Fireplace Services in Marietta - Inspected First, Then Quoted in Writing

Chimney Cleaning in Marietta, GA

Chimney cleaning in Marietta typically costs between $189 and $329 for a standard sweep when paired with a Level 1 inspection, and most jobs are completed in under two hours. What makes Marietta work different is the housing stock itself: century-old masonry chimneys around Marietta Square behave nothing like the factory-built metal flue systems that dominate East Cobb subdivisions from the 1980s and 90s. If you’re seeing soot fall into the firebox or you can’t remember the last time the flue was looked at, call (980) 580-8641 and we’ll give you a written price before any work starts.

Call (980) 580-8641

Why Marietta Homes Are Different

Marietta’s humid subtropical climate means most fireplaces get used 20 to 40 days a year, almost always in short bursts during cold snaps rather than steady winter burning. That pattern creates a specific problem: a cold firebox lit infrequently at low draft temperatures produces glazed, third-stage creosote faster than a fireplace burned daily all winter. A lightly used fireplace can be more hazardous than a heavily used one, and we see that pattern constantly in Cobb County.

The housing stock splits the work in two. Around Marietta Square, late-1800s and early-1900s brick homes still carry original single-flue clay tile liners, many of them spalled and cracked from decades of thermal cycling. Those liners can’t be cleaned aggressively without risk of further damage. In East Cobb and northwest Marietta, the tract homes built during the Atlanta metro boom came with prefabricated zero-clearance fireplaces and lightweight metal or flexible liner flue systems that corrode and separate at the joints over time. A single day’s route in Marietta can require a full masonry relining consultation in the morning and a factory-built insert service call in the afternoon. Dual-system expertise isn’t a marketing point here; it’s the basic requirement.

There’s also the pine factor. The loblolly and Virginia pines along the Kennesaw Mountain foothills and older East Cobb subdivisions drop limbs constantly, and plenty of homeowners burn that downed pine as free firewood. Pine’s resin content accelerates creosote buildup dramatically compared to oak or hickory. A flue cleaned in October can carry dangerous deposits by New Year’s if pine burned through the holidays. We ask about wood type on every Marietta job because it changes the re-clean interval.

Our Main Marietta Services

Beyond sweeping and cleaning, Marietta homeowners call us most about two things: fireplaces that won’t draw or ignite properly, and caps or crowns that have failed and let water into the flue. Here’s how we handle each.

Fireplace Services in Marietta

A fireplace that smokes into the room or won’t stay lit usually points to a draft issue, a clogged flue, or a failing damper, and Marietta’s mix of masonry and prefabricated systems means the diagnosis varies block by block. We inspect the firebox, damper, smoke chamber, and flue with a camera, then hand you a written scope with photos and a price. Many East Cobb prefab units need replacement refractory panels or damper repair rather than full replacement, and we’ll tell you when that’s the case. Learn more about Fireplace Services in Marietta.

Chimney Cap & Crown in Marietta

Water is the single biggest destroyer of Marietta chimneys, and the cap and crown are the first line of defense. Around Marietta Square, old mortar crowns crack and let rain seep into the brick below, causing spalling and liner damage. In East Cobb, missing or rusted caps invite rain, birds, and squirrels into metal flue systems. We replace caps, repair or repour crowns, and document everything with photos. The full scope of the work is on Chimney Cap & Crown in Marietta.

Before

After

Chimney Sweep in Marietta

Chimney Sweep in Marietta is about matching the method to the chimney. A 1905 masonry flue with a fragile clay liner needs gentler tools and a slower pass than a 1990s metal flue in East Cobb, where rust flakes and joint separation call for a different set of brushes and a careful check for misalignment. And because so many Marietta homeowners burn pine, we pay close attention to creosote class, not just volume. A thin layer of glazed third-stage creosote is more dangerous than a thick coat of flaky first-stage soot, and it requires mechanical removal, not just brushing.

Level 1 Inspection

Signs you need it

You use the fireplace regularly and haven’t had anyone look at the accessible portions of the flue, damper, and firebox in the past year.

What it costs in Marietta

A Level 1 inspection runs $189 in Marietta when booked as a standalone visit and is included at no charge with any standard cleaning.

How we do it

We inspect the firebox, damper, smoke chamber, and accessible flue from the roof and hearth, document findings with photos, and hand you a written report before leaving.

Level 2 Inspection

Signs you need it

You’re buying or selling a home, the chimney has survived a chimney fire, or you’ve made a change in fuel type or appliance.

What it costs in Marietta

A Level 2 inspection costs about $289 in Marietta when combined with a cleaning, or $399 as a standalone camera-scan visit.

How we do it

We run a camera down the entire flue length, inspect the attic and crawlspace where accessible, check the crown and flashing, and provide a full photo archive of the scan.

Creosote Removal

Signs you need it

You see shiny, tar-like buildup on the flue walls, smell a strong campfire odor even when the fireplace isn’t lit, or the damper feels sticky.

What it costs in Marietta

Creosote removal starts at $189 for light first-stage deposits and runs $275 to $425 for heavy glazed third-stage removal, which may require chemical treatment or mechanical scraping.

How we do it

We identify the creosote class, remove deposits with the appropriate rotary or chemical method for the liner type, and document the before and after with photos.

Annual Sweep

Signs you need it

It’s been more than 12 months since the last cleaning, or you burned pine through the holidays and notice soot falling into the firebox.

What it costs in Marietta

A standard annual sweep runs $189 to $329 in Marietta depending on liner type, creosote load, and whether the chimney is masonry or prefabricated metal.

How we do it

We protect the hearth, sweep the full flue length with liner-appropriate brushes, remove debris from the smoke chamber and firebox, and hand you a written report with photos.

What Chimney Sweep Costs in Marietta

How often should a chimney be cleaned in Marietta?

At least once per burning season, which in Marietta means October or November before the cold snaps hit. If you burn pine or use the fireplace more than a few times a month, re-clean by January. Call (980) 580-8641 to schedule.

Does burning pine really make that much difference?

Yes. Pine’s resin content produces creosote at roughly double the rate of seasoned hardwood, and Marietta’s sudden cold snaps make for low-temperature fires that worsen the effect. We’ll note the creosote type on your report so you can decide on your next cleaning date.

Chimney Repair in Marietta

Chimney Repair in Marietta is driven by water and age. Around Marietta Square, old masonry chimneys have deteriorating mortar crowns and spalling brick from a century of rain and thermal cycling; in East Cobb, metal flue systems corrode and separate at the joints, and flashing failures let water run down the chase. The repair that takes two hours on a 1990s prefab unit can be a full-day repointing and crown rebuild on a 1910 brick chimney, so we price every job in writing after the camera shows us what’s actually happening inside the flue.

Mortar Repointing

Signs you need it

The mortar joints between bricks are crumbling, missing in patches, or you can see daylight through them from inside the attic.

What it costs in Marietta

Repointing in Marietta runs $25 to $45 per square foot depending on access, joint depth, and whether the work is at ground level or requires scaffolding.

How we do it

We rake out failed mortar to a consistent depth, match the original mortar color and composition as closely as possible, and repoint with a weather-appropriate mix.

Flashing Repair

Signs you need it

Water stains appear on the ceiling near the chimney after heavy rain, or the flashing shows rust, lifting, or gaps where it meets the roofline.

What it costs in Marietta

Flashing repair in Marietta costs $350 to $900 depending on the extent of the repair, the roof material, and whether a full replacement is needed.

How we do it

We remove the old flashing, inspect the roof deck beneath for hidden water damage, install new step and counter flashing with proper lap, and document the work with photos.

What Chimney Repair Costs in Marietta

Can a cracked chimney be repaired, or does it need a rebuild?

Most cracks in the flue liner or brick can be repaired without a full rebuild, especially if caught early. We’ll show you the camera footage and give you a written price for the minimum repair that actually fixes the problem. Call (980) 580-8641 for a second opinion on any written quote.

Does repointing fix a leaking chimney?

Repointing fixes water entry through failed mortar joints, but leaking often involves the crown, flashing, or cap too. We inspect all three during any leak call so you fix the actual source, not just one symptom. Estimates are free and in writing.

Chimney Liner & Rebuild in Marietta

Chimney Liner & Rebuild work in Marietta splits by home age. The original clay tile liners in Marietta Square homes have often spalled and cracked after a century of thermal cycling, and those cracks can allow heat and gases into the masonry or living space; the metal flue systems in East Cobb subdivision homes corrode at the joints and need liner replacement or full rebuild. HeatShield, DuraFlex, and Copperfield products cover both scenarios, and we’ll always show you the camera evidence that justifies the work before a single brick is touched.

Stainless Steel Liner

Signs you need it

The existing clay liner has spalled, cracked, or shifted to the point where heat or flue gases can escape into the chimney or home.

What it costs in Marietta

A stainless steel liner in Marietta costs $1,300 to $4,500 depending on the flue height, diameter, and whether we need a full-length or partial liner.

How we do it

We measure the flue, remove the damaged liner, install a properly sized stainless steel liner, insulate where required, and document the full installation with a final camera scan.

Liner Replacement

Signs you need it

The current liner has multiple cracks, separated joints, or rust-through in a metal system, and the camera shows flue gases can escape into the chase.

What it costs in Marietta

Liner replacement in Marietta ranges from $1,300 to $4,500 for most homes, with taller chimneys and larger diameters at the higher end.

How we do it

We pull the old liner, clean the flue interior, install the new liner with proper termination and cap, and run a final camera verification before we call the job done.

What Chimney Liner & Rebuild Costs in Marietta

How do I know I really need a new liner?

The camera scan shows it. We’ll walk you through the footage: cracked clay tiles, separated joints, rust-through in metal. No liner gets replaced in a Marietta home without photo evidence. Call (980) 580-8641 for a written assessment.

Is HeatShield any good, or is a steel liner better?

HeatShield works well for certain clay liner repairs in older Marietta Square homes; stainless steel is the stronger choice for full replacements and metal flues. We’ll recommend whichever suits your chimney and show you why on camera.

Brands We Service in Marietta

We stock and install parts from Copperfield, DuraFlex, and HeatShield, which covers nearly every chimney we encounter in Marietta. Most common parts are on the truck or available within one business day through our local supply network. Our brands page shows the full line.

Pricing for Chimney Cleaning in Marietta, GA

Neighborhoods We Serve in Marietta

Our crews cover Marietta from the historic blocks around Marietta Square through East Cobb and northwest Cobb County. We schedule most cleaning and inspection visits within a few business days, and we keep repair and liner crews routed to minimize your waiting time.

• Marietta Square Historic District
• East Cobb
• Northeast Cobb
• West Cobb / Kennesaw Mountain foothills
• Whitlock Avenue corridor

Service Area - Cities Near Marietta

Beyond Marietta, we serve Kennesaw, GA to the north, Mableton, GA to the south, and Atlanta, GA to the southeast. We also serve Smyrna, TN through our regional network. If you’re just outside Marietta, call (980) 580-8641 and we’ll confirm coverage.

FAQs About Chimney Cleaning in Marietta