’re dealing with a failing crown or a cap that’s not doing its job, the same written-price-before-work rule applies everywhere we go. Call (980) 580-8641 and we’ll schedule you with a named, background-checked tech.
Serving Danvers, MA - Our Local Coverage Area
We’re based in the Danvers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Danvers
Salt air from Salem Harbor accelerates mortar and concrete erosion on exposed chimney crowns by carrying chlorides into the masonry, where they crystallize and break apart the surface during freeze-thaw cycles. In Danvers, which sits 5-8 miles inland from the water, crowns that would last 20 years inland often need attention within 8-12 years. A Gelco coating adds a waterproof barrier that slows this process significantly. Call (980) 580-8641 for a crown inspection, and we’ll show you photo evidence of the current condition.
Because the flue was designed for an open fire measuring several feet wide, not for the much smaller draft column of a modern fireplace or insert. A new cap doesn’t change the fact that the flue is oversized and unlined, which means combustion gases cool too quickly and don’t develop enough draft to rise. The fix is usually a properly sized stainless liner paired with a cap that matches the liner diameter, not the original flue opening. We’ve seen this exact scenario on Holten Street, and the solution is camera-verifiable before and after. Call (980) 580-8641 for a Level 2 inspection.
NFPA 211, the standard we inspect to, requires a Level 2 inspection any time you change the appliance venting through a chimney or before a property transfers ownership, and it includes visual examination of the crown, cap, and upper masonry. A Level 2 means a camera goes down the flue to document the interior, which is how we determine whether crown cracks are surface-level or travelling deeper into the flue. On older Danvers homes, that distinction determines whether you coat, rebuild, or reline. We include the camera scan and photo record on every visit.
Yes, provided the crown is structurally sound enough to anchor the cap hardware without further cracking. On many Danvers colonials, the crown has enough surface deterioration that we recommend coating first, then mounting the cap over both flues with proper spacing. We use Famco multi-flue caps sized to each flue, and if the crown won’t hold hardware, we’ll tell you that before any work starts, with camera footage showing why. Call (980) 580-8641 and we’ll give you a written price either way.
Yes, and for two separate reasons. The cap keeps rain, debris, and animals out of the flue that is now venting gas, which is required to prevent moisture damage inside the masonry. The crown still needs to be intact because it’s the seal that protects the brick itself, regardless of what’s burning in the firebox. What changes with an oversized flue is that a liner is often recommended to match the gas appliance’s diameter, and the cap size follows the liner, not the original chimney opening. Call (980) 580-8641 for a camera inspection and written scope before you decide anything.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Danvers and the North Shore.