Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Aurora, CO
A chimney sweep in Aurora costs between $189 and $329 for a standard cleaning with a Level 1 inspection, while a Level 2 camera inspection runs $249 to $449. Aurora homes need this service more often than national guidelines suggest because the city sits at 5,400 feet, where thin air makes wood burn cooler and creosote build faster. Call (980) 580-8641 for a written quote before any work begins.
Why Aurora Homes Are Different
Aurora sits at roughly 5,400 feet elevation, and that single fact changes how chimneys behave here. Reduced atmospheric oxygen causes wood to burn cooler and less completely than at sea level, producing measurably more creosote per fire than national cleaning-frequency guidelines assume. A fireplace that might go two years between sweeps in Kansas City needs attention far sooner in Aurora, especially in older neighborhoods like Hoffman Heights, Del Mar Parkway, and Aurora Highlands.
Combine the elevation issue with the Front Range’s Chinook wind events, and you get a second problem most chimney companies never mention. A rapid warm downslope wind can create negative pressure that momentarily reverses the flue draft, shaking creosote flakes loose inside the chimney and pushing corrosive gases back toward the home. Our technicians working Aurora’s older neighborhoods know to check fireboxes for loose creosote flakes and soot on the hearth floor, a telltale sign of Chinook-driven backdrafting that is common on the Front Range but virtually absent in cities east of the plains.
The housing stock adds a third layer. Aurora’s explosive postwar and 1960s through 1980s tract-home boom left a large inventory of ranch and split-level homes with original masonry chimneys now 40 to 70 years old. Many still use their first-generation clay flue tile liners, which are well past typical service life. Those tiles frequently show cracking or separation, and the semi-arid climate’s 40 to 60 degree temperature swings during Chinook events subject crowns, mortar joints, and liners to freeze-thaw stress that accelerates spalling far faster than in more stable climates.
Our Main Aurora Services
Two services generate the most calls from Aurora homeowners, and both have dedicated pages with full pricing and process details.
Fireplace Services in Aurora
Aurora’s older ranch and split-level homes often have original fireboxes that have seen decades of use, and the dry Front Range air is hard on refractory panels and mortar beds. We inspect fireboxes for cracks, deteriorated mortar, and backdrafting evidence, then show you photos of what we find before recommending any work. The Chinook-driven draft reversal issue means firebox integrity matters more here than in most cities. See Fireplace Services in Aurora for full details.
Chimney Cap & Crown in Aurora
Aurora’s freeze-thaw cycles punish chimney crowns harder than almost any climate in the country. A hairline crack in October becomes a spalled, crumbling crown by March, and once water gets into the masonry the damage compounds. We install and repair caps and crowns using materials from Olympia Chimney and Gelco, with a written warranty on every job. See Chimney Cap & Crown in Aurora for pricing and process.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Aurora
Chimney cleaning in Aurora is not a once-a-decade chore. At 5,400 feet, wood burns cooler and less completely, producing more creosote per fire than at sea level, and the city’s Chinook winds can reverse draft and shake debris loose inside the flue. Homes built during the postwar boom in neighborhoods like Hoffman Heights and Aurora Hills often still run original clay liners, and those liners trap creosote in cracked tiles where a brush cannot reach. The result is that Aurora chimneys need a sweep and inspection more often than the same fireplace would in Denver, let alone a lower-elevation city. We follow NFPA 211 Level 2 standards on every visit, and you get a documented photo record when we are done. Our Chimney Sweep service covers everything from a basic annual sweep to full creosote removal.
Level 1 Inspection
Signs you need it
You use your fireplace regularly and it has been more than 12 months since anyone looked inside the flue.
What it costs in Aurora
A Level 1 inspection runs $189 to $329 and is included with every standard chimney cleaning.
How we do it
We examine the accessible portions of the fireplace, flue, and exterior chimney, checking for creosote buildup, obstructions, and visible damage, then document findings with photos.
Level 2 Inspection
Signs you need it
You just bought the home, you have never had a camera scan of the flue, or you suspect a liner issue in an older Aurora house.
What it costs in Aurora
A Level 2 camera inspection costs $249 to $449 and includes a full written report with images.
How we do it
We run a camera down the full length of the flue to identify cracked clay tiles, separated mortar joints, or hidden creosote deposits, then walk you through every image.
Creosote Removal
Signs you need it
You see shiny, tar-like deposits on the damper or firebox walls, or you smell a sharp, smoky odor even when the fireplace is cold.
What it costs in Aurora
Creosote removal runs $350 to $650 depending on severity, with Class III glazed creosote at the upper end.
How we do it
We use rotary loops and chemical treatments to break down tar-like deposits, then vacuum and document the result with before-and-after photos.
Soot Removal
Signs you need it
Black dust collects around the hearth or you notice smoke spilling into the room when you light a fire.
What it costs in Aurora
Soot removal is included in a standard sweep at $189 to $329, with heavier soot from oil or gas appliances running $250 to $400.
How we do it
We brush the flue from top to bottom, remove the soot from the smoke chamber and firebox, and run a HEPA vacuum throughout the work area.
Annual Sweep
Signs you need it
You burn wood more than a dozen times per year, or more than a season has passed since the last sweep in an Aurora home.
What it costs in Aurora
An annual sweep with a Level 1 inspection runs $189 to $329.
How we do it
We remove creosote and soot from the flue, smoke chamber, and firebox, then inspect the full system and provide a written report with photos.
What Chimney Sweep Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| Standard sweep with Level 1 inspection | $189 - $329 |
| Level 2 camera inspection | $249 - $449 |
| Creosote removal (Class II-III) | $350 - $650 |
How often should I have my chimney cleaned in Aurora?
Every 12 to 18 months at minimum, and more often if you burn wood weekly or notice backdrafting after Chinook winds. Aurora elevation causes faster creosote accumulation than national guidelines assume.
Does the price include the inspection?
Yes. Every standard sweep includes a Level 1 inspection, and the written quote you receive before work starts covers the full scope. Nothing is added after the fact.
Chimney Repair in Aurora
Chimney repair in Aurora usually means addressing freeze-thaw damage, not just old age. The city’s 40 to 60 degree daily temperature swings during Chinook events push water into mortar joints and crown cracks, where it freezes, expands, and spalls brick and stone. Homes built in the 1960s through 1980s across Aurora, particularly the original tract-home neighborhoods, are now showing widespread crown failure and deteriorated mortar joints that were never designed for this climate. Our Chimney Repair service starts with a camera inspection and a written price before any work begins.
Mortar Repointing
Signs you need it
Mortar joints are crumbling, recessed, or missing entirely, and you can pick out loose material with a finger.
What it costs in Aurora
Repointing runs $45 to $75 per square foot, with most Aurora jobs landing in the $1,800 to $3,000 range.
How we do it
We grind out deteriorated mortar to a proper depth, pack in fresh mortar matched to the original color and texture, and seal the joints against moisture.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, popping off, or leaving red dust and chips on the ground around the chimney base.
What it costs in Aurora
Spalling brick repair runs $600 to $1,800 depending on the number of bricks and access.
How we do it
We remove damaged bricks, replace them with matched units, and re-point the surrounding joints to restore structural integrity.
Chimney Waterproofing
Signs you need it
You see efflorescence, a white powdery residue on the brick, or water stains on the ceiling near the chimney after rain or snowmelt.
What it costs in Aurora
Waterproofing runs $400 to $800 and includes a breathable siloxane treatment rated for freeze-thaw climates.
How we do it
We clean the masonry, repair any cracks, then apply a vapor-permeable waterproofing agent that keeps water out while letting the brick breathe.
Flashing Repair
Signs you need it
You see rusted, lifted, or missing flashing where the chimney meets the roof, or water stains appear on the ceiling after storms.
What it costs in Aurora
Flashing repair runs $500 to $1,200 depending on the roof pitch and how much flashing needs replacement.
How we do it
We remove the old flashing, install new step and counter flashing, and seal everything with a high-grade roofing sealant.
Chimney Rebuilding
Signs you need it
The chimney leans, large sections of brick are missing, or the structure has separated from the house at the roofline.
What it costs in Aurora
A partial rebuild above the roofline runs $3,000 to $6,000, while a full rebuild can reach $8,000 to $15,000.
How we do it
We dismantle the damaged section, rebuild it with new brick, a proper crown, and new flashing, then document the job with photos.
What Chimney Repair Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| Mortar repointing | $45 - $75 per sq ft |
| Spalling brick repair | $600 - $1,800 |
| Chimney waterproofing | $400 - $800 |
| Flashing repair | $500 - $1,200 |
| Partial rebuild (above roofline) | $3,000 - $6,000 |
Can a cracked chimney be repaired, or does it need rebuilding?
Most cracked chimneys in Aurora can be repaired with repointing and crown work if the damage is caught early. A leaning or severely spalled chimney may need a partial rebuild. Camera inspection tells us which one you need.
Does chimney repair in Aurora cost more because of the climate?
Yes, Aurora’s freeze-thaw cycles cause more extensive damage than in stable climates, so repairs often involve more square footage and deeper repointing. We give you a written price before any work starts.
Chimney Liner & Rebuild in Aurora
Chimney liner and rebuild work in Aurora is driven by the city’s older housing stock and its punishing freeze-thaw climate. Homes built during the postwar and 1960s through 1980s boom, particularly in neighborhoods like Hoffman Heights and Del Mar Parkway, often still run their original clay flue tile liners, and those tiles are now cracking, separating, or spalling under decades of thermal stress. When a liner fails, flue gases can leak into the home or ignite creosote in the surrounding masonry. Our Chimney Liner & Rebuild service covers stainless steel liners, partial rebuilds, and full chimney reconstruction with a written price before we start.
Stainless Steel Liner
Signs you need it
Your clay liner is cracked or separated, or you are converting to a high-efficiency gas appliance that requires a properly sized metal liner.
What it costs in Aurora
A stainless steel liner installed runs $3,000 to $6,000 depending on flue length and accessibility.
How we do it
We size the liner to your appliance, run it down the full flue, insulate as needed, and connect it to the appliance with a new top plate and cap.
Flexible Liner
Signs you need it
Your flue has bends or offsets that make a rigid liner impractical, or you need a liner installed quickly through an existing masonry chimney.
What it costs in Aurora
A flexible liner installation runs $3,500 to $6,500 depending on the flue configuration.
How we do it
We pull a flexible stainless liner through the existing flue, insulate it, and secure it with a new top plate and rain cap.
Liner Replacement
Signs you need it
Your existing liner is cracked, flaking, or has gaps where sections have separated, or a camera inspection shows damage you cannot see from the top.
What it costs in Aurora
Liner replacement runs $3,000 to $6,000 for a standard masonry chimney, with complex flues at the higher end.
How we do it
We remove the damaged liner, install a new stainless liner sized for the appliance, and provide a camera scan of the completed work.
Partial Rebuild
Signs you need it
The chimney above the roofline is spalling, leaning, or missing bricks, but the lower structure is still sound.
What it costs in Aurora
A partial rebuild above the roofline runs $3,000 to $6,000 including a new crown and flashing.
How we do it
We dismantle the damaged section, rebuild it with new brick and a proper concrete crown, and install new flashing at the roofline.
Full Chimney Rebuild
Signs you need it
The chimney is leaning, large sections are missing, or structural damage extends from the firebox to the crown.
What it costs in Aurora
A full rebuild runs $8,000 to $15,000 depending on height, access, and materials.
How we do it
We dismantle the entire chimney, pour a new footing if needed, rebuild with new brick, install a new liner, crown, and flashing, and document every stage.
What Chimney Liner & Rebuild Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| Stainless steel liner | $3,000 - $6,000 |
| Flexible liner | $3,500 - $6,500 |
| Liner replacement | $3,000 - $6,000 |
| Partial rebuild | $3,000 - $6,000 |
| Full chimney rebuild | $8,000 - $15,000 |
How do I know if my liner actually needs replacing?
A camera scan shows the condition of the liner in real time. If we see cracked tiles, separated sections, or creosote leaking through joints, we will show you those images and explain what they mean. You decide from evidence, not a sales pitch.
Do I really need a new liner, or can I just keep using the chimney?
If the liner is cracked or separated, continuing to burn creates a real fire and carbon monoxide risk in an Aurora home. We never recommend a liner replacement without camera evidence you can see yourself, and we will tell you plainly when work can safely wait.
Brands We Service in Aurora
We install and service liners and components from Gelco, Olympia Chimney, Famco, and Copperfield. Common parts are stocked for quick turnaround in Aurora, and anything uncommon is sourced within days. See our brands for full details on what we carry and why.
Pricing for Chimney Cleaning in Aurora, CO
| Service | Typical range in Aurora |
|---|---|
| Standard sweep with Level 1 inspection | $189 - $329 |
| Level 2 camera inspection | $249 - $449 |
| Creosote removal (Class II-III) | $350 - $650 |
| Mortar repointing | $45 - $75 per sq ft |
| Spalling brick repair | $600 - $1,800 |
| Chimney waterproofing | $400 - $800 |
| Flashing repair | $500 - $1,200 |
| Partial rebuild (above roofline) | $3,000 - $6,000 |
| Stainless steel liner | $3,000 - $6,000 |
| Full chimney rebuild | $8,000 - $15,000 |
Prices in Aurora run higher than nearby Denver when work involves extensive freeze-thaw damage or access challenges on older ranch and split-level homes. Every job gets a written price and a written scope before we start, so the number you approve is the number you pay.
Neighborhoods We Serve in Aurora
We serve every neighborhood in Aurora, from the original postwar communities to the newer subdivisions on the east side. Typical response time for a scheduled sweep or inspection is 3 to 7 business days, with faster scheduling available for urgent liner or structural issues.
- Hoffman Heights
- Del Mar Parkway
- Aurora Highlands
- Seven Hills
- Murphy Creek
Service Area - Cities Near Aurora
We serve Aurora and the surrounding Front Range communities, including Denver, CO, Commerce City, CO, Thornton, CO, and Englewood, NJ. Dispatch and scheduling are coordinated from our Denver office, and crews serve Aurora locally. Call (980) 580-8641 to confirm availability in your area.
Serving Aurora, CO - Our Local Coverage Area
We’re based in the Aurora area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Aurora
For a standard sweep or inspection, we can typically schedule within 3 to 7 business days. If you have an active issue like water intrusion or a suspected liner failure, call (980) 580-8641 and we will prioritize the visit based on what you describe.
Most cleaning and inspection work requires no permit. Structural rebuilds and some liner installations may require city approval depending on scope, and we will identify that during the written quote process before any work starts.
Yes. Many Aurora neighborhoods have HOAs with exterior modification rules, and we are familiar with the common requirements. We provide written scopes and documentation that satisfy most HOA review processes.
Call (980) 580-8641 for a free estimate on chimney cleaning, repair, or liner work in Aurora. You will get a written price before any work begins, and a documented photo record when we are done.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aurora Customers Say
"We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V.