Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Redan, GA
Chimney cleaning in Redan usually costs between $169 and $289 for a standard sweep with a Level 1 inspection. Most Redan homes have prefabricated metal fireplaces built in the 1970s through early 1990s that haven’t been serviced in years, which means the job here often involves more than just brushing out soot – it means documenting rust, deteriorated panels, and glazed creosote that a simple sweep won’t fix. Call (980) 580-8641 and we’ll give you a written price before any work starts.
Why Redan Homes Are Different
Redan’s tract neighborhoods were built out during DeKalb County’s eastward expansion from the 1970s through early 1990s. That leaves a dense concentration of factory-built fireplace systems now 30 to 50 years old, well past their typical 20 to 30 year service life. Most of these are single-story ranch and split-level homes finished with prefabricated metal units from brands like Heatilator or Majestic, not full masonry chimneys. Those UL-listed components – firebox panels, dampers, chase covers – are long out of warranty and approaching failure. We see it on nearly every inspection.
The humid subtropical climate compounds the problem. Chimneys here sit sealed up in heat and humidity for most of the year, which accelerates rust on metal chase covers and firebox interiors. When residents do burn, they’re often using local loblolly pine and sweet gum – resiny wood that produces heavy creosote deposits in flues that don’t get hot enough to burn it off. The result is a combination of aged metal components and thick, glazed creosote that we encounter more consistently in Redan than in harder-winter Atlanta suburbs where fireplaces cycle regularly. To make matters worse, chimney swifts – a federally protected migratory bird – nest in uncapped flues here every spring, and once eggs are present, work must legally pause for six to eight weeks.
Our Main Redan Services
Beyond the core sweep, Redan homeowners call us most about two things: fixing what the camera finds inside the firebox, and dealing with what’s happening on top of the chase. Here’s what each involves locally.
Fireplace Services in Redan
When we pull the camera back up on a Redan fireplace, we’re usually looking at rusted firebox panels and a damper that hasn’t moved in a decade. Because these 30 to 50 year old prefab units were never designed to run this long without component replacement, Fireplace Services in Redan covers panel replacement, damper repair, and gas log line checks, with a written scope and photo record on every visit.
Chimney Cap & Crown in Redan
Uncapped metal chase tops rust through in Redan’s humidity, and once water gets in, it takes the firebox and flue with it. Chimney Cap & Crown in Redan means replacing rusted chase covers, installing caps with proper screening to keep chimney swifts out before their April nesting season, and sealing masonry crowns against moss and algae growth that thrives in the damp climate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cleaning & Sweep in Redan
Chimney cleaning in Redan typically runs $169 to $289 for a standard sweep with a Level 1 inspection, and most jobs are completed the same day. Because most Redan chimneys serve 30 to 50 year old prefabricated fireplaces that sit unused through Georgia’s humid summers, what we pull out is rarely simple soot – it’s usually a mix of rust scale from deteriorating firebox panels and glazed, tar-like creosote from occasional low-heat burns of local pine and sweet gum. Every sweep we do starts with a camera-scan inspection under NFPA 211 Level 2, so you see exactly what we see before a brush ever touches the flue. That’s the standard we built our company on, and it’s what you’ll find described on our Chimney Cleaning & Sweep service page.
Level 1 Inspection
Signs you need it
You burn occasionally and haven’t had the flue looked at in over a year.
What it costs in Redan
A Level 1 inspection bundled with a sweep runs $169 to $289 in Redan.
How we do it
We check the accessible portions of the flue, firebox, damper, and chase top visually, then document findings with photos you keep.
Level 2 Inspection
Signs you need it
You bought a Redan home built between 1975 and 1995 and have no prior chimney records.
What it costs in Redan
A standalone Level 2 inspection with camera scan runs $250 to $400 in Redan.
How we do it
We run a camera down the full flue length and through the smoke chamber to document liner condition, clearances, and any hidden damage.
Creosote Removal
Signs you need it
You smell a sharp, campfire-like odor near the fireplace even when it’s not burning.
What it costs in Redan
Glazed or Stage 3 creosote removal runs $350 to $800 in Redan depending on flue length and buildup severity.
How we do it
We apply a chemical treatment to break down the hardened glaze, then use rotary tools to mechanically remove it and a camera to confirm clearance.
Soot Removal
Signs you need it
Black dust collects on the mantel or firebox walls after a few fires.
What it costs in Redan
Standard soot removal as part of a sweep runs $169 to $289 in Redan.
How we do it
We brush the flue, vacuum the firebox and smoke shelf, and run a final camera pass to confirm clean metal.
What Chimney Cleaning & Sweep Costs in Redan
| Item | Typical range in Redan |
|---|---|
| Standard sweep with Level 1 inspection | $169 - $289 |
| Level 2 inspection with camera scan | $250 - $400 |
| Glazed creosote removal | $350 - $800 |
How often should a chimney be swept in Redan?
Once a year if you burn at all, even occasionally. Redan’s humid summers mean whatever creosote formed last winter sits and hardens all year, which makes the next cleaning harder and the chimney riskier to burn until it’s done.
Is creosote really more dangerous in prefab fireplaces?
Yes. Prefabricated metal flues have tighter clearances than masonry, and glazed creosote insulates heat that can degrade the thin metal liner faster. In older Redan units already past service life, that combination accelerates failure. Call (980) 580-8641 to schedule a camera check.
Chimney Repair in Redan
Chimney repair in Redan typically runs $300 to $1,200 for common fixes like mortar repointing and flashing work, and higher for structural rebuilding. The housing era is the story here: 1970s through early 1990s tract construction means prefabricated metal units with rusted components and deteriorated chase tops that have been absorbing humidity for decades. What we find in Redan more than most suburbs is rust, not just wear. That’s the pattern described in detail on our Chimney Repair service page, and it’s why we never recommend a repair without camera evidence showing exactly what’s failed.
Mortar Repointing
Signs you need it
The mortar joints on your masonry chimney are crumbling, eroding, or you can scrape them out with a key.
What it costs in Redan
Mortar repointing in Redan ranges $300 to $800 depending on chimney height and joint condition.
How we do it
We grind out the deteriorated joints to proper depth, pack in fresh mortar matched to your existing color, and tool it flush for water resistance.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, chipping, or leaving red dust and chips at the chimney base.
What it costs in Redan
Spalling brick repair in Redan ranges $400 to $1,600 depending on the number of affected bricks and access difficulty.
How we do it
We remove the damaged brick, match it with new material, and reset it with proper mortar so water stops getting behind the face.
Chimney Waterproofing
Signs you need it
You see a dark, damp ring inside the firebox after rain or notice moss and algae growth on the exterior.
What it costs in Redan
Chimney waterproofing in Redan runs $250 to $600 for a standard single-flue residential chimney.
How we do it
We clean the masonry surface, then apply a vapor-permeable water repellent that lets the brick breathe while blocking rain absorption.
Flashing Repair
Signs you need it
Water stains appear on ceilings or walls near the chimney after heavy DeKalb County rain.
What it costs in Redan
Flashing repair in Redan ranges $300 to $900 depending on roof pitch and whether the existing flashing can be resealed or needs replacement.
How we do it
We inspect the roof-to-chimney junction, seal or replace degraded flashing, and re-anchor it before water gains a path into the chase.
What Chimney Repair Costs in Redan
| Item | Typical range in Redan |
|---|---|
| Mortar repointing | $300 - $800 |
| Spalling brick repair | $400 - $1,600 |
| Flashing repair | $300 - $900 |
Do Redan homes need more repair than newer metro Atlanta builds?
Yes, and it’s predictable. Redan’s housing stock is older and dominated by prefab metal systems that are past service life. Rusted firebox panels and deteriorated chase covers are the norm, not the exception. Call (980) 580-8641 to get a written price.
Can a rusted prefab firebox be repaired, or does it need replacing?
That depends on where the rust is and whether the panels are structural or cosmetic. We show you camera footage before recommending anything, and Clause 4 of the Haven Standard means you keep the photo record regardless of what you decide.
Chimney Liner & Rebuild in Redan
Chimney liner replacement in Redan runs $2,500 to $6,500 for a typical single-flue prefabricated or masonry chimney, while a full rebuild can start at $8,000 and climb depending on what’s structurally compromised. The persistent issue here is that Redan’s 1970s through early 1990s factory-built systems were never designed to be relined – they use thin metal flues that rust from the inside out in Georgia’s humidity. We outline the full scope of what that means on our Chimney Liner & Rebuild service page. The short version: if the camera shows holes, separation, or thin-walled metal, the liner is the safety device, not an accessory.
Stainless Steel Liner
Signs you need it
Your masonry flue has cracked clay tiles, loose mortar, or you’re converting to a gas or wood stove insert.
What it costs in Redan
A stainless steel liner installation in Redan runs $2,500 to $6,500 depending on flue length and diameter.
How we do it
We measure the flue, size the correct DuraFlex liner, lower it into place, insulate as needed, and secure the connections top and bottom.
Flexible Liner
Signs you need it
Your flue has slight offsets or a difficult path that would make rigid pipe impossible without opening the masonry.
What it costs in Redan
Flexible liner installation in Redan ranges $2,500 to $6,500 including the connector and top plate.
How we do it
We run a flexible stainless tube down the existing flue path, terminate it with a proper top plate and cap, and document the entire run on camera.
Liner Replacement
Signs you need it
The camera shows flaking metal, pinholes, or separation between liner sections in your prefab chimney.
What it costs in Redan
Liner replacement in an existing prefab fireplace in Redan runs $2,500 to $6,500.
How we do it
We extract the failed liner, inspect the chase for water damage, install the new liner to UL spec, and photograph the finished run.
Partial Rebuild
Signs you need it
The upper portion of your masonry chimney is visibly leaning, or the top 20 courses of brick are spalling and loose.
What it costs in Redan
A partial rebuild from the roofline up in Redan starts around $4,000 and runs $8,000 or more depending on access and height.
How we do it
We tear down the compromised section, rebuild it with new brick and mortar to code, install a proper crown, and cap it against swifts and rain.
What Chimney Liner & Rebuild Costs in Redan
| Item | Typical range in Redan |
|---|---|
| Stainless steel liner | $2,500 - $6,500 |
| Flexible liner | $2,500 - $6,500 |
| Partial chimney rebuild | $4,000 - $8,000+ |
Do I really need a new liner if my fireplace still works?
If the camera shows holes, separation, or rust-through, yes. A compromised liner lets heat and gases reach combustible framing, and in Redan’s prefab systems that thin metal is often the only barrier. We’ll show you the footage before you spend a dollar.
How long does a liner replacement take in Redan?
Most liner jobs are done in one day. If we find chase damage or water penetration from a rusted chase cover, we’ll document it, quote the additional scope in writing, and you decide before anything else happens. Call (980) 580-8641 for a free estimate.
Brands We Service in Redan
We work on everything we see in Redan’s tract homes: Heatilator, Majestic, Temco, and Marco prefab units from the 1970s through early 1990s, plus masonry systems. We stock common replacement panels and dampers for those brands locally, and source liners and caps from Famco and Copperfield through our supplier network. For a full list, see our brands. Most parts arrive within days, not weeks, because we know what Redan’s housing stock actually uses.
Pricing for Chimney Cleaning in Redan, GA
| Service | Typical range in Redan |
|---|---|
| Standard chimney sweep with Level 1 inspection | $169 - $289 |
| Level 2 inspection with camera scan | $250 - $400 |
| Glazed creosote removal | $350 - $800 |
| Mortar repointing | $300 - $800 |
| Spalling brick repair | $400 - $1,600 |
| Chimney waterproofing | $250 - $600 |
| Flashing repair | $300 - $900 |
| Stainless steel liner | $2,500 - $6,500 |
| Partial chimney rebuild | $4,000 - $8,000+ |
What pushes prices up in Redan specifically is the age of the prefab components: rusted chase covers, warped dampers, and fireboxes that have spent decades absorbing humidity. That’s why the written price matters – we scope the job after the camera scan, not before, so you’re never surprised by a number. Clause 1 of the Haven Standard requires a written price, written scope, and written warranty before any work starts.
Neighborhoods We Serve in Redan
We work throughout Redan and the surrounding DeKalb County communities. Because our scheduling is coordinated from the Atlanta office and crews serve Redan directly, we can typically get to most neighborhoods within one to three business days.
- Redan Valley
- Redan Estates
- Mainstreet at Redan
- Redan Hills
- Panola Valley
Service Area – Cities Near Redan
We also serve homeowners in neighboring communities across DeKalb and Gwinnett counties. If you’re in Snellville, GA, Tucker, GA, Decatur, GA, or Lawrenceville, GA, the same written-price-before-work standard applies, and we’ll schedule your sweep or inspection with the same camera documentation.
Serving Redan, GA - Our Local Coverage Area
We’re based in the Redan area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Redan
Most Redan appointments are scheduled within one to three business days. If you’re calling before chimney swift season in early spring, book cap installation early since federal law prohibits disturbing active nests once birds arrive. Call (980) 580-8641 and we’ll schedule you.
Some Redan subdivisions with active homeowner associations require approval for exterior changes like chase covers or visible caps. We’ll provide the written scope and photo documentation you need to submit, and we never start exterior work without confirming any HOA requirements with you first.
The pattern is consistent: rusted chase covers let water into the chase, which rusts the firebox panels, which degrades the flue, and the first sign is usually a smell or water stain. By then the repair cost is higher than a sweep and inspection would have been years earlier. A camera scan shows you exactly where you stand – call (980) 580-8641 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redan Customers Say
"Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F.