Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Reedley, CA
Chimney cleaning in Reedley costs between $189 and $329 for a standard sweep with a Level 1 inspection, and most homes need it every year because of how we burn here. Reedley sits under the San Joaquin Valley Air Pollution Control District’s wood-burning curtailment rules, which means legal burn windows are limited, so when residents can burn, they burn hard with dense orchard prunings from the surrounding fruit belt. That combination produces a heavy, tar-like creosote that sweeps faster and clings harder than what you’d see in coastal towns. Call (980) 580-8641 and we’ll give you a written price before any work starts.
Why Reedley Homes Are Different
Reedley’s older neighborhoods near downtown hold a lot of homes from the 1910s through the 1950s, and many of those still have their original brick masonry chimneys with clay-tile flue liners. Those liners are now 70 to 110 years old, and the mortar joints between them have been through decades of Tule fog winters and 105-degree summers. That thermal cycling opens hairline cracks where creosote can lodge and where moisture gets in, which is why a cleaning here should never be just a brushing. It has to include a camera look at the liner itself.
The Tule fog deserves its own mention. It settles into Reedley during exactly the months people are using their fireplaces, and that persistent damp works its way into chimney crowns and mortar joints. Then summer’s heat expands everything and the cracks widen a little more. By the time you call for a cleaning, what looks like a straightforward sweep often reveals spalling brick or a crown that’s quietly failing. We check for that on every visit because skipping it would mean cleaning a chimney that leaks again next winter.
Our Main Reedley Services
Most Reedley homeowners call us first about the fireplace itself or the cap and crown that protect the top of the chimney. These two jobs are the ones we route to their own detailed pages because they come with enough local nuance to justify it.
Fireplace Services in Reedley
A fireplace in Reedley gets used harder in short bursts than almost anywhere else in California, thanks to the burn windows imposed by the air district. That means gas logs, dampers, and fireboxes wear faster than you’d expect. We inspect the full firebox, damper assembly, and refractory panels, then document what we find in photos. If you’re dealing with a fireplace that smokes back into the room or a damper that won’t seal, start with Fireplace Services in Reedley and we’ll walk you through what’s actually going on.

Chimney Cap & Crown in Reedley
The crown is the concrete slab at the top of your chimney, and in Reedley it’s the first thing the Tule fog attacks. A cracked crown lets water into the brick below, and after a few fog seasons you have spalling faces and rusted dampers. The cap keeps rain out of the flue itself and keeps birds and embers where they belong. We replace crowns, install or repair caps, and seal the whole assembly so the next fog season doesn’t undo this year’s work. Details are on Chimney Cap & Crown in Reedley.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Sweep in Reedley

Chimney sweep in Reedley is not a once-in-a-while job. The air district’s curtailment rules compress burning into short legal windows, and a lot of what gets burned is free peach, nectarine, plum, and almond prunings from local packing operations. Stone-fruit and almond wood burns dense and produces a creosote that’s chemically different from pine or oak creosote: it’s stickier, harder to brush out, and it builds up faster than most homeowners expect. We find Class III creosote, the shiny, tar-like kind that’s a legitimate fire hazard, in chimneys that were cleaned just one season ago. A Chimney Sweep here means removing that specific accumulation and then showing you photos of the flue before and after so you can see exactly what was in there.
Level 1 Inspection
Signs you need it
You burn regularly in a home with a fireplace or wood stove that hasn’t changed since it was built.
What it costs in Reedley
A Level 1 inspection in Reedley runs between $89 and $149 as part of a standard cleaning visit.
How we do it
We check the accessible portions of the chimney, flue, and appliance, verify clearances, and document the basic condition with photos.
Level 2 Inspection
Signs you need it
You’ve had a chimney fire, a seismic event, a weather event, or you’re buying or selling a home with a fireplace.
What it costs in Reedley
A Level 2 inspection in Reedley typically costs between $199 and $349, and it includes the camera scan we run as standard.
How we do it
We run a camera down the entire flue, inspect the attic and crawl spaces, and give you a written report with photos of everything we found.
Creosote Removal
Signs you need it
You see shiny, tar-like buildup on your damper or firebox walls, or you’ve burned a lot of orchard wood this season.
What it costs in Reedley
Creosote removal in Reedley ranges from $189 to $329 when done as part of a full sweep, and occasionally requires a chemical pre-treatment on top of that.
How we do it
We apply a creosote conditioner when the buildup is too dense to brush, then use rotary brushes and hand tools to remove it completely.
Soot Removal
Signs you need it
You have a gas fireplace or insert that’s leaving black residue on the glass or firebox.
What it costs in Reedley
Soot removal in Reedley costs between $189 and $329, depending on whether it’s a wood or gas system.
How we do it
We run brushes sized to your flue, remove the soot from the smoke chamber and firebox, and clean the damper assembly.
Annual Sweep
Signs you need it
It’s been more than 12 months since your last cleaning, or you notice a campfire smell even when the fireplace is cold.
What it costs in Reedley
An annual sweep in Reedley falls between $189 and $329 and includes the standard inspection.
How we do it
We lay drop cloths, run a HEPA-filtered vacuum, brush the full flue, and hand you photos plus a written condition report when we’re done.
What Chimney Sweep Costs in Reedley
| Item | Typical range in Reedley |
|---|---|
| Standard chimney sweep (with Level 1 inspection) | $189 - $329 |
| Level 2 inspection (camera scan) | $199 - $349 |
| Creosote removal (heavy orchard-wood buildup) | $189 - $329+ (chemical pre-treatment may add) |
How often should I get my chimney cleaned in Reedley?
Every year, especially if you burn orchard prunings. Stone-fruit and almond wood build creosote faster than seasoned hardwood, and the air district’s burn windows mean you burn intensely when you can. Annual cleaning keeps the flue safe. Call (980) 580-8641 to schedule.
Can you remove the heavy creosote that orchard wood leaves behind?
Yes. We use a chemical conditioner first when the creosote is too dense and tar-like for brushes alone, then rotary tools to fully remove it. You’ll see before-and-after photos so you know what came out. Call (980) 580-8641 for a written quote.
Chimney Repair in Reedley

Chimney repair in Reedley is often what a cleaning turns up. The combination of Tule fog winters and 105-degree summers stresses mortar joints and brick faces in ways that take years off a chimney, and many of the older homes near downtown are now showing it. Mortar that looked fine in October can be visibly failing by March once the fog season has done its work. A Chimney Repair usually starts with a camera look and a written scope of work, so you know exactly what needs doing and what it costs before we touch anything.
Mortar Repointing
Signs you need it
You can see missing, crumbling, or recessed mortar between the bricks, or sand-like grit collecting at the base of the chimney.
What it costs in Reedley
Mortar repointing in Reedley runs $50 to $75 per square foot, depending on how deep the joints need to be raked and how much scaffolding is involved.
How we do it
We grind out the failed mortar to a proper depth, pack in new mortar matched to the original color and texture, and tool the joints to shed water.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, popping off, or leaving piles of red dust on the roof or ground below the chimney.
What it costs in Reedley
Spalling brick repair in Reedley ranges from $50 to $110 per square foot, and the exact price depends on how many bricks need replacing.
How we do it
We remove the damaged brick, match the replacement as closely as possible, set it in fresh mortar, and then waterproof the repaired area.
Chimney Waterproofing
Signs you need it
You see a dark, damp stain on the chimney interior wall or notice that the brick stays wet for days after rain or fog.
What it costs in Reedley
Chimney waterproofing in Reedley ranges from $6 to $10 per square foot, with a full residential chimney typically landing between $350 and $600.
How we do it
We clean the surface, apply a vapor-permeable masonry sealer that lets the brick breathe, and document the application with photos.
Flashing Repair
Signs you need it
You find water stains on the ceiling near the chimney, or you see rusted, lifted, or missing flashing at the roofline.
What it costs in Reedley
Flashing repair in Reedley costs $350 to $850, depending whether it’s a partial repair or a full replacement with new counter-flashing.
How we do it
We cut back the old flashing, install new step and counter-flashing, and seal every seam with a high-temperature sealant rated for the Valley’s wet winters.
Chimney Rebuilding
Signs you need it
The top section of the chimney is leaning, bricks are falling, or the structure has failed beyond repointing.
What it costs in Reedley
Chimney rebuilding in Reedley runs from $1,600 to $4,000 depending on height and access, and a full rebuild can go higher.
How we do it
We tear down to the point of sound masonry, rebuild with new brick and mortar, then cap and waterproof the completed structure.
What Chimney Repair Costs in Reedley
| Item | Typical range in Reedley |
|---|---|
| Mortar repointing (per sq ft) | $50 - $75 |
| Spalling brick repair (per sq ft) | $50 - $110 |
| Flashing repair / replacement | $350 - $850 |
Do I need a permit for chimney repair in Reedley?
Most mortar repointing and flashing work doesn’t require a permit, but any structural rebuilding may. We’ll tell you plainly which category your repair falls into and who needs to file what before work starts. Call (980) 580-8641 with questions.
Is a leaning chimney in Reedley fixable or does it need a rebuild?
It depends on where the lean is. If only the top few courses have shifted, a partial rebuild often works. If the whole stack has moved, a full rebuild may be the only safe option. We’ll show you photos and give you a written scope. Call (980) 580-8641.
Chimney Liner & Rebuild in Reedley

Chimney liner and rebuild work in Reedley is driven largely by the age of the housing stock. Homes built in the 1910s through the 1950s often have original clay-tile liners that are now cracked, spalled, or missing sections entirely, and once a liner fails, the chimney is no longer safe to use for wood burning. The Tule fog makes it worse: moisture gets into those cracks and freezes and thaws through the winter, widening them each season. Chimney Liner & Rebuild work starts with a camera scan so you can see the liner’s actual condition on screen, then a written quote for exactly what needs replacing.
Stainless Steel Liner
Signs you need it
Your clay liner is cracked, spalled, or missing pieces, and you want a code-compliant, long-term solution.
What it costs in Reedley
A stainless steel liner in Reedley runs from $2,900 to $4,900 including installation, depending on flue height and access.
How we do it
We size the liner to your appliance and flue, drop it down from the top, insulate as required, and connect it to the appliance outlet with a new top plate and cap.
Flexible Liner
Signs you need it
Your flue has bends or offsets, and a rigid liner won’t navigate them without costly demo work.
What it costs in Reedley
A flexible liner in Reedley falls between $2,900 and $4,900 installed, matching the stainless range for most homes.
How we do it
We pull the flexible liner through the existing flue, secure it top and bottom, and install a new rain cap and flashing collar to seal everything.
Liner Replacement
Signs you need it
Your current liner has visible cracks, holes, or is flaking clay into the firebox, and your camera inspection confirms failure.
What it costs in Reedley
Liner replacement in Reedley runs $2,900 to $4,900, and if the old clay needs to be broken out first, the price may move toward the top of that range.
How we do it
We remove the old liner when necessary, prep the flue, and install the new liner system with a written warranty and full photo documentation.
Partial Rebuild
Signs you need it
The top few feet of your chimney are crumbling, but the structure below the roofline is sound.
What it costs in Reedley
A partial rebuild in Reedley ranges from $1,600 to $3,200 depending on how far down we have to go and how much scaffolding is needed.
How we do it
We set up scaffolding, tear out the failed section, reline if the flue is exposed, and rebuild with new brick, mortar, and a proper crown.
Full Chimney Rebuild
Signs you need it
The entire chimney is structurally compromised, leaning, or has failed in multiple places from the firebox up.
What it costs in Reedley
A full chimney rebuild in Reedley generally falls between $8,000 and $14,000, depending on height, material, and access requirements.
How we do it
We demolish the existing structure, set a new footing if required, rebuild the stack with new masonry and liner, and finish with a new crown, cap, and waterproofing.
What Chimney Liner & Rebuild Costs in Reedley
| Item | Typical range in Reedley |
|---|---|
| Stainless steel liner (installed) | $2,900 - $4,900 |
| Partial rebuild | $1,600 - $3,200 |
| Full chimney rebuild | $8,000 - $14,000 |
Do I really need a new liner, or can I just keep using the chimney?
If the camera scan shows cracks or missing clay sections, the chimney is not safe to burn in. Heat and gases can reach the surrounding masonry and framing. We’ll show you the footage so you can decide with your own eyes. Call (980) 580-8641 for an inspection.
How long does a liner installation take in Reedley?
Most stainless steel liner installations are done in one day. If the old clay liner has to be broken out first, expect a second day. We’ll give you a written timeline when you book. Call (980) 580-8641 to schedule.
Brands We Service in Reedley

We install and service components from Gelco, Olympia Chimney, and Copperfield, and our crews keep common sizes of caps, dampers, and chase covers stocked for faster turnaround on Reedley jobs. See our brands for the full list and what we recommend for Valley conditions.
Pricing for Chimney Cleaning in Reedley, CA
| Service | Typical range in Reedley |
|---|---|
| Standard chimney sweep (with Level 1 inspection) | $189 - $329 |
| Level 2 inspection (camera scan) | $199 - $349 |
| Creosote removal (heavy orchard-wood buildup) | $189 - $329+ |
| Soot removal | $189 - $329 |
| Mortar repointing (per sq ft) | $50 - $75 |
| Spalling brick repair (per sq ft) | $50 - $110 |
| Chimney waterproofing | $6 - $10 per sq ft |
| Flashing repair / replacement | $350 - $850 |
| Stainless steel liner (installed) | $2,900 - $4,900 |
| Partial rebuild | $1,600 - $3,200 |
| Full chimney rebuild | $8,000 - $14,000 |
What pushes a Reedley price up is usually access: a steep roof pitch, a chimney that’s hard to scaffold around, or decades of deferred maintenance that’s now visible once we get up there. Whatever we find, you get a written price before work starts, and that price doesn’t change unless you approve a change in scope in writing.
Neighborhoods We Serve in Reedley

We work throughout Reedley and the surrounding unincorporated areas, from the historic streets near downtown to the newer subdivisions on the city’s edges. Here are a few of the neighborhoods we’re in regularly:
- Downtown Reedley (historic district homes from the 1910s-1950s)
- Reedley’s northeast residential areas near Reedley College
- West-side neighborhoods along Manning Avenue
- Post-war tract additions south of the city
- Unincorporated county pockets east toward the Kings River
We schedule Reedley jobs Monday through Saturday, and we’ll give you a two-hour arrival window with a text when the tech is on the way.
Service Area - Cities Near Reedley
Beyond Reedley, we run crews into Selma, CA, Sanger, CA, Clovis, CA, and Fresno, CA. Dispatch and scheduling are coordinated from our Fresno, Central Valley office, with crews that serve Reedley locally. Most nearby jobs are scheduled within the same week.
Serving Reedley, CA - Our Local Coverage Area

We’re based in the Reedley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Reedley
Yes. The San Joaquin Valley Air Pollution Control District announces curtailment days when wood burning is banned or restricted in Reedley, usually on winter days when air quality is poor. Those restrictions compress fireplace use into fewer, more intense burn sessions. Call (980) 580-8641 and we’ll work around the burn calendar.
Most cleaning and inspection jobs in Reedley can be scheduled within five to seven business days. Repair and liner work depends on material availability, but we’ll give you a written timeline before you commit to anything. Call (980) 580-8641 to check current availability.
For a cleaning or inspection, you can be home or away as long as we have access to the fireplace or stove. For repair or rebuild work, we recommend someone be present for the first walkthrough. We’ll confirm access when you book. Call (980) 580-8641 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reedley Customers Say
"They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A.





Before
After
Before
After