Fireplace Services in Clovis - Checked, Photographed, Then Priced

Chimney Cleaning in Clovis, CA

Chimney cleaning in Clovis, CA typically costs between $169 and $389 depending on creosote class and flue type, with most sweeps completed the same day. What makes Clovis jobs different is simple: the San Joaquin Valley Air Pollution Control District restricts wood burning on many winter nights, so homeowners here burn hard when they’re allowed to and not at all when they aren’t. That feast-or-famine pattern builds glaze creosote faster than steady burning does, which is why an annual sweep before the first permitted burn matters more here than almost anywhere else in California. Call (980) 580-8641 for a written quote.

Call (980) 580-8641

Why Clovis Homes Are Different

Clovis grew in waves through the 1980s, 1990s, and 2000s as a master-planned suburb, and that building history shapes what we see inside flues. The tract homes and subdivision builds that dominate the city mostly have factory-built, prefabricated zero-clearance metal fireplaces, not traditional masonry. Those units need metal-rated liner inspections and softer brushing protocols than a brick chimney does. They also have thinner walls that respond badly to moisture pooling inside, which is exactly what happens when tule fog sits on the valley floor for days at a time during winter. Cold air and damp stack up, condensation settles inside the flue, and acidic creosote residue gets wet and corrosive.

The older blocks near Historic Old Town Clovis are the exception. Those mid-20th-century masonry fireplaces were built before camera inspection was routine, and many have never had a full liner evaluation. Summer heat above 105°F expands mortar joints and cracks crowns before burn season even starts. Then the first cold snap arrives, a homeowner fires up the fireplace, and the gap that opened in August becomes a path for heat and gas. What works for a 2005 tract home in Clovis is not what a 1955 Old Town chimney needs, and we quote them differently.

Our Main Clovis Services

Most Clovis homeowners call us first about two things: getting the fireplace working safely again, and protecting the top of the chimney from valley weather. Here is what each involves locally.

Fireplace Services in Clovis

Prefab fireplaces dominate Clovis subdivisions, and they fail differently than masonry units do. We inspect the firebox, refractory panels, damper, and gas line or log set, then explain in plain terms what needs attention now and what can wait. A camera scan shows you what we’re seeing, and you walk away with a written price before anything is booked. Fireplace Services in Clovis covers the full scope, including gas log conversion and glass door replacement.

Chimney Cap & Crown in Clovis

A cracked crown or missing cap in Clovis means water gets into the flue during fog season, and that water mixes with creosote to form acid that eats mortar and metal from the inside out. We replace crowns, install caps with proper spark arrestors for SJVAPCD compliance, and waterproof the exposed masonry. Chimney Cap & Crown in Clovis details pricing and what to look for before the next fog settles in.

Before

After

Chimney Cleaning & Sweep in Clovis

Chimney cleaning and sweep work in Clovis usually runs $169 to $389, and the price is set by how much creosote has built up and what kind of flue you have. The valley’s no-burn curtailment schedule means many Clovis homeowners light fires only on permitted nights, burning short and hot before the fireplace goes cold for weeks. That pattern produces hard, glazed third-stage creosote that standard brushing alone won’t remove. It has to be chemically treated first, and we’ll show you photos of that glaze before we touch it. This is the core of our Chimney Cleaning & Sweep practice.

Creosote Removal

Signs you need it

You smell a sharp campfire odor in the room even when the fireplace is cold, or you see black, shiny tar-like coating on the flue walls during a visual check.

What it costs in Clovis

Creosote removal in Clovis ranges from $189 to $389 depending on whether the buildup is Class II flaky residue or Class III glazed tar requiring chemical treatment.

How we do it

We camera-scan the flue first, classify the creosote stage, then brush and chemically treat the interior before a second camera pass to document the result.

Level 2 Inspection

Signs you need it

You just bought the home, you’ve had a chimney fire, or the last inspection predates your ownership and you have no record of liner condition.

What it costs in Clovis

A Level 2 camera inspection with photo documentation runs $199 to $279 in Clovis when bundled with a sweep, and $249 to $329 as a standalone visit.

How we do it

We run a closed-circuit camera the full length of the flue, inspect the smoke chamber and crown, and hand you a documented photo record before we quote anything.

What Chimney Cleaning & Sweep Costs in Clovis

How often should I have my chimney swept in Clovis?

Once per season or every 40 to 50 fires, whichever comes first. Clovis burn patterns with SJVAPCD curtailment days mean fewer fires but hotter, faster-burning ones, which still build glaze creosote. An annual sweep before the first permitted burn is the safest schedule.

What does Class III creosote mean for my Clovis fireplace?

It means the creosote has hardened into a tar-like glaze that brushing alone won’t remove. In Clovis, we see it often because residents burn intensely on the few permitted nights and then go cold for weeks. Chemical treatment is required, and we’ll show you before and after photos so you know it’s actually gone.

Chimney Repair in Clovis

Chimney repair in Clovis ranges from $250 for minor mortar work to $4,500 for a full rebuild, and the fog is usually what forces the call. Tule fog brings moisture that seeps into cracked mortar, freezes on occasional cold nights, and widens gaps that summer heat already opened. A prefab fireplace in a Clovis tract home usually needs flashing or crown work, while an Old Town masonry chimney is more likely to need repointing or spalling brick replacement. We quote from camera evidence, not from the ground. Full details live on our Chimney Repair hub.

Mortar Repointing

Signs you need it

Mortar joints have visible cracks, gaps, or crumbling sections, especially on the upper third of the chimney where fog and heat cycles hit hardest.

What it costs in Clovis

Mortar repointing in Clovis typically runs $250 to $650 for partial repointing and $700 to $1,400 for full repointing, depending on access and joint condition.

How we do it

We grind out deteriorated mortar to a consistent depth, pack in fresh mortar matched to your brick color, and tool the joints to seal out moisture.

Flashing Repair

Signs you need it

You see water stains on the ceiling near the chimney after rain or fog settles, or the flashing has visible gaps, rust, or lifted sections at the roof line.

What it costs in Clovis

Flashing repair in Clovis is priced at $350 to $900 for partial repair and $900 to $1,800 for full replacement with new step and counter flashing.

How we do it

We remove the old flashing, inspect the underlying roof deck, install new step and counter flashing, and seal every seam before a water test.

What Chimney Repair Costs in Clovis

Can Clovis fog actually damage my chimney?

Yes. Prolonged tule fog creates moisture that sits on mortar and brick for days. When that moisture soaks in and then heats up during a fire, it expands and spalls the brick face. Over one season, the damage is visible; over five, it’s structural.

Do I need a repair before I can use my fireplace in Clovis?

If the camera scan shows gaps in the flue, missing mortar, or cracked crown, yes, you should not burn until it’s repaired. Heat and gas can escape through those gaps into wall cavities. We’ll show you the scan images and tell you plainly whether it’s safe to burn or not.

Chimney Liner & Rebuild in Clovis

Chimney liner and rebuild work in Clovis runs $1,200 to $6,500, and the deciding factor is usually what the camera shows inside the flue. Prefab fireplaces in Clovis subdivisions often have thinner metal liners that corrode faster when fog condensation sits inside them for days. An Old Town masonry chimney might have no liner at all, or a clay tile liner cracked by five decades of valley heat cycles. Either way, the fix is specific: a new stainless liner, a partial rebuild, or a full tear-down. Details and full scope are on our Chimney Liner & Rebuild page.

Stainless Steel Liner

Signs you need it

Your camera scan shows cracked clay tiles, rust-through on a metal liner, or you have a masonry chimney with no liner at all and want to burn safely.

What it costs in Clovis

Stainless steel liner installation in Clovis ranges from $1,800 to $3,500 for a standard one-story flue, with taller or offset flues running higher.

How we do it

We size the liner to your appliance, drop it down the flue, connect it at the appliance collar and the top plate, and insulate if needed before a camera confirmation pass.

Partial Rebuild

Signs you need it

The top courses of brick are spalling or loose, the crown is destroyed, or the flue tiles near the top are cracked while the lower chimney is sound.

What it costs in Clovis

A partial chimney rebuild in Clovis runs $2,500 to $4,500, covering the top 3 to 5 feet of masonry, new flue tiles, crown, and cap.

How we do it

We tear down to solid structure, set new flue tiles, rebuild the brick to match, pour a new crown, and cap it before the final photo record.

What Chimney Liner & Rebuild Costs in Clovis

Do Clovis prefab fireplaces need a liner replacement?

Sometimes, yes. The metal liners in zero-clearance fireplaces are thinner than masonry flue tiles and corrode faster when fog moisture sits inside them. If the camera shows rust-through or separation, replacement is the only safe option. We’ll show you the scan before you decide.

Can I just reline instead of rebuilding my Clovis chimney?

Often, yes, if the brick structure is still sound. A stainless liner handles the flue passage, but it won’t fix spalling brick or a collapsed crown. We tell you when relining is enough and when a rebuild is actually required, with photos showing why.

Brands We Service in Clovis

We install and service chimney systems from Gelco, Olympia Chimney, and Copperfield, with parts sourced through Haven’s buying network to keep Clovis pricing honest. Stocked locally means faster turnaround on cap replacements, liner kits, and crown materials. See our brands for the full list.

Pricing for Chimney Cleaning in Clovis, CA

Neighborhoods We Serve in Clovis

We work across Clovis and typically schedule within a few days, depending on the season and burn curtailment schedule.

• Historic Old Town Clovis
• Buchanan Estates
• Loma Vista
• Clovis East area
• Harlan Ranch

Service Area - Cities Near Clovis

Our Clovis-based crews also serve nearby Central Valley communities. If you’re in Fresno, CA, Sanger, CA, Madera, CA, or Selma, CA, we can schedule there too, with the same written price and photo record on every job.

FAQs About Chimney Cleaning in Clovis