Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Fireplace Services Across Marietta
Fireplace service in Marietta usually falls into one of two camps: a century-old masonry stack near Marietta Square, or a 1980s-90s prefabricated fireplace in an East Cobb subdivision. The service call looks completely different for each. Emberly Chimney Cleaners sends technicians trained on both systems, and we include a camera scan of the flue on every visit so you can see exactly what’s happening inside your chimney before anyone picks up a tool. A gas fireplace service or damper repair in Marietta typically runs $175-$395, depending on what the camera finds. Call (980) 580-8641 and we’ll give you a written price before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Emberly Chimney Cleaners Is Marietta’s Preferred Fireplace Services Company
Marietta homeowners ask us for two things: a straight answer about what’s actually wrong, and a price they can hold us to. We’ve built our reputation here on delivering both. Since 2009, we’ve completed more than 38,000 chimney inspections and cleanings, every single one with a written price before work started and a documented photo record when it was done. That record isn’t optional for us. Clause 4 of the Haven Standard requires a camera scan and photo documentation on every job, and we’ve operated that way since before most insurers thought to ask.
Our crews serve Marietta neighborhoods from Fort Hill Street to the subdivisions off Whitlock Avenue and the East Cobb corridor. Corrine Halstead, our owner, insists that every technician assigned to a Marietta job can explain the difference between a clay tile flue and a zero-clearance metal system in plain English, because both show up on the same route here. Marietta is the only city in metro Atlanta where a single chimney route routinely crosses from original late-1800s clay tile flues around Marietta Square to 1980s-90s prefabricated zero-clearance fireplaces in East Cobb. That’s a 20-minute drive that would be two entirely different service calls for a company without dual-system training.
We answer the phone with a live person, 24 hours a day. When you book, you get a named technician, a text when they’re on the way, and license information you can verify. No voicemail maze, no web form that goes nowhere.
Our Fireplace Services in Marietta
Fireplace Insert Service
In East Cobb and northwest Marietta, most homes built between 1980 and 1999 have prefabricated fireplaces with metal flue systems. The inserts installed in those units corrode at the joints over time, and a camera inspection is the only way to confirm where the failure is without tearing out drywall. We service inserts from the major brands and our Fireplace Services techs will show you the camera footage before recommending a repair or replacement. A typical insert service in Marietta runs $225-$425, depending on the unit and access.
Firebox Repair
A cracked firebox panel in a masonry fireplace near Marietta Square isn’t the same as a cracked refractory panel in a zero-clearance box in East Cobb. The repair materials and methods are different, and quoting the wrong one is the fastest way to waste money. We use materials from HeatShield, Gelco, and Copperfield, and we’ll show you photos of the damaged area before we quote. Firebox repair in Marietta typically runs $300-$700 for panel replacement, with more extensive mortar reset work running higher.
Fireplace Conversion
Converting a wood-burning fireplace to gas in Marietta usually means running a gas line, installing a gas log set or insert, and often addressing venting that was never designed for a gas appliance. Older Marietta Square homes with original clay tile flues often need the flue addressed before a gas conversion is safe, because gas exhaust behaves differently than wood smoke in an unlined or cracked clay stack. The humid subtropical climate matters too: gas appliances produce acidic condensate that accelerates clay tile deterioration. A typical gas conversion fireplace in Marietta runs $2,800-$6,500, depending on the liner and log set.
Damper Repair
Dampers on older Marietta fireplaces seize from rust and creosote buildup. Many homes around Marietta Square still have their original throat dampers, and a seized damper is often the first thing we find on a service call. On a Fort Hill Street fireplace service visit near Marietta Square, our tech pulled a Gelco damper that had seized partially open on a century-old masonry firebox. The clay flue liner behind it showed stage-three glazed creosote from years of infrequent pine fires. We spent the afternoon showing the homeowner camera footage of the spalled liner sections before recommending a HeatShield resurfacing rather than a full rebuild. Damper repair in Marietta runs $180-$340 in most cases.
BeforeAfterTrusted Brands We Service in Marietta
We stock replacement parts and repair materials for the brands most common in Marietta homes. For factory-built fireplaces in East Cobb and the surrounding subdivisions, that means Olympia Chimney and Famco components, including flue joints and refractory panels. For masonry repair work around Marietta Square, we keep Gelco dampers and Copperfield caps in the truck, so a damper replacement doesn’t turn into a two-visit job. When we need to order a specific liner or resurfacing material, we source through the Haven buying network, which keeps the price on your written quote steady. Our Fireplace Services in Marietta customers see the part names and part numbers on the written scope before we touch anything.
Common Fireplace Problems We See in Marietta Homes
- Glazed creosote from pine wood. The loblolly and Virginia pines blanketing Marietta neighborhoods, especially near the Kennesaw Mountain foothills and older East Cobb subdivisions, lead homeowners to burn downed pine as free firewood. Pine’s high resin content produces creosote fast. A flue we clean in October can be coated in dangerous deposits by January if pine was burned through the holidays.
- Spalled clay tile liners in historic homes. The late-1800s and early-1900s brick homes around Marietta Square often have original single-flue clay tile liners. Decades of thermal cycling, interrupted by long periods of humid inactivity, cause those tiles to crack and separate. We show the camera footage, and we don’t recommend a liner replacement unless the footage warrants it.
- Corroded metal flue joints in zero-clearance units. The 1980s-90s tract homes in East Cobb and northwest Marietta were built with prefabricated fireplaces that use lightweight metal flue systems. The joints corrode and separate, especially in humid crawlspaces and attics. A tech trained only on masonry chimneys might quote a full relining job when the actual problem is a $400 joint repair two feet above the firebox.
- Deteriorated crowns letting water in. Mortar crowns on older Marietta masonry chimneys crack from freeze-thaw cycles, even though Marietta’s freezes are mild. Water seeps in, the crown erodes further, and the homeowner gets told the flue needs replacement when the real fix is a crown repair. We’ll show you the difference on camera.
Pricing for Fireplace Services in Marietta, GA
Here are the numbers we quote most often on Marietta jobs, written plainly so you can compare them with any other estimate you’re holding. A fireplace sweep and camera inspection runs $185-$275. Basic damper replacement runs $180-$340. Firebox panel replacement runs $300-$700. A gas fireplace service call runs $175-$325, and a full gas conversion from a wood-burning fireplace runs $2,800-$6,500, depending on the liner and the log set. These are written prices: scope, materials, and labor, in plain language, before work starts. That’s Clause 1 of the Haven Standard, and it’s been the rule since 2009. If another company has given you a written estimate, bring it in. We’ll give you a free second opinion and show you our camera footage side by side with theirs. Call (980) 580-8641 for a price on your specific fireplace.
We Also Serve Cities Near Marietta
Our Marietta crews regularly run service calls to Smyrna, Kennesaw, Atlanta, and Mableton. Scheduling and dispatch are coordinated from the brand’s Atlanta office, with crews serving Marietta locally. If you’re in one of those cities and need fireplace service with a camera scan and a written price, call (980) 580-8641 and we’ll get you on the schedule the same week.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Marietta
The real risk is creosote ignition in a cracked clay flue that hasn’t been inspected, and a slow water leak that turns into spalling and eventually a full chimney rebuild. Homes around Marietta Square and the Whitlock Avenue corridor built before 1920 often have original unlined or clay-tile flues that were never brought up to modern code. A camera scan will show you the exact condition of the tile joints and any spalling. If the flue is still serviceable, we’ll tell you that plainly, and we won’t recommend a new stainless liner because a salesperson said “cracked” without showing proof. Call (980) 580-8641 and we’ll put you on the schedule for a Level 2 camera inspection with a written condition report.
If you burn pine regularly, plan on a sweep and inspection every 50 to 60 fires, not once a year. Pine resin from loblolly and Virginia pines creates third-stage glazed creosote quickly, especially in the cold, short bursts typical of Marietta winters. Lightly used fireplaces that only get lit 20 to 40 days a year, often during sudden cold snaps, can actually be more hazardous than a daily-burn fireplace because the firebox never reaches the sustained high temperatures that would burn off lighter creosote deposits. After a season of pine burning, get a camera scan before you light the first fire of the next season. Call (980) 580-8641 and we’ll inspect the flue and give you a written condition report.
The inspection protocol, the tools, and the repair materials are all different. A masonry chimney around Marietta Square needs a visual and camera inspection of the clay tile liner, mortar joints, crown, and smoke chamber. A zero-clearance unit from the 1980s-90s in East Cobb needs a check of the metal flue joints, the refractory panels, the gaskets, and the termination cap. The camera still goes down the flue in both cases, but what we’re looking for and what we can reasonably repair are not the same. A company that doesn’t do both systems well will misdiagnose one or the other. We do both, and our techs can explain the difference while you watch the footage. Call (980) 580-8641 to schedule either type of inspection.
Yes, in most cases. We assess firebox condition with the camera and a visual inspection of the refractory panels or firebrick, and we’ll show you photos of any cracked or missing sections before anyone touches the unit. If the firebox is behind a gas insert or a fabricated liner, we may need to partially remove it for access, but we’ll explain exactly why and add the scope to your written estimate before starting. No one on our crew starts pulling equipment without your sign-off in writing. Call (980) 580-8641 and ask about a firebox camera inspection.
Yes, and the main one is condensate. Gas exhaust produces acidic moisture that condenses inside a chimney, and Marietta’s humid subtropical air makes that process worse in masonry flues that stay cool between burns. In an unlined or clay-tile flue, that acidic condensate eats at the masonry. For a gas conversion in a Marietta home, most codes require a properly sized stainless or aluminum liner rated for gas exhaust, and we’ll show you the liner spec on your written scope. In a zero-clearance unit, the venting may already be compatible, but we’ll verify with a camera scan. A typical gas conversion in Marietta runs $2,800-$6,500. Call (980) 580-8641 for a written estimate on your specific fireplace.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Marietta, GA under the Haven Standard with documented camera inspections and written pricing on every job.