Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Marietta
A chimney cap and crown repair in Marietta typically runs $325-$780 for a standard crown rebuild with coating, and $190-$520 for cap replacement depending on flue size and material. Most jobs are booked within 5-7 business days, and every visit starts with a camera inspection so you see the damage before you pay for a fix. Our crews know the difference between a 1920s masonry chimney near Marietta Square and a 1980s prefab flue in East Cobb, because that difference changes everything about how the cap and crown get installed. Call (980) 580-8641 for a written quote before any work starts.
Why Emberly Chimney Cleaners Is Marietta’s Preferred Chimney Cap & Crown Company
Marietta homeowners call us because we document everything. Clause 4 of the Haven Standard requires a photo record on every job, and that’s been our practice since 2009, long before insurers started asking for it. When our techs diagnose a cracked crown or a corroded cap, you get camera footage showing exactly what they saw, plus a written price and written scope before anyone touches a tool. No flashlight inspection called a “Level 2.” No phone-call estimate that changes once someone’s on your roof.
We serve the full Marietta area weekly, from the historic district around the Square up through East Cobb and the neighborhoods west of I-75. Background-checked, uniformed technicians arrive with license information on the page and a named tech assigned to your job. Our dispatchers coordinate from the Atlanta office, but the crews running Marietta routes work this service area regularly enough to know that a chimney on Powder Springs Street needs a different crown approach than one in a subdivision off Johnson Ferry Road.
Our Chimney Cap & Crown Services in Marietta
Our Chimney Cap & Crown team handles both masonry chimneys and factory-built metal flue systems. That dual-system expertise matters in Marietta more than most places. Here’s what we do:
Cap Installation
A properly sized cap keeps rain, pine needles, squirrels, and birds out of your flue. In established Marietta neighborhoods, loblolly pine needles are the number one cap-clogging culprit. We measure the flue opening, check the crown condition beneath it, and install a stainless or copper cap rated for your specific flue type. Copperfield and Gelco caps are regular options on our trucks, and we never mount a cap on a crown that’s already failing, because the cap only works if the surface beneath it is sound.
Cap Replacement
In 1980s-90s East Cobb tract homes, we routinely find galvanized caps corroded at the mounting legs. The legs separate, the cap tilts, and rainwater funnels straight down the metal flue. We pull the old cap, inspect the flue joint beneath it with a camera, and replace it with a stainless cap sized to the factory-built system. For original clay tile flues around Marietta Square, replacement often means a custom-fabricated multi-flue cap, because stock box-store caps rarely fit two terra cotta flues side by side.
Crown Repair
Marietta’s oldest chimneys, the century-old masonry stacks around the Square, often have poured concrete crowns that have spalled badly. Cracks let water run down into the smoke chamber and erode the flue liner. We grind down the deteriorated surface, rebuild the form, and pour a new crown with a proper overhang and drip edge. This is the single most cost-effective repair on an older Marietta chimney, because a functioning crown prevents nearly every downstream problem: liner spalling, creosote bonding, efflorescence on the brick below.
Crown Coating
A crown sealant or coating is a preventive step, not a repair. After a crown is rebuilt or if an existing crown is still structurally intact, we apply a flexible coating like Gelco’s crown seal system to bridge hairline cracks and shed water. In Marietta’s humid subtropical climate, where freeze-thaw cycles are less severe than up north but heavy summer rains are constant, a coated crown just lasts longer. The coating is rarely more than $150-$300 on top of a crown repair, and we’ll show you the cracks on camera before recommending it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Marietta
We stock and install caps and crown materials from Copperfield, Gelco, and DuraFlex, all sourced through the Haven buying network specifically to keep customer pricing honest. For the prefab systems common in East Cobb, we match factory specifications rather than forcing a universal part that doesn’t seal. For masonry chimneys around Marietta Square, we fabricate custom caps when stock sizes won’t cover two or three flues at once. Parts arrive fast because our crews run Marietta routes weekly, so most cap and crown jobs don’t need a second trip for materials.
Common Chimney Cap & Crown Problems We See in Marietta Homes
- Cracked clay tile crown caps on pre-WWII chimneys near Marietta Square. The original poured crowns on these stacks are often 60-100 years old. Water intrusion through crown cracks spalls the clay tile liners below, and the roughened liner surface then bonds with creosote much faster than a smooth liner would.
- Corroded galvanized caps on 1980s zero-clearance fireplaces in East Cobb. Builders installed cheap galvanized caps that fail at the mounting legs after 10-15 years. Once the cap separates, pine needles and rain get into the metal flue and accelerate glazed creosote formation on the few cold days a year the fireplace gets used.
- Missing or undersized caps on short flues in older Marietta neighborhoods. Short flues draft poorly to begin with. Add a missing cap and a squirrel nest or a wad of pine needles, and the first cold snap pushes smoke back into the living room. This is one of the most common December service calls we get in Marietta.
- Spalling concrete crowns on chimneys built without a drip edge. Many older Marietta homes were built with crowns that don’t overhang the brick. Water runs straight down the masonry face, causing efflorescence and brick decay below the roofline. A correctly poured crown with a 2-inch overhang and drip edge stops this.
Pricing for Chimney Cap & Crown in Marietta, GA
A standard crown rebuild with coating in Marietta runs $325-$780, with the high end reflecting larger chimneys with multiple flues or extensive spalling. Cap installation runs $190-$520 depending on flue size, material (stainless is standard, copper costs more), and whether you need a custom multi-flue cap. Crown coating alone typically runs $150-$300. The honest variables: roof pitch, chimney height, flue count, and whether the crown beneath a cap needs work before installation. We give every Marietta customer a written price and written scope before work starts, and we honor the Free Second Opinion policy if you bring a competitor’s written quote.
We Also Serve Cities Near Marietta
Our crews cover the surrounding metro from the same Marietta-based routes. That includes Chimney Cap & Crown in Marietta and regular stops in Smyrna, Kennesaw, Atlanta, and Mableton. Each city gets the same written-price, camera-first standard we run everywhere under the Haven Standard.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Marietta
Age and materials are the difference. The homes around Marietta Square are mostly late-1800s to early-1900s brick with original poured concrete crowns that have been weathering for 70-100 years. East Cobb track homes built in the 1980s-90s often have factory-fabricated chimney systems with metal crowns or prefab caps that fail from corrosion rather than cracking. Neither failure is worse, but they require different repairs. Call (980) 580-8641 for a camera inspection and written quote specific to your chimney.
Most of the time the liner does not need replacement first. We install caps on original clay tile flues regularly, but we first run a camera down the flue to check for spalled tile segments or blockages. If the liner is cracked but not deteriorated, a cap and crown can be installed without relining. If the camera shows significant failure, we’ll show you the footage and give you a written recommendation. Nothing gets sold without evidence. Call (980) 580-8641 to book a Level 2 inspection.
Pine creates two problems. First, its resin content produces heavy creosote far faster than oak or hickory, which means your flue accumulates dangerous deposits with very few burns. Second, the needles from loblolly and Virginia pines in Marietta get onto your roof and into an uncapped or undersized flue, which compounds the creosote problem by blocking draft. A properly sized cap with a mesh screen reduces the needle problem, but the creosote risk from burning pine is a chimney sweep issue, not a cap issue. Call (980) 580-8641 and we’ll tell you straight what your cap can and can’t do.
Corrosion at the mounting legs. The galvanized caps builders installed on zero-clearance fireplace flues in East Cobb fail where the legs attach to the flue pipe, usually after 10-15 years of exposure. Once the cap separates, rain runs down the inside of the metal flue and accelerates creosote glaze from the handful of times the fireplace gets used each winter. We replace these with stainless caps sized to the factory flue dimensions. Call (980) 580-8641 for a written quote.
Yes, if the crown shows hairline cracks on camera. Marietta’s humid summers push water into even small crown cracks, and that water sits in the masonry regardless of how often you burn. The damage happens in August, not January. A crown coating costs $150-$300 and extends the life of the crown significantly. If the camera shows no cracks, we’ll tell you to skip it. Call (980) 580-8641 for an inspection and honest recommendation.
Contact Emberly Chimney Cleaners in Marietta
Every job starts with a camera inspection, a written price, and a written scope. You’ll know what’s wrong, what it costs, and whether it can wait. The 365-Day Done Right Promise backs every cap and crown job we complete in Marietta. Call (980) 580-8641 or book online for a free estimate. Corrine Halstead oversees our cap and crown work across the metro, and she’s happy to answer cost questions over the phone before you commit to anything.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, coordinating Marietta-area chimney cap and crown work under the Haven Standard.