Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Johns Creek, GA
Chimney cleaning in Johns Creek usually costs $169 to $239 for a standard sweep with a Level 1 inspection, and the defining factor isn’t creosote volume, it’s the age of the factory-built zero-clearance fireplaces in the city’s executive homes. Most houses here were built between 1988 and 2008 in master-planned subdivisions like Medlock Bridge, Northgate, and St. Ives, and their prefabricated fireplace systems are now 20 to 35 years old, which means every cleaning visit doubles as a liner and firebox integrity check. Call (980) 580-8641 for a written price before any work starts.
Why Johns Creek Homes Are Different
Johns Creek developed as an upscale executive suburb, and the housing stock reflects that: large two-story homes, often with two, three, or even four factory-built fireplaces, including master-bedroom units nobody thinks about until an inspection finds 25-year-old oxidation on the metal panels. Those zero-clearance systems age whether you burn them or not. Homeowners frequently converted wood-burning units to gas logs, leaving metal flue liners in place, liners that still gather moisture and rust in Georgia’s humid air.
The climate compounds it. Winters here are short and mild, so fires burn low and smolder, which means heavy, sticky creosote deposits rather than the dry ash you get from sustained hot burns. Western Johns Creek sits near the Chattahoochee River corridor, and that ambient humidity accelerates rust on prefab fireplace components and deteriorates mortar on the fewer true masonry chimneys. Technicians working St. Ives and Medlock Bridge routinely find master-bedroom flues with bird nesting and significant oxidation, and the homeowner didn’t even know the flue existed.
Our Main Johns Creek Services
Two services account for most of the calls we get from Johns Creek homeowners: fireplace system work, and repairs to the cap and crown that protect the top of the flue. Here’s what each involves locally.
Fireplace Services in Johns Creek
Prefabricated zero-clearance fireplaces dominate Johns Creek, and most of them are aging past their designed service life. A Fireplace Services in Johns Creek visit covers gas log conversion checks, firebox panel inspection, damper function, and the condition of the metal flue liner above the unit. The master-bedroom fireplace that has never been swept is a Johns Creek signature finding, and it’s usually hiding oxidation and nesting that a camera scan catches in minutes.
Chimney Cap & Crown in Johns Creek
Humidity from the Chattahoochee corridor weakens mortar crowns, and a cracked crown lets water into the flue system year-round. Chimney Cap & Crown in Johns Creek work covers cap replacement, crown resurfacing, and sealing the chase top on prefab units. In subdivisions like Northgate and Medlock Bridge, we see rusted chase covers on zero-clearance chimneys more often than cracked masonry crowns.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Johns Creek
Chimney sweep in Johns Creek starts with a camera-scan inspection under NFPA 211 Level 2, because the city’s batch of 1990s and early-2000s prefab fireplaces has reached the age where liner integrity matters as much as creosote volume. Low-temperature smoldering fires in short Georgia winters leave heavy, sticky deposits, and that’s true even in gas-converted units where moisture and rust accumulate without a single wood fire. Our Chimney Sweep service always ends with a documented photo record, not a verbal summary.
Level 1 Inspection
Signs you need it
You burn fires regularly and want the accessible portions of the fireplace, flue, and chimney checked for basic soundness and deposit buildup.
What it costs in Johns Creek
A Level 1 inspection in Johns Creek typically runs $169 to $239, and it’s included with a standard chimney sweep or cleaning.
How we do it
We inspect the firebox, damper, visible flue interior, and exterior chimney while removing accessible creosote and soot buildup.
Creosote Removal
Signs you need it
You see dark, tar-like glaze on the firebox walls or smell a sharp, smoky odor from the fireplace even when it’s cold.
What it costs in Johns Creek
Creosote removal in Johns Creek costs $350 to $575, depending on whether it’s class II or the harder class III glazed form.
How we do it
We use rotary loop tools and chemical treatments to break down glazed creosote, then vacuum every loosened particle from the flue and smoke chamber.
Level 2 Inspection
Signs you need it
You’ve bought a Johns Creek home with a prefab fireplace, converted to gas logs, or had a chimney fire, and you need the flue interior camera-scanned.
What it costs in Johns Creek
A Level 2 inspection in Johns Creek costs $200 to $350 standalone, including a video scan of the entire flue interior and a written photo report.
How we do it
We run a camera down the entire flue length, checking liner seams, offset sections, and the smoke chamber, then deliver the footage with a written condition summary.
Soot Removal
Signs you need it
You notice fine black dust on the mantel or hearth, or the firebox accumulates soot after every gas-log burn.
What it costs in Johns Creek
Soot removal in Johns Creek falls within the $169 to $239 range for a standard cleaning, rising if the soot extends deep into the flue.
How we do it
We brush and vacuum the firebox, damper, and flue path, then wipe down the visible hearth area so no residue circulates back into the room.
Annual Sweep
Signs you need it
It’s been more than 12 months since the last cleaning, or you burn fires through every cold snap and want a documented maintenance record.
What it costs in Johns Creek
An annual sweep in Johns Creek costs $169 to $239 and includes a Level 1 inspection with a written condition report.
How we do it
We sweep the full flue length, clear the smoke shelf and damper area, and leave you with photos of the before-and-after condition.
What Chimney Sweep Costs in Johns Creek
| Item | Typical range in Johns Creek |
|---|---|
| Chimney sweep with Level 1 inspection | $169 - $239 |
| Level 2 inspection with camera scan | $200 - $350 |
| Creosote removal (class II or III) | $350 - $575 |
How often should I have my chimney swept in Johns Creek?
Annual, even if you have gas logs. Johns Creek’s humidity rusts prefab liners and smoke chambers regardless of wood burning. A yearly sweep includes the inspection that catches liner damage before water intrusion spreads through the chase.
Does gas log conversion mean I never need a sweep?
No. Converted Johns Creek fireplaces still have metal flue liners that collect moisture and oxidize. Call (980) 580-8641 for an exact quote on an inspection and cleaning, and we’ll show you the liner condition on camera.
Chimney Repair in Johns Creek
Chimney repair in Johns Creek usually targets the moisture damage that comes from the city’s river-adjacent humidity: rusted chase covers, cracked mortar, and spalling brick on the smaller number of true masonry chimneys. On prefab units, the repair question is usually about panel replacement and chase-top sealing, because a 25-year-old zero-clearance firebox degrades even during Georgia’s mild winters. Our Chimney Repair work starts with the same camera documentation we’ve used on every job since 2009.
Mortar Repointing
Signs you need it
You see crumbling or receding mortar joints on your brick chimney, or water stains appear on interior walls near the fireplace.
What it costs in Johns Creek
Mortar repointing in Johns Creek runs $750 to $1,500, depending on the surface area and depth of deteriorated joints.
How we do it
We remove deteriorated mortar to a proper depth, then tuck fresh, color-matched mortar into each joint and seal the surface against moisture entry.
Flashing Repair
Signs you need it
You notice water staining on ceilings or walls near the chimney after heavy Georgia rain, or the flashing has visible rust and lifted edges.
What it costs in Johns Creek
Flashing repair in Johns Creek typically costs $400 to $900, including sealing the roof-to-chimney junction.
How we do it
We replace or reseal the step and counter flashing where the chimney meets the roof, then test the seal to stop water migration into the attic or chase.
Chimney Waterproofing
Signs you need it
Your chimney or chase shows consistent dampness, efflorescence on brick, or recurring rust stains on metal components.
What it costs in Johns Creek
Chimney waterproofing in Johns Creek runs $250 to $500 for a standard chimney or prefab chase structure.
How we do it
We apply a vapor-permeable sealant designed for masonry or prep and coat metal chase exteriors so water stays out while trapped moisture can still escape.
What Chimney Repair Costs in Johns Creek
| Item | Typical range in Johns Creek |
|---|---|
| Mortar repointing | $750 - $1,500 |
| Flashing repair | $400 - $900 |
| Chimney waterproofing | $250 - $500 |
Is my 25-year-old prefab fireplace worth repairing?
Often yes, if the firebox panels and metal flue liner are intact. A camera scan shows exactly what’s failing. If the chase is solid, replacing panels and a chase cover costs far less than a full rebuild. Call (980) 580-8641 and we’ll show you the footage.
Do I have to fix a small crack in the crown right away?
In Johns Creek’s humidity, a small crown crack opens a path for moisture that accelerates rust and mortar decay year-round. Repairing it early is cheaper than waiting. We’ll give you a written price before any work starts.
Chimney Liner & Rebuild in Johns Creek
Chimney liner and rebuild work in Johns Creek is driven by the simple fact that the city’s prefab fireplaces and their metal flues were installed 20 to 35 years ago, and the original liners are now at or past their designed service life. Even a fireplace that has never burned wood can have a liner that’s rusted through at the seams, and that’s a safety issue whether the unit runs on gas or wood. Our Chimney Liner & Rebuild service replaces what’s failing with materials sourced from Gelco and Olympia Chimney, and every job receives a documented photo record before the tech leaves.
Stainless Steel Liner
Signs you need it
Your existing clay tile liner is cracked or your metal prefab flue shows perforation on camera scan, and you want a rigid, long-term solution.
What it costs in Johns Creek
A stainless steel liner in Johns Creek costs $2,500 to $7,000, with the range driven by flue length and whether an insulation wrap is used.
How we do it
We size the liner to the existing flue, insulate as required, then connect it properly to the appliance collar and top plate, followed by a full camera verification.
Liner Replacement
Signs you need it
Your camera inspection shows liner seam separation, rust-through, or a previous liner that’s warped, and moisture is entering the chase.
What it costs in Johns Creek
Professional liner replacement in Johns Creek typically runs $2,500 to $7,000, with partial replacement of short, straight sections on the lower end of that range.
How we do it
We remove the failed liner, inspect the chase and firestop, install the new liner with proper termination, and document every layer with photos as we go.
Full Chimney Rebuild
Signs you need it
Your chimney has structural failure beyond the liner: spalling brick, a leaning upper section, or a firebox that’s no longer able to hold panels safely.
What it costs in Johns Creek
A full chimney rebuild in Johns Creek ranges from $8,000 to $25,000 depending on the existing masonry and whether the firebox is reused.
How we do it
We dismantle and rebuild the firebox, smoke chamber, and flue structure to NFPA 211 standards, with a written warranty and photo documentation at every stage.
What Chimney Liner & Rebuild Costs in Johns Creek
| Item | Typical range in Johns Creek |
|---|---|
| Stainless steel liner installation | $2,500 - $7,000 |
| Liner replacement (partial or full) | $2,500 - $7,000 |
| Full chimney rebuild | $8,000 - $25,000 |
Do I really need a new liner if I only have gas logs?
Maybe. Johns Creek’s humid climate rusts metal liners even without wood smoke. Your camera-scan inspection will show whether the liner is sound or whether moisture has started working through it. We’ll never recommend a liner without that footage in your hands.
What happens if I skip liner repair?
Water enters the chase and rusts surrounding metal parts, and combustion gases can leak into the home if the liner perforates. The fix is always cheaper before the problem spreads. Call (980) 580-8641 for a written quote and camera evidence.
Brands We Service in Johns Creek
We work on zero-clearance prefab fireplaces and metal flue systems found throughout Johns Creek, stock common replacement parts for Gelco and Olympia Chimney units, and source materials through our buying network to keep costs straight. Visit our brands page for the full list of what we service and what we stock locally.
Pricing for Chimney Cleaning in Johns Creek, GA
| Service | Typical range in Johns Creek |
|---|---|
| Chimney sweep with Level 1 inspection | $169 - $239 |
| Level 2 inspection with camera scan | $200 - $350 |
| Creosote removal (class II or III) | $350 - $575 |
| Mortar repointing | $750 - $1,500 |
| Flashing repair | $400 - $900 |
| Chimney waterproofing | $250 - $500 |
| Stainless steel liner installation | $2,500 - $7,000 |
| Full chimney rebuild | $8,000 - $25,000 |
What pushes price up in Johns Creek is age: a 30-year-old prefab system with a rusted chase and a class III creosote glaze will cost more than a 2010-era unit that’s been maintained. The one thing that doesn’t change is how you’re quoted, because a written price, written scope, and written warranty arrive before any work starts, every time.
Neighborhoods We Serve in Johns Creek
We cover the full Johns Creek area, and most jobs in these neighborhoods are reached within one business day. The bulk of our chimney cleaning and inspection work is concentrated in the older subdivisions, where the housing stock is at its service-life peak for prefab systems.
- Medlock Bridge
- Northgate
- St. Ives
- Country Club of the South
- Bellmoore Park
Service Area - Cities Near Johns Creek
Our crews work throughout north Fulton and into the surrounding metro, from Atlanta, GA on the city’s northern edge to Sandy Springs, GA, Roswell, GA, and Alpharetta, GA. Johns Creek sits in the center of that coverage area, and dispatch is coordinated from our Atlanta office with local crews serving Johns Creek directly.
Serving Johns Creek, GA - Our Local Coverage Area
We’re based in the Johns Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Johns Creek
Most Johns Creek appointments are scheduled within one to two business days, and you’ll receive a text when your named technician is on the way. We give a firm arrival window when you book, never an all-day range.
Most Johns Creek HOAs require approval only for exterior changes, like a different cap style or a chase-top replacement color. Interior cleaning and inspection work typically needs no approval. We can provide a written scope for your HOA if asked.
No camera scan is ever an upsell. Clause 4 of the Haven Standard requires a documented photo record on every visit, and that has been our default since 2009. You leave with the footage and the written report, included. Call (980) 580-8641 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Johns Creek Customers Say
"Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F.