Fireplace Services in Hurst - Checked, Photographed, Then Priced

Chimney Cleaning in Hurst, TX

A chimney cleaning in Hurst typically costs between $189 and $329, and on most 1960s-to-1980s brick ranch homes the real issue isn’t soot, it’s what a decade of Tarrant County clay soil movement has done to the flue tiles. The dominant pattern we see across Hurst is a chimney that sat untouched through ten months of Texas heat, then gets lit the day a Blue Norther drops the temperature 35 degrees in six hours. That’s exactly when creosote buildup and hairline tile cracks turn a cozy night into a service call. Call (980) 580-8641 for a written quote before any work starts.

Call (980) 580-8641

Why Hurst Homes Are Different

Hurst’s residential core went up during the 1960s through 1980s Mid-Cities boom, which means a huge share of the housing stock is brick ranch with an original wood-burning fireplace. Those chimneys are now 40 to 60 years old. The clay flue tiles inside them have been sitting in a structure that Tarrant County’s expansive clay soils have been shifting for decades, and the mortar crowns on top have been baking under long, hot summers on south- and west-facing roofline exposures. Then a Blue Norther hits and the temperature drops 30-plus degrees in hours, and a chimney that hasn’t been looked at since last winter gets fired up impulsively.

The other thing that makes Hurst unique is chimney swifts. These federally protected migratory birds colonize uncapped chimneys in the city’s mid-century neighborhoods every spring, and once an active nest is present it’s illegal to remove it under the Migratory Bird Treaty Act. That means cap and crown work on original chimneys often has to be scheduled outside the roughly April-to-October swift window, or the job waits until the following winter. We plan around that calendar explicitly.

Our Main Hurst Services

Two services account for most of what Hurst homeowners call us about: fireplace issues that show up the first cold snap of fall, and chimney caps and crowns that have failed after decades of North Texas weather.

Fireplace Services in Hurst

Hurst homes from the 1960s through 1980s were built with wood-burning masonry fireplaces as standard, and the steel dampers installed then are now at the end of their service life. Warped or corroded dampers let conditioned air pour out of the house all summer and smoke roll in during winter. When we open one of these fireplaces in Hurst, we photograph what we find and put the price in writing before any repair starts. Fireplace Services in Hurst covers dampers, smoke chambers, and the firebox repairs these older homes typically need.

Chimney Cap & Crown in Hurst

The low-pitched rooflines on Hurst ranch homes leave chimney crowns fully exposed to sun, rain, and freeze-thaw cycling, and cracked crowns are among the most common findings on our camera inspections here. Water gets into the crown, freezes during a Blue Norther, and widens cracks that then let moisture into the flue and brick. Chimney Cap & Crown in Hurst details the crown repair and cap installation work, including the swift-season timing that matters in this city.

Before

After

Chimney Cleaning & Sweep in Hurst

Chimney cleaning and sweep in Hurst means removing creosote and soot from flues that have been in place since the Lyndon Johnson and Ronald Reagan years. The housing era matters because original clay tile liners from that period develop hairline cracks as the surrounding masonry shifts on Tarrant County’s expansive clay, and those cracks become a place where creosote embeds and can’t be brushed out. Since 2009 we’ve made the camera-scan inspection the default on every visit, not an add-on, and you get the photo record as part of the job. Chimney Cleaning & Sweep explains the full standard we work to.

Creosote Removal

Signs you need it

You notice a sharp, tar-like odor from the fireplace, or there’s visible black, shiny or flaky buildup inside the flue that the last sweep didn’t remove.

What it costs in Hurst

Creosote removal in Hurst runs $189 to $329 depending on the severity of the buildup and the length of flue we’re working through.

How we do it

We run rotary rods with a whip head down the flue to break Class I and Class II creosote off the tile walls, then sweep, then camera-scan the tile to document what remains and spot any cracks the buildup was hiding.

Level 2 Inspection

Signs you need it

You’re buying or selling a home in Hurst, the fireplace hasn’t been used in years, or something changed since the last cleaning: water in the firebox, spalling brick, a chimney fire, or a new appliance being connected.

What it costs in Hurst

A Level 2 inspection in Hurst runs $689 and up depending on the access points and height of the chimney.

How we do it

We run a full internal camera scan of the flue, check the attic, chase, and exterior from top to bottom, and deliver a written report with photos and annotated findings before we quote any repair.

What Chimney Cleaning & Sweep Costs in Hurst

How often should a chimney be cleaned in Hurst?

Every year if you burn more than a cord of wood per season in Hurst, and every two years at minimum even if you rarely light fires. The long dormant stretches in this climate let creosote sit and harden, and Blue Norther cold fronts create the sudden high heat that can ignite it.

Does a chimney cleaning include an inspection in Hurst?

Yes. Every cleaning in Hurst includes a Level 1 visual inspection as the baseline. If we see anything that suggests a deeper problem, we recommend a Level 2 camera scan and show you the photos before quoting anything. Call (980) 580-8641 to book a sweep at a time that works for your schedule.

Chimney Repair in Hurst

Chimney repair in Hurst is usually about water, not fire. The brick and mortar on 40-to-60-year-old ranch chimneys have been absorbing rain and freeze-thaw cycles for decades, and the expansive clay soils underneath the slab have been shifting the whole structure seasonally. By the time a homeowner sees spalling brick or a leaning chimney, the damage has usually been developing for years, and the fix is specific to what the camera and mortar testing show. One thing we stress: nobody should do mortar or flashing work off a visual guess. Chimney Repair covers the inspection-first approach we’ve used on more than 38,000 chimneys since 2009.

Mortar Repointing

Signs you need it

Mortar joints between the bricks are receding, crumbly, or missing in patches, especially on the south- and west-facing sides that take the brunt of Hurst’s summer sun.

What it costs in Hurst

Mortar repointing in Hurst runs $45 to $85 per square foot depending on access and the depth of the joint removal needed.

How we do it

We grind out the failed mortar to a consistent depth, match the original mortar color and texture, repack the joints, and seal the surface so the repair doesn’t stand out from the rest of the chimney.

Flashing Repair

Signs you need it

You see water staining on the ceiling near the fireplace, dampness in the attic around the chimney chase, or rust at the base of the chimney where the metal meets the roofline.

What it costs in Hurst

Flashing repair in Hurst runs $350 to $850 depending on how much of the existing flashing can be reused and the pitch of the roof we’re working from.

How we do it

We replace the step, counter, and apron flashing where needed, seal the joints to the brick, and document the repair with photos so you have a record of what was done and where.

What Chimney Repair Costs in Hurst

Can a cracked flue tile be repaired, or does it need a liner?

Hairline cracks in clay flue tiles can sometimes be addressed with a repair coating, but if the tile is shattered or the cracks run through multiple tiles, a stainless liner is the fix. We always show you the camera footage before recommending one route or the other, and the written price comes before the work starts.

How long does a chimney repair last in Hurst?

Proper mortar repointing on a stable chimney typically lasts 20 to 30 years; flashing repairs should last 15 to 20 if the roof work was done right. Hurst’s clay soil movement can shorten that if the chimney itself is shifting, which is something the inspection will identify. Call (980) 580-8641 and we’ll put the findings in writing.

Chimney Liner & Rebuild in Hurst

Chimney liner and rebuild work in Hurst is the endpoint of what this city’s original 1960s-to-1980s chimneys most often face: clay tiles cracked by soil movement and freeze-thaw stress, and brick that water has turned to spalled, crumbling face. The good news is that a stainless steel liner can bring an old flue back to code without rebuilding the whole chimney, and when a rebuild is necessary, the written scope tells you exactly what’s coming down and what’s going back up. No work starts in Hurst without a camera scan and a written price. Chimney Liner & Rebuild walks through both options.

Stainless Steel Liner

Signs you need it

The camera scan shows cracked, spalled, or missing clay tiles, or the old liner is unlined in places and the smoke is moving through raw masonry.

What it costs in Hurst

A stainless steel liner installation in Hurst runs $3,200 to $6,500 depending on the flue length, the liner grade, and whether an insulation wrap is needed.

How we do it

We size the liner to the exact flue diameter required for the appliance, drop it in from the top, connect it at the breach, insulate where spec’d, and camera-scan the installed liner to confirm it’s seated correctly and sealed.

Partial Rebuild

Signs you need it

The top several courses of brick are loose, spalled, or missing, or the crown and the top 18 to 24 inches of the chimney are the only parts that show real structural deterioration.

What it costs in Hurst

A partial chimney rebuild in Hurst runs $1,800 to $4,000 depending on how many courses come down and whether scaffolding or a lift is required.

How we do it

We dismantle the deteriorated sections, replace what’s needed, bond the new brick to the old at the joint lines, pour a new crown or patch the existing one, and photograph the whole rebuild before we leave.

What Chimney Liner & Rebuild Costs in Hurst

Do I really need a new liner, or can yours be patched?

If the camera scan shows a single hairline crack and no shifting, a repair coating can sometimes work. If tiles are missing, cracked through, or spalled, a patch won’t last because the flue has already lost its structural seal. We show you the footage and let you see the condition yourself before any quote is written.

How long does a stainless liner last in Hurst?

A properly installed stainless steel liner typically lasts 25 to 40 years, and Hurst’s climate won’t shorten that as long as the top is capped and the crown is intact. The liner we source through brands like DuraFlex carries a written warranty, and the install is documented with photos. Call (980) 580-8641 for a written quote.

Brands We Service in Hurst

We stock and install parts from Copperfield, DuraFlex, HeatShield, and Gelco, sourced through Haven’s buying network to keep pricing honest in Hurst. Standard parts are typically available same week, and most liner and cap jobs in Hurst don’t wait on freight. See our brands for the full line.

Pricing for Chimney Cleaning in Hurst, TX

Neighborhoods We Serve in Hurst

We work across Hurst, from the original mid-century subdivisions near Pipeline Road and Bellaire Drive to the newer-built pockets along Precinct Line Road. Most Hurst scheduling is done within a few days, with spring and fall the busiest windows as homeowners work around swift season and the first cold front.

• Richland Terrace
• Midtown Hurst
• Shady Oaks
• Hurstview Hills
• Brookside

Service Area - Cities Near Hurst

Emberly Chimney Cleaners serves Hurst and the surrounding Mid-Cities area from our Dallas-Fort Worth dispatch office. If you’re in a neighboring community, we also cover North Richland Hills, TX, Bedford, NH, Colleyville, TX, and Haltom City, TX with the same written-price, camera-scan standard.

FAQs About Chimney Cleaning in Hurst