Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Commerce City, CO
Chimney cleaning in Commerce City runs $169-$289 for a standard sweep with a Level 1 inspection, and the job usually takes 45-90 minutes. What makes this city different is what we find inside the flues of the older southern neighborhoods: decades of creosote layered over clay tile that has been quietly cracking since long before most current owners bought the house. If you live in one of the 1940s-1960s ranch homes near Dahlia Street or 72nd Avenue, call Emberly Chimney Cleaners at (980) 580-8641 and we’ll give you a written price before anyone rings your doorbell.
Why Commerce City Homes Are Different
Commerce City sits on open, flat plains with no topographic wind break. That matters for chimneys more than most homeowners realize. Strong northwest chinook winds push against exposed masonry crowns, and the Front Range’s freeze-thaw cycle does the rest: water seeps into hairline cracks, freezes, expands, and widens them. We see crown fractures and spalling brick on this side of town at rates well above what we find in more sheltered parts of metro Denver.
Then there’s the housing stock itself. The southern core of Commerce City was built in the 1940s through 1960s to house refinery workers, and those modest bungalows and ranches almost all have original masonry chimneys. Many lack stainless liners entirely. Clay tile flues from that era are now 60-80 years old, and what we regularly find is tile that has fractured not just from age but from industrial particulate settling into mortar joints over decades. Homeowners who bought these houses in the last five to ten years frequently have no record of the chimney ever being camera-inspected.
The northern half of Commerce City is a different story. Reunion and the surrounding master-planned communities are filled with 2000s-2020s homes running prefabricated zero-clearance fireplaces or direct-vent gas inserts. Those need a completely different service approach than a 1958 masonry chimney, and we treat them that way.
Our Main Commerce City Services
Chimney cleaning is the starting point for most Commerce City homes, but two related services come up just as often on this side of town.
Fireplace Services in Commerce City
Older Commerce City homes with original masonry fireplaces often have dampers that no longer seal, fireboxes with cracked refractory panels, or smoke that rolls back into the living room on windy days. We inspect the full system, identify what is actually causing the problem, and repair or replace only what needs it. For homes in Reunion and other newer neighborhoods, this usually means servicing gas inserts and direct-vent units that have never been touched since installation. Fireplace Services in Commerce City covers the full range.
Chimney Cap & Crown in Commerce City
The wind exposure in Commerce City makes a damaged crown or missing cap a fast-moving problem. Once the crown cracks, water gets into the masonry and every freeze widens the damage. We replace crowns with a proper overhang and drip edge, and install caps sized to the flue. On older homes near the refinery corridor, we also check for cap corrosion caused by years of airborne particulate. Chimney Cap & Crown in Commerce City has details on both jobs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Commerce City
Chimney cleaning in Commerce City is not a one-size-fits-all job. A 1955 ranch home with a clay tile flue that has been absorbing industrial haze for six decades needs a different approach than a 2018 Reunion home with a factory-built fireplace. The common thread is this: creosote, soot, and debris have to come out before anyone can tell you whether the chimney is actually safe to burn. Our Chimney Sweep work always includes a camera-scan inspection, because you cannot see a cracked tile or a failing mortar joint with a flashlight from the roof.
Level 1 Inspection
Signs you need it
You burn regularly and have not had the chimney looked at in more than a year, or you just bought the house and have no record of the last sweep.
What it costs in Commerce City
A Level 1 inspection runs $169-$289 when paired with a standard sweep in Commerce City.
How we do it
We check the accessible portions of the flue, the firebox, the damper, and the exterior masonry, then document what we find with photos.
Creosote Removal
Signs you need it
You see shiny black or tar-like buildup on the flue walls, or you have burned a lot of unseasoned wood.
What it costs in Commerce City
Heavy creosote removal in Commerce City runs $200-$600 depending on the flue length and the stage of the buildup.
How we do it
We use rotary brushes and specialized rods to break up the creosote, then vacuum everything out and re-inspect the flue with the camera.
Level 2 Inspection
Signs you need it
You have had a chimney fire, are selling the home, or have never seen the inside of your flue on camera.
What it costs in Commerce City
A Level 2 camera inspection runs $250-$450 in Commerce City, and it is included with most repair quotes.
How we do it
We run a camera down the entire flue length, document every foot, and give you the photo record before we discuss any repair work.
Soot Removal
Signs you need it
You have a wood-burning fireplace with a visible dust layer, or you have been burning softwoods that produce heavy soot.
What it costs in Commerce City
Soot removal in Commerce City runs $169-$289 as part of a standard sweep, or $150-$250 as a standalone job.
How we do it
We brush the flue, clean the smoke chamber and firebox, and bag the debris for disposal.
Annual Sweep
Signs you need it
It has been 12 months or more since the last cleaning, or you can smell smoke even when the fireplace has been cold for days.
What it costs in Commerce City
Annual sweeping in Commerce City runs $169-$289 for a standard open fireplace.
How we do it
We inspect the crown and cap, brush the flue from top to bottom, clean the smoke chamber, and leave the firebox clean and covered.
What Chimney Sweep Costs in Commerce City
| Item | Typical range in Commerce City |
|---|---|
| Standard chimney sweep with Level 1 inspection | $169-$289 |
| Heavy creosote removal | $200-$600 |
| Level 2 camera inspection | $250-$450 |
How often should a chimney be swept in Commerce City?
Every year if you burn wood, regardless of how often. In Commerce City, we also recommend an annual check because wind-driven moisture finds its way into crown cracks quickly, and catching that early costs hundreds instead of thousands.
What does Level 2 mean at Emberly Chimney Cleaners?
Level 2 is our baseline camera inspection, not an upsell. We send a camera down the full flue, document what we see, and hand you the photo record. Call (980) 580-8641 for a written price before any work is scheduled.
Chimney Repair in Commerce City
Chimney repair in Commerce City is driven by two things: wind and water. The flat, exposed terrain means every mortar joint and crown on the south side of town gets hit harder by freeze-thaw cycles than most of metro Denver, and the mid-century masonry is old enough that those joints are often the original work. Our Chimney Repair team fixes what is actually broken, no more, and you get a written scope and price before anyone starts.
Mortar Repointing
Signs you need it
You can see gaps in the mortar joints, or you can scrape mortar out with a fingernail.
What it costs in Commerce City
Repointing in Commerce City runs $35-$55 per square foot, with most partial jobs landing between $600 and $1,500.
How we do it
We grind out the failed mortar to a consistent depth, pack in new Type N mortar matched to the original color, and tool the joints to shed water.
Chimney Waterproofing
Signs you need it
The brick darkens or stays wet after rain, or you see efflorescence, the white mineral staining that indicates water moving through masonry.
What it costs in Commerce City
Chimney waterproofing in Commerce City runs $250-$500 for a typical single-flue masonry chimney.
How we do it
We clean the masonry, repair any damaged joints, and apply a vapor-permeable siloxane sealer that lets the brick breathe while blocking bulk water.
Flashing Repair
Signs you need it
You have a water stain on the ceiling near the chimney, or the existing flashing is cracked, lifted, or covered in tar patches.
What it costs in Commerce City
Flashing repair in Commerce City runs $400-$1,200 depending on the roofline and the extent of the damage.
How we do it
We pull the old flashing, inspect the roof deck beneath it, and install new step and counter flashing sealed to the masonry.
Spalling Brick Repair
Signs you need it
The brick faces are popping off in flakes or chunks, especially near the top of the chimney.
What it costs in Commerce City
Spalling brick replacement in Commerce City runs $40-$70 per brick, plus $300-$800 for scaffolding on taller chimneys.
How we do it
We cut out the damaged brick, install matched replacements, and correct whatever water-entry problem caused the spalling in the first place.
What Chimney Repair Costs in Commerce City
| Item | Typical range in Commerce City |
|---|---|
| Mortar repointing (partial) | $600-$1,500 |
| Flashing repair | $400-$1,200 |
| Chimney waterproofing | $250-$500 |
Should I repair or rebuild my Commerce City chimney?
If the damage is limited to mortar joints, flashing, or a few bricks, repair is usually the right call. If the masonry is leaning, the flue is completely compromised, or the crown has failed to the point of structural water damage, a rebuild costs less than repeated patch jobs. We give you photos and plain language on which path makes sense before you spend anything.
Why do Commerce City chimneys crack more than other areas?
Because the city sits flat and exposed. Freeze-thaw cycling hits every masonry surface harder here, and homes built in the 1940s-1960s often have original mortar and crowns that were never designed for this kind of exposure. Call (980) 580-8641 and we’ll show you exactly what is going on.
Chimney Liner & Rebuild in Commerce City
Chimney liner and rebuild work in Commerce City is the end game of a problem that has been building for decades. The older southern homes were built with clay tile flues, and between age, industrial exposure, and the Front Range’s hard freeze-thaw cycles, many of those tiles are now cracked, shifted, or missing entirely. Our Chimney Liner & Rebuild service replaces those failing systems with stainless liners from DuraFlex, HeatShield, or Gelco, and rebuilds masonry only where the structure actually demands it.
Stainless Steel Liner
Signs you need it
Your clay tile flue is cracked or missing sections, or you are switching from an open fireplace to a wood stove or insert.
What it costs in Commerce City
A stainless steel liner in Commerce City runs $2,500-$5,500 installed, depending on the flue length and the appliance it serves.
How we do it
We size the liner to the appliance, drop it through the existing flue, insulate it where needed, and seal the top and bottom.
Liner Replacement
Signs you need it
You have cracked or spalling clay tiles visible from the top, or the camera inspection shows gaps where smoke and heat can escape into the masonry.
What it costs in Commerce City
Liner replacement in Commerce City runs $2,500-$6,500 for a standard single-story home.
How we do it
We either remove the old clay tiles and install a rigid stainless liner, or place a flexible liner inside the existing flue if the dimensions allow.
Partial Rebuild
Signs you need it
The top few courses of brick are loose, the crown is gone, but the lower structure is still sound.
What it costs in Commerce City
A partial rebuild in Commerce City runs $2,500-$6,000 depending on how many courses need to come out and the roof access.
How we do it
We take down the damaged sections, rebuild with matched brick, cast a new crown with a proper drip edge, and re-flash the transition.
Full Chimney Rebuild
Signs you need it
The masonry is leaning, the flue has completely failed, or water has damaged the structure to the point where patching no longer makes sense.
What it costs in Commerce City
A full rebuild in Commerce City runs $8,000-$15,000 from the roofline up, with taller chimneys and complex rooflines landing higher.
How we do it
We remove the existing chimney above the roofline, rebuild with new masonry and a stainless liner system, and install a proper crown and cap.
What Chimney Liner & Rebuild Costs in Commerce City
| Item | Typical range in Commerce City |
|---|---|
| Stainless steel liner (installed) | $2,500-$5,500 |
| Liner replacement (standard home) | $2,500-$6,500 |
| Full chimney rebuild | $8,000-$15,000 |
Do I really need a new liner, or is this an upsell?
You should never accept a liner recommendation without seeing the camera footage. We do not recommend a liner unless the camera shows cracked tiles, gaps, or damage that creates a real safety risk. You get the photos, and if the liner can safely wait, we tell you that plainly.
Can a cracked clay liner be repaired instead of replaced?
Sometimes yes, if the damage is limited to a small section. HeatShield is a genuine option for localized repairs in Commerce City, but it only works when the flue is otherwise sound. The camera tells us which path applies to your chimney. Call (980) 580-8641 for a written quote.
Brands We Service in Commerce City
We stock and install liners and components from DuraFlex, HeatShield, Gelco, and Copperfield. Parts are sourced through Haven’s buying network specifically to keep Commerce City customer prices honest, and most common components are on hand locally, not ordered in after we look at the job. Our brands page has the full list.
Pricing for Chimney Cleaning in Commerce City, CO
| Service | Typical range in Commerce City |
|---|---|
| Standard chimney sweep with Level 1 inspection | $169-$289 |
| Heavy creosote removal | $200-$600 |
| Level 2 camera inspection | $250-$450 |
| Soot removal (standalone) | $150-$250 |
| Mortar repointing (partial) | $600-$1,500 |
| Flashing repair | $400-$1,200 |
| Chimney waterproofing | $250-$500 |
| Spalling brick replacement | $40-$70 per brick |
| Stainless steel liner (installed) | $2,500-$5,500 |
| Full chimney rebuild | $8,000-$15,000 |
What pushes a Commerce City job toward the top of these ranges is roof access: steep pitches, tall chimneys, or tight setbacks add labor time. What does not change is the upfront pricing. Written price, written scope, written warranty, every time, before any work starts. That is Clause 1 of the Haven Standard.
Neighborhoods We Serve in Commerce City
We cover all of Commerce City, from the mid-century blocks near the refinery corridor to the newer Reunion neighborhoods and everything between. Most areas can be scheduled within a few days of your call, and we text you when the tech is on the way.
- Reunion
- Fronterra Village
- Buffalo Run
- Potomac Farms
- Turnberry
Service Area - Cities Near Commerce City
Our crews serve Commerce City and the surrounding metro area. If you are in Thornton, CO, Aurora, CO, Westminster, CA, or Denver, CO, we can typically schedule a sweep or inspection within the same week. Dispatch and scheduling are coordinated from our Denver office; crews serve Commerce City locally.
Serving Commerce City, CO - Our Local Coverage Area
We’re based in the Commerce City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Commerce City
Most standard chimney sweeps and inspections do not require a permit in Commerce City. Masonry rebuilds and liner replacements can trigger permit requirements depending on the scope. We handle the paperwork when it is needed and tell you upfront if your job requires one.
Most Commerce City neighborhoods can be scheduled within a few days of your call, and we text you when the technician is on the way with the name of the person coming to your door. Live phone support runs 24/7, so you are never leaving a voicemail.
Every visit ends with a documented photo record: images from inside the flue, the condition of the crown and masonry, and what was done. That is Clause 4 of the Haven Standard. You also get a written warranty, and the 365-Day Done Right Promise backs the work. Call (980) 580-8641 for a free estimate, written before any work is scheduled.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Commerce City Customers Say
"They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A.