Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Fort Worth, TX
Chimney cleaning in Fort Worth runs $189 to $289 for a standard sweep with a Level 1 inspection, and most jobs take 60 to 90 minutes. What makes Fort Worth different is the Blackland Prairie clay under your foundation and the blue northers that drop temperatures 30 degrees in a few hours. Homes in Fairmount or Ryan Place built in the 1920s often have clay flue tiles that shifted decades ago, and a camera inspection is the only way to see it. Call (980) 580-8641 to get a written price before anyone sets foot in your home.
Why Fort Worth Homes Are Different
Fort Worth sits on expansive clay that shrinks and swells through every drought and rain cycle. That movement transfers straight up through brick chimneys, because masonry doesn’t flex. In neighborhoods like Fairmount (76104) and Ryan Place (76110), we regularly see chimneys that have separated from house framing by half an inch or more. The gap hides behind siding or in the attic, and the homeowner never knows until a camera goes down the flue.
The climate adds another layer. Fort Worth’s blue northers can drop the temperature 30°F or more within hours, and a fireplace that sat idle for nine months suddenly runs hot. A single heavy-use weekend can deposit enough creosote to create a Level 2 hazard in a chimney that looked clean at the start of fall. That’s why we recommend an annual sweep before the first cold snap, not after it.
Older homes add their own complications. Many 1920s to 1940s Craftsman bungalows and Tudor Revivals in Mistletoe Heights still have original single-wythe brick chimneys with no liner at all. Postwar ranch homes from the 1950s and 1960s across the south and east sides often have decorative fireplaces with undersized flues and shallow fireboxes. Neither was built to modern clearance codes, and both need closer inspection than a quick look with a flashlight.
Our Main Fort Worth Services
Two services account for most of the calls we get from Fort Worth homeowners beyond routine cleaning, and both have their own dedicated Fort Worth pages with full pricing and local detail.
Fireplace Services in Fort Worth
Fireplaces in Fort Worth run the full range from original 1920s masonry to modern prefab units, and the work they need varies just as widely. We inspect fireboxes, dampers, smoke chambers, and hearth clearances, then photograph everything so you can see exactly what we found. When a fireplace has been dormant for months and then pushed hard during a blue norther, small problems surface fast. See Fireplace Services in Fort Worth for the full breakdown.
Chimney Cap & Crown in Fort Worth
A cracked chimney crown in Fort Worth doesn’t stay small for long. Summer heat above 100°F accelerates spalling, and winter freeze-thaw cycles drive water into every crack and widen it. The result is water running down the flue walls and into the masonry. We replace crowns, install caps, and seal the top of the chimney so it actually sheds water. Details, photos, and pricing are on the Chimney Cap & Crown in Fort Worth page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Fort Worth
Chimney sweep in Fort Worth is the one service every fireplace home needs before burning season, because our climate punishes chimneys in two ways at once. Expansive clay soil shifts the masonry, and long idle stretches followed by sudden cold snaps bake creosote into the flue walls. If you haven’t had the flue looked at in over a year, the best move is a Chimney Sweep with a camera inspection, not a flashlight check from the firebox.
Level 1 Inspection
Signs you need it
You burn regularly every winter and the chimney is due for its annual check, or you’ve just bought the house and want a baseline.
What it costs in Fort Worth
A Level 1 inspection in Fort Worth typically runs $99 to $189, and is included free with any cleaning.
How we do it
We inspect the accessible portions of the firebox, damper, and flue with a camera, then hand you a written report with photos.
Creosote Removal
Signs you need it
You notice a sharp, tar-like smell near the fireplace, or the damper feels sticky and black residue rubs off on your hand.
What it costs in Fort Worth
Creosote removal in Fort Worth runs $189 to $289, the standard sweep price, but heavy Class III glaze can run $350 to $600 with rotary treatment.
How we do it
We brush the flue with the right head for the creosote stage, then run a camera to confirm the flue walls are clean and photo-document the result.
What Chimney Sweep Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Standard chimney sweep with Level 1 inspection | $189 - $289 |
| Level 2 camera inspection (full flue scan) | $99 - $189 |
| Heavy creosote / Class III glaze removal | $350 - $600 |
How often should I have my chimney swept in Fort Worth?
Once a year before burning season. Fort Worth fireplaces sit idle for months, then get pushed hard during the first blue norther. That pattern deposits creosote fast. Call (980) 580-8641 and we’ll schedule it before the cold hits.
Can a dirty chimney really catch fire?
Yes. Creosote ignites at around 450°F, and a hot fire in a cold flue can reach that quickly. The camera scan we run after every sweep shows you exactly what remained. Call (980) 580-8641 for a written quote.
Chimney Repair in Fort Worth
Chimney repair in Fort Worth often starts with a problem that has nothing to do with fire. Blackland clay heaves the foundation, the chimney shifts independently of the house slab, and mortar joints crack open. Water enters, spalling begins, and what might have been a $400 repointing job becomes a rebuild if it’s left to ride out a few more freeze-thaw cycles. A Chimney Repair starts with a camera inspection so we can show you the damage before quoting a dollar figure.
Mortar Repointing
Signs you need it
You see crumbling or missing mortar between bricks, especially near the roofline and the top two feet of the chimney.
What it costs in Fort Worth
Mortar repointing in Fort Worth typically runs $400 to $800 for a partial chimney, and $800 to $1,800 for a full chimney.
How we do it
We grind out the damaged joints to a proper depth, tuck fresh mortar that matches the original color and strength, then photograph the finished work.
Flashing Repair
Signs you need it
You see water stains on the ceiling near the fireplace, or rust and lifted flashing at the roofline where the chimney meets the shingles.
What it costs in Fort Worth
Flashing repair in Fort Worth runs $350 to $800, with full replacement and new counter-flashing from $800 to $1,400.
How we do it
We cut back the old flashing, install new step and counter-flashing sealed to the chimney and the roofline, and test with water before we leave.
What Chimney Repair Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Mortar repointing (partial) | $400 - $800 |
| Mortar repointing (full chimney) | $800 - $1,800 |
| Flashing repair | $350 - $800 |
Is chimney spalling serious in Fort Worth?
Yes. Spalling means the brick face is breaking away because water has penetrated and frozen. In Fort Worth’s freeze-thaw cycles it worsens every winter. Call (980) 580-8641 to get a camera look before the next freeze.
Do I need a permit for chimney repair in Fort Worth?
Most repointing and flashing work doesn’t require a permit, but full rebuilds sometimes do depending on scope and location. We’ll tell you in writing before anything starts. Call (980) 580-8641 for specifics.
Chimney Liner & Rebuild in Fort Worth
Chimney liner and rebuild work in Fort Worth is common in the older neighborhoods where original clay tiles have sheared or offset from decades of soil heave. In Fairmount and Ryan Place, we regularly find 1920s and 1930s flue tiles that shifted along their length, invisible from the firebox but obvious on a camera scan. A Chimney Liner & Rebuild is the fix when the flue can no longer safely contain heat and combustion gases.
Stainless Steel Liner
Signs you need it
Your clay tile flue is cracked, offset, or missing sections, and the camera shows gaps where heat and gas can reach the surrounding masonry.
What it costs in Fort Worth
Stainless steel liner installation in Fort Worth typically runs $2,400 to $4,000 for a standard single-story chimney.
How we do it
We size the liner to the appliance and flue dimensions, drop it down, insulate as needed, and secure it with a top plate and cap, then scan it on camera.
Partial Rebuild
Signs you need it
The top few courses of brick above the roofline are spalled, loose, or leaning, but the chimney below the roofline is structurally sound.
What it costs in Fort Worth
Partial chimney rebuild in Fort Worth runs $2,500 to $5,000 depending on height, access, and brick matching needs.
How we do it
We tear down to sound masonry, rebuild the top courses with proper mortar and bond, install a new crown and cap, and photo-document the whole job.
What Chimney Liner & Rebuild Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Stainless steel liner installation | $2,400 - $4,000 |
| Partial chimney rebuild | $2,500 - $5,000 |
| Full chimney rebuild | $4,000 - $9,500 |
Do I really need a new liner, or can it wait?
If the camera shows gaps or cracks, it can’t wait. An unlined or damaged flue lets heat reach wood framing, and that’s how chimney fires become house fires. Call (980) 580-8641 for a straight answer with photos.
What’s the difference between a partial and full rebuild in Fort Worth?
A partial rebuild replaces the chimney above the roofline only. A full rebuild tears down to the foundation, which we see in Fort Worth when soil heave has separated the entire stack. Call (980) 580-8641 for a written scope.
Brands We Service in Fort Worth
We stock and install liners and components from DuraFlex, HeatShield, and Copperfield, sourced through the Haven buying network to keep Fort Worth pricing honest. Most common parts are available locally within a day or two, and we always quote the brand and material in writing before work starts. See our brands for the full list.
Pricing for Chimney Cleaning in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| Standard chimney sweep with Level 1 inspection | $189 - $289 |
| Level 2 camera inspection (full flue scan) | $99 - $189 |
| Heavy creosote / Class III glaze removal | $350 - $600 |
| Mortar repointing (partial) | $400 - $800 |
| Mortar repointing (full chimney) | $800 - $1,800 |
| Flashing repair | $350 - $800 |
| Stainless steel liner installation | $2,400 - $4,000 |
| Partial chimney rebuild | $2,500 - $5,000 |
| Full chimney rebuild | $4,000 - $9,500 |
| Chimney waterproofing | $350 - $650 |
What pushes a Fort Worth price up is access and the clay soil damage. A steep roof on a 1920s Fairmount bungalow takes longer to work safely, and a chimney that has separated from the house slab needs more than a surface fix. Every quote is written, scoped, and warrantied before work starts, under Clause 1 of the Haven Standard.
Neighborhoods We Serve in Fort Worth
We work across the entire city, from the historic core to the postwar ranch neighborhoods and the newer developments on the periphery. Typical response for a camera inspection and written quote is within a few business days, faster during the pre-season window before blue norther weather hits.
- Fairmount (76104)
- Ryan Place (76110)
- Mistletoe Heights
- Wedgwood
- Arlington Heights
Service Area - Cities Near Fort Worth
We also serve several cities around Fort Worth, including Haltom City, TX, North Richland Hills, TX, and Hurst, TX. For homes further north in Bedford, NH, give us a call and we’ll confirm coverage. Dispatch and scheduling run out of our Dallas-Fort Worth office, with crews local to the area.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Fort Worth
A standard chimney sweep with a Level 1 inspection runs $189 to $289 in Fort Worth. Heavy creosote or Class III glaze removal runs $350 to $600. Every quote is written before work starts, so you’ll know the exact number before we begin. Call (980) 580-8641 for a free estimate.
Most cleaning, inspection, and repointing work doesn’t need a permit. Full rebuilds sometimes do, depending on scope, and some HOAs, particularly in newer developments, require written notice or approval before exterior masonry work. We’ll tell you in writing before anything starts. Call (980) 580-8641.
Creosote builds up over a long idle stretch, then a blue norther hits and you fire up the fireplace for the first time in nine months. That’s the highest-risk moment for a chimney fire. The camera inspection we run after every sweep shows you exactly what was removed. Call (980) 580-8641 to schedule before the cold front arrives.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V.