Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Snellville, GA
Chimney cleaning in Snellville, GA typically costs $169-$289 for a standard sweep, and most homes here need an inspection-first approach rather than just a brushing. The reason is simple: Snellville’s housing stock is dominated by prefabricated zero-clearance fireplaces installed during Gwinnett County’s 1975-1995 building surge, and those units are now 30-50 years old. When we clean a chimney in Snellville, we’re usually documenting whether an aging factory-built system is still safe to burn at all. Call (980) 580-8641 for a written quote before any work starts.
Why Snellville Homes Are Different
Snellville sits at the heart of Gwinnett County’s suburban expansion, and the homes tell that story in their fireplaces. Production builders working the US-78 corridor and GA-124 subdivisions standardized on factory-built zero-clearance metal fireplaces rather than traditional masonry, installing the same two or three models by the hundreds. A tech who knows those specific units can often identify the common panel crack patterns, discontinued replacement parts, and matching cap sizes before pulling a ladder off the truck.
The climate compounds the age problem. Snellville’s mild humid-subtropical winters mean most homeowners burn only 15-25 fires per season, often at low heat. That burn pattern deposits stage-two glazed creosote rather than burning the flue clean, which means a chimney that looks lightly used can still carry a serious fire load. Georgia’s chimney swift population, federally protected under the Migratory Bird Treaty Act, occupies uncapped chimneys from roughly April through October, which makes autumn the mandatory cleaning window and gives every visit a hard case for stainless caps.
What this means in practice: most cleaning jobs in Snellville are realistically inspection-first replacement assessments. Homes have changed hands two or three times with no maintenance records, and “just a sweep” often turns into a camera-documented conversation about liner condition, firebox panel deterioration, and chase cover integrity.
Our Main Snellville Services
Two services account for the majority of calls we take from Snellville homeowners: fireplace work and cap-and-crown protection. Both tie directly to the aging prefab systems and chimney swift pressure described above.
Fireplace Services in Snellville
Factory-built fireplaces in Snellville subdivisions off Scenic Highway and the Lenora Road corridor share common failure modes: cracked refractory panels, warped firebox liners, and doors that no longer seal. Fireplace Services in Snellville cover diagnosis, repair, and replacement of those components, with written pricing and a photo record before you decide anything. Most of these units have hit or passed their 20-30 year rated service life, so we treat every fireplace call as a condition assessment first.

Chimney Cap & Crown in Snellville
Chimney swifts nest in uncapped flues from spring through early fall, and Snellville’s aging prefab systems often have missing or corroded chase covers that let water straight into the firebox. Chimney Cap & Crown in Snellville addresses both: properly sized stainless caps sized to the specific prefab models common in local tract subdivisions, and crown or chase cover repair that stops water intrusion before it becomes a liner problem.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cleaning & Sweep in Snellville

Chimney cleaning in Snellville starts with a camera scan, because most of the fireplaces here are 30-50 year old factory-built units that have never been documented. We treat every Chimney Cleaning & Sweep job as a chance to establish a baseline record: what the flue looks like today, what the creosote class is, and whether the system can safely go another season. That record belongs to you, in writing, with photos, before anyone quotes a repair.
Level 1 Inspection
Signs you need it
You burn fires regularly and want the basic annual check that the flue is clear and unobstructed.
What it costs in Snellville
A Level 1 inspection runs $99-$199, often bundled with a cleaning.
How we do it
We examine the accessible portions of the fireplace, flue, and chimney exterior, then document findings with photos and a written report.
Level 2 Inspection
Signs you need it
You just bought the home, changed fuel type, or had a chimney fire or storm event.
What it costs in Snellville
A Level 2 inspection in Snellville costs $199-$399 and includes a full camera scan of the flue interior.
How we do it
We run a camera down the full flue length, document every joint and transition, and give you a written condition report with photos.
Creosote Removal
Signs you need it
You see dark, shiny or crusty buildup on the flue walls or notice a strong smoky odor in the room.
What it costs in Snellville
Creosote removal runs $169-$289 for standard buildup, more if it has hardened into stage-three glaze.
How we do it
We run rotary brushes and specialized rods to break the creosote free, then vacuum it out and document the result.
Soot Removal
Signs you need it
You burn wood and see fine black dust accumulating in the firebox or around the hearth.
What it costs in Snellville
Soot removal is typically $169-$249, often folded into an annual sweep.
How we do it
We brush the flue from top and bottom, remove the soot from the smoke chamber and firebox, and clean the damper assembly.
What Chimney Cleaning & Sweep Costs in Snellville
| Item | Typical range in Snellville |
|---|---|
| Standard sweep (Level 1 + cleaning) | $169-$289 |
| Creosote removal (heavy/stage two) | $250-$450 |
| Level 2 camera inspection | $199-$399 |
How often should a chimney be swept in Snellville?
Annually, even with light use, because low-heat burns common in Snellville deposit glazed creosote faster than hot fires. A camera scan each year builds the maintenance record these aging prefab systems lack.
Do prefab fireplaces need the same cleaning as masonry?
Yes, and they often need more careful inspection because the firebox panels and flue pipe are replaceable components with a 20-30 year service life. Most Snellville prefab units are past that mark, so proof of a camera scan matters more than a brushing.
Chimney Repair in Snellville

Chimney repair in Snellville usually means addressing water damage and spalling on masonry, plus failing components on aging prefab systems. The dominant housing stock, built from the late 1970s through mid-1990s, has reached the age where mortar joints fail, flashing separates, and firebox panels crack. We document every repair with before and after photos, and we never recommend work the camera doesn’t support. See our Chimney Repair hub for the full scope.
Mortar Repointing
Signs you need it
You see crumbling or missing mortar between bricks, or the chimney looks weathered and loose at the joints.
What it costs in Snellville
Repointing runs $400-$1,200 depending on the affected area and access difficulty.
How we do it
We grind out the failing mortar, pack in new mortar matched to the existing, and document the finished joints.
Flashing Repair
Signs you need it
Water stains appear on the ceiling near the chimney after rain, or the flashing is visibly lifted or corroded.
What it costs in Snellville
Flashing repair in Snellville costs $350-$800, depending on whether the roof penetration is simple or multi-sided.
How we do it
We remove the old flashing, install new metal with proper overlap and sealant, and verify the seal with a water test.
What Chimney Repair Costs in Snellville
| Item | Typical range in Snellville |
|---|---|
| Mortar repointing (partial) | $400-$1,200 |
| Flashing repair | $350-$800 |
| Chimney waterproofing | $250-$500 |
Can I skip repointing for a season?
Sometimes, but not if water is actively entering. Loose mortar accelerates freeze-thaw spalling, and Snellville’s humid winters keep brick damp, so delay turns a $600 repointing job into a $3,000 rebuild.
Does chimney repair require a permit in Snellville?
Most repair work like repointing or flashing does not, but full rebuilds may. We can confirm Gwinnett County requirements for your specific job and handle the documentation if needed.
Chimney Liner & Rebuild in Snellville

Chimney liner and rebuild work in Snellville mostly involves replacing liners in masonry chimneys and full-system replacement on failed prefab units. The 1975-1995 tract-home stock has hit the window where factory-built fireplaces and their flue pipes are past rated service life, and masonry chimneys show spalling and liner cracks from decades of humid exposure. We only recommend liner work after a camera scan shows the damage, and you keep every photo. The Chimney Liner & Rebuild hub covers options.
Stainless Steel Liner
Signs you need it
Your camera scan shows cracked clay tiles, missing mortar between tiles, or a liner that can no longer contain flue gases.
What it costs in Snellville
Stainless liner installation runs $1,500-$3,500 depending on flue length and access.
How we do it
We measure the flue, pull a continuous stainless liner down through the chimney, insulate as needed, and connect it to the appliance.
Full Chimney Rebuild
Signs you need it
The chimney is leaning, bricks are spalled all the way through, or the crown and upper courses have separated from the structure.
What it costs in Snellville
A full rebuild in Snellville costs $3,500-$8,000, more if significant scaffolding or structural repair is involved.
How we do it
We tear down to solid structure, rebuild with new brick and crown, and document every course with photos and a written warranty.
What Chimney Liner & Rebuild Costs in Snellville
| Item | Typical range in Snellville |
|---|---|
| Stainless steel liner | $1,500-$3,500 |
| Flexible liner (prefab retrofit) | $1,200-$2,800 |
| Full chimney rebuild | $3,500-$8,000 |
How long does a stainless liner last?
Twenty to thirty years is typical, longer with proper maintenance. In Snellville, a liner protects against both flue gas leakage and water intrusion, so the camera record at install becomes your baseline for future inspections.
Do I need a liner for a prefab fireplace?
Prefab systems use their own listed flue pipe, not a masonry liner, but when that pipe fails the fix is usually full system replacement. A Level 2 camera inspection tells you which path applies to your unit.
Brands We Service in Snellville

We work with the brands common to Gwinnett County tract homes, including Famco, Copperfield, and Olympia Chimney components, plus DuraFlex and HeatShield materials for liner and repair work. Parts for the prefab models repeated across Snellville subdivisions are stocked locally or sourced quickly through our supplier network. See our brands page for the full list.
Pricing for Chimney Cleaning in Snellville, GA
| Service | Typical range in Snellville |
|---|---|
| Standard chimney sweep | $169-$289 |
| Level 1 inspection | $99-$199 |
| Level 2 camera inspection | $199-$399 |
| Creosote removal (heavy) | $250-$450 |
| Soot removal | $169-$249 |
| Mortar repointing | $400-$1,200 |
| Flashing repair | $350-$800 |
| Chimney waterproofing | $250-$500 |
| Stainless steel liner | $1,500-$3,500 |
| Full chimney rebuild | $3,500-$8,000 |
Prices in Snellville push higher when access is difficult: steep roof pitches on two-story tract homes, chases that require lift equipment, or heavy stage-three creosote that needs chemical treatment. Every quote is written and delivered before work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Snellville

We work across Snellville and the surrounding Gwinnett County subdivisions, including the developments clustered off US-78 and the Scenic Highway corridor. Response time across the area is typically one to three business days, with flexibility during the autumn pre-burn-season rush.
- Scenic Highway corridor subdivisions
- Lenora Road / Centerville area
- Briscoe Field / Pharrs Road area
- Five Forks / Trickum area
- Snellville proper, near City Hall and South Gwinnett
Service Area - Cities Near Snellville
Our crews also cover neighboring Gwinnett and DeKalb communities. If you’re just outside Snellville, we serve Redan, GA, Lawrenceville, GA, Tucker, GA, and Duluth, GA. Dispatch and scheduling are coordinated from the brand’s Atlanta office, and crews serve Snellville locally.
Serving Snellville, GA - Our Local Coverage Area

We’re based in the Snellville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Snellville
Most Snellville appointments are scheduled within one to three business days, though autumn fills quickly as chimney swifts leave and burning season approaches. Call early in the fall to secure a slot before the rush, or book a summer appointment when availability is easier.
Yes. Snellville’s low-heat, infrequent burn pattern produces glazed creosote that a hot fire never burns away, so even 15 fires per season can leave a dangerous deposit. An annual sweep with a camera scan also builds the maintenance record these aging prefab homes lack.
Many Gwinnett County subdivisions require caps for chimney swift prevention and uniformity, though specifics vary by HOA. We size and install stainless caps that match the factory-built units common to Snellville tract homes, and can provide the documentation your HOA may request.
Call (980) 580-8641 for a written quote. We serve Snellville with upfront pricing, camera-documented inspections, and a written warranty on every job. No work starts until you approve the price in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Snellville Customers Say
"Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F.





Before
After
Before
After