Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Kennesaw
Chimney cap and crown work in Kennesaw usually comes down to one of two situations: a rusted chase cover on a 30-year-old prefab fireplace, or a spalling mortar crown on a masonry chimney that’s been soaking up Georgia rain for decades. Both are fixable, and both should be addressed before water finds its way into your firebox or smoke chamber. We’re Emberly Chimney Cleaners, and our Chimney Cap & Crown team works throughout Kennesaw with camera-documented inspections, written pricing before any work starts, and a 365-Day Done Right Promise on every job. Call (980) 580-8641 to schedule.
Why Emberly Chimney Cleaners Is Kennesaw’s Preferred Chimney Cap & Crown Company
We’ve been inspecting and repairing chimneys since 2009, with more than 38,000 documented jobs completed under the Haven Standard. Every visit includes an NFPA 211 Level 2 camera scan - that’s the standard that requires a visual record of the flue interior, not just a flashlight glance from the firebox. Since 2009, we’ve photographed and archived every inspection, a practice that became Clause 4 of the Haven Standard. That archive matters here, because Kennesaw’s housing stock has a particular problem: thousands of subdivision homes built between 1985 and 2005 with factory-built zero-clearance fireplaces that are now reaching the end of their design life.
Homeowners off Barrett Parkway, Bells Ferry Road, and the Old 41 Highway corridor regularly call us for what they think is a simple cap replacement. What our camera often shows is a chase cover that’s rusted through at the seams, letting water run down the flue chase onto the firebox below. We show you that footage before anyone touches a tool. Corrine Halstead, our owner, made that non-negotiable: no recommendation without evidence you can see yourself. Written scope, written price, written warranty - before work begins, not after.
Our Chimney Cap & Crown Services in Kennesaw
Cap Installation
A properly fitted cap keeps rain, leaves, and animals out of your flue. In Kennesaw, where wet winters drive squirrels and birds into uncapped chimneys, a cap with the right mesh sizing does more than keep debris out - it prevents nesting that can block draft and push carbon monoxide back into living spaces. We stock stainless multi-flue caps sized for the wide chase openings common on 1990s prefab units in neighborhoods near Kennesaw State University, and we fabricate custom caps when the chase dimensions don’t match standard sizes.
Cap Replacement
Cap replacement in Kennesaw usually isn’t a swap-out of a shiny lid. It’s the moment we find out whether the chase cover beneath is still sound. On factory-built systems - which dominate subdivisions along Barrett Parkway and Bells Ferry Road - the original sheet-metal chase covers are now 30 to 40 years old and rusting from the inside out. We replace both the cap and the underlying cover when needed, and we’ll show you the corrosion on camera before we recommend spending a dollar. A typical chase cover and cap replacement in Kennesaw runs $380 to $750, depending on chase dimensions and whether custom fabrication is required.
Crown Repair
Masonry crowns - the concrete or mortar slab that caps a true masonry chimney - fail differently in Kennesaw than they do in south Georgia. The city sits near Kennesaw Mountain at roughly 1,800 feet of elevation, high enough that winter nights dip below freezing often enough to create genuine freeze-thaw cycles. Water seeps into hairline cracks, freezes, expands, and spalls the crown surface season after season. Crown repair in Kennesaw typically runs $250 to $600 for crack sealing and resurfacing, and $800 to $1,500 when the crown has spalled enough to require reforming. We use moisture-resistant crown coat systems, not a bag of mortar mix smeared over the cracks.
Crown Coating
On crowns that are still structurally intact but showing early crack patterns, we apply a flexible elastomeric crown coat that moves with the masonry instead of cracking apart like a rigid cement patch. This is the right call for many of the older clay-tile flue chimneys in Kennesaw’s established neighborhoods, where the crown hasn’t failed yet but is clearly taking on water. Expect $300 to $550 for a full crown coating, including crack preparation and sealing. Corrine’s position is straightforward: if the camera doesn’t show structural damage, we don’t sell you a rebuild.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Kennesaw
Most Kennesaw homeowners don’t know what brand of cap or chase cover sits on their chimney until we’re on the roof with a camera. When we are, we’re working with materials from Copperfield, Famco, and HeatShield because they hold up to the specific failure modes we see here: moisture-driven rust, animal intrusion, and flue liner degradation behind aging prefab fireplaces. We keep common multi-flue cap sizes and chase cover dimensions in local inventory for faster turnaround across Kennesaw, so a replacement doesn’t have to wait on a distributor shipment from three states away.
Common Chimney Cap & Crown Problems We See in Kennesaw Homes
- Rusted-through chase covers on 1980s and 1990s prefab fireplaces. Original sheet-metal covers along Barrett Parkway and Bells Ferry Road subdivisions are failing at the seams after three decades of Georgia humidity and rain. Water runs down the chase and soaks the firebox - often misdiagnosed as a simple cap issue.
- Spalling crowns on true masonry chimneys. Kennesaw’s elevation near Kennesaw Mountain means more freeze-thaw cycles than Atlanta proper. Crown surfaces crack, flake, and let water into the smoke chamber, which a routine sweep never catches.
- Animal nesting in uncapped flues during wet winters. Squirrels and birds move into open chimneys from November through March. Nests block draft and can force carbon monoxide back into the home, especially when creosote has already glazed on the liner.
- Caps on the wrong pitch or with damaged screens causing draft restriction. On two-story colonials and craftsman-style homes common in Kennesaw subdivisions, poorly sized caps or clogged mesh reduce airflow enough that smoke backs up into the living room on cold nights.
Pricing for Chimney Cap & Crown in Kennesaw, GA
Here’s what we quote, in writing, before any work begins on a Kennesaw chimney:
- Chase cover and cap replacement (prefab systems): $380 - $750
- Custom stainless multi-flue cap fabrication and install: $450 - $900
- Crown crack sealing and resurfacing: $250 - $600
- Full crown reform and rebuild (masonry chimneys): $800 - $1,500
- Crown coating with elastomeric sealant: $300 - $550
What moves the price within those ranges is chase dimension, roofline access, and whether we need to custom-fabricate a cover because the original was an odd size. We never recommend work without camera evidence, and we’ll tell you plainly when a repair can wait. Every estimate is free, and we’ll give you a written scope and written warranty before you commit. Call (980) 580-8641 to book.
We Also Serve Cities Near Kennesaw
Our crews work throughout north metro Atlanta, including Kennesaw and the surrounding communities. If you’re in Acworth, Marietta, Woodstock, or Smyrna, you’re in our service area - same camera-scan standard, same written-before-work pricing, same 365-Day Done Right Promise. Dispatch and scheduling run out of our Atlanta office, but the crews on your roof are local to this corridor and know these subdivisions.
Serving Kennesaw, GA - Our Local Coverage Area
We’re based in the Kennesaw area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Kennesaw
Most of those homes have factory-built zero-clearance fireplaces with thin-gauge sheet-metal chase covers installed as original equipment. That cover wasn’t designed to outlast the fireplace itself, and at the 25-to-35-year mark it rusts through at the seams or around the fasteners. A rusted cover lets water pour down the chase and onto the firebox, which is why a “cap failure” on these homes often turns out to be a full chase cover replacement. The camera tells us which one it is. Call (980) 580-8641 for an inspection with photo documentation included.
Yes, and this is exactly the situation we see most often in Kennesaw’s older subdivisions. Even an unused chimney takes on water through a failing crown or rusted chase cover, and that water doesn’t stay in the flue - it migrates into the framing, the firebox, and eventually the ceiling below. An unused fireplace also tends to collect more animal nesting because there’s no heat or smoke to deter them. A crown inspection with a camera scan costs you an hour and gives you a documented answer. If the crown is sound, we’ll tell you that too, and you won’t hear from us until you call again.
From the ground, no, and we won’t pretend otherwise. Spalling - surface flaking from freeze-thaw cycles - develops in hairline cracks that aren’t visible from the yard. What we can tell you is that Kennesaw’s elevation near Kennesaw Mountain produces real freeze-thaw stress, and if your home is one of the older masonry chimneys in the area with a clay-tile flue, the odds of crown cracking are high. Our inspection includes a camera scan and photo record, and if the crown is fine, you’ve got a documented baseline and no further recommendation from us. Estimates are free; call (980) 580-8641.
They do. Prefab systems use chase covers - the flat metal top that seals the chase - and the cap sits on top of that. Masonry chimneys use a crown, which is a poured concrete or mortar slab, and the cap mounts directly to the flue tile. Different mounting, different water management, different failure modes. In the Old 41 Highway subdivisions where original prefab fireboxes are now 30 or more years old, we’re often replacing the chase cover alongside the cap, something a masonry chimney wouldn’t need. If you don’t know which system you have, the camera will tell us in the first ten minutes.
No, and any company that tells you otherwise is selling a cap, not a solution. Third-degree creosote is hardened, tar-like glaze bonded to the liner - it restricts draft regardless of how the system is capped. A new cap keeps water and animals out, but it doesn’t remove glaze or restore airflow. Our process is to document the creosote class on camera, then discuss whether the liner needs mechanical removal, a resurfacing treatment, or replacement. We source liner materials from HeatShield and DuraFlex, and we’ll show you the before and after footage. Call (980) 580-8641 for a camera-documented evaluation.
Get Your Chimney Cap and Crown Inspected in Kennesaw
On a 1990s two-story off Bells Ferry Road, our tech found a rusted-through chase cover letting water run down the flue chase and onto the firebox below. We pulled the old cover, showed the homeowner the corroded panel, and installed a custom stainless multi-flue cap over a HeatShield-resurfaced flue liner - sealing the system before the next rain. That’s the standard we bring to every Kennesaw roof: show you the evidence, price it in writing, and stand behind the work for a full year under the Haven Standard’s 365-Day Done Right Promise. Estimates are free. Call (980) 580-8641 to schedule your inspection.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Kennesaw and north metro Atlanta.
Chimney Cap & Crown in Nearby Areas