Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Grapevine, TX
Chimney cleaning in Grapevine typically runs $189-$329 for a standard sweep with a Level 1 inspection, and $389-$549 when a camera scan is added. Homes here skew heavily toward 1985-1998 builder-grade masonry and zero-clearance prefab units, which means the fall rush before the Christmas Capital of Texas lighting season is real and predictable. Call (980) 580-8641 and we’ll give you a written price before anyone sets foot in your home.
Why Grapevine Homes Are Different
Most Grapevine chimneys we open fall into two camps. The first is a true masonry fireplace built during the 1985-1998 DFW Airport growth boom, now 25-40 years old, with mortar joints and crowns reaching end-of-life together. The second is a zero-clearance metal firebox hidden behind a brick veneer chase, a builder shortcut used widely in Tarrant County tract homes of that era. The two need completely different inspection protocols and often very different repair scopes.
North Texas clay soil does not sit still. Drought-and-rain cycles make footings and crowns crack and shift. Lake Grapevine adds slightly elevated humidity compared to inland DFW suburbs like Coppell, which accelerates spalling brick and mortar washout on exterior chimney faces. In practical terms, a chimney that passed a visual check three years ago may have a cracked crown and washed-out mortar bed today.
So when we clean a Grapevine chimney, we are not just removing soot. We’re checking for the specific failure pattern this housing stock produces: crown cracks from clay-soil movement, spalling on lake-humidity-exposed faces, and flue liner gaps that nobody looked at when the fireplace changed hands.
Our Main Grapevine Services
Chimney cleaning is the first call most Grapevine homeowners make. These two services are the calls that usually follow once the camera comes back up.
Fireplace Services in Grapevine
Zero-clearance fireboxes from the 1980s and 1990s fail in predictable ways: warped panels, rusted refractory liners, and seams that open under heat. If your Grapevine fireplace is a metal unit behind a brick chase, it needs a different inspection than a true masonry firebox. We measure clearances, check the firebox seams, and document everything with photos. Fireplace Services in Grapevine covers the full scope, including gas log lines and refractory panel replacement.
Chimney Cap & Crown in Grapevine
A cracked crown on a Grapevine chimney lets rain straight into the brickwork, and with lake humidity already working against you, spalling follows quickly. We see crowns on 1985-1998 homes with stress cracks from clay-soil movement that owners never noticed because nobody goes up on the roof. Chimney Cap & Crown in Grapevine details crown replacement, cap sizing, and the stainless steel mesh options we install most often here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Grapevine
Chimney sweeping in Grapevine is the service most homeowners book between September and November, ahead of the holiday season this city takes seriously. A standard sweep removes soot and creosote buildup, and on the 25-40-year-old chimneys common here, it needs to be paired with a real inspection rather than a glance up the flue. Our parent service page covers the full process: Chimney Sweep.
Level 1 Inspection
Signs you need it
You use the fireplace regularly and it has been more than a year since anyone looked inside the flue.
What it costs in Grapevine
A Level 1 inspection runs $189-$329 on its own and is included with every standard sweep we book in Grapevine.
How we do it
We check the accessible portions of the chimney, the firebox, the damper, and the visible exterior, then give you a written report and photo record before we leave.
Creosote Removal
Signs you need it
You see shiny, tar-like buildup on the firebox walls or smell a strong campfire odor even when the fireplace is cold.
What it costs in Grapevine
Creosote removal in Grapevine runs $250-$450 when heavy glaze is present, depending on whether it is Stage II or Stage III buildup.
How we do it
We run rotary brushes and chemical treatment for Stage III glaze, then camera-scan the flue to confirm the creosote is gone rather than just knocked loose.
What Chimney Sweep Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Standard sweep with Level 1 inspection | $189 - $329 |
| Glazed creosote removal | $250 - $450 |
| Level 2 camera inspection add-on | $200 - $220 |
How often should I have my Grapevine chimney cleaned?
Every year if you burn wood more than a few times per season. Grapevine’s holiday fireplace use is concentrated into six to eight weeks, but creosote accumulates year after year and does not reset in the summer.
Can you clean a chimney the same week in fall?
Usually yes, if you book by early November. Once the Christmas Capital of Texas season starts in late November, the schedule compresses fast. Call (980) 580-8641 and we’ll tell you the first open date.
Chimney Repair in Grapevine
Chimney repair in Grapevine usually comes after a camera inspection finds something the naked eye missed: stress cracks in the crown, washed mortar beds, or spalled brick faces from lake humidity. We write the repair scope from what we can document, not from what we think looks weak. See Chimney Repair for the full breakdown.
Mortar Repointing
Signs you need it
Mortar joints are crumbly, recessed more than a quarter inch, or visibly missing between bricks on the exterior chimney face.
What it costs in Grapevine
Mortar repointing in Grapevine typically runs $800-$2,500 depending on the square footage of the chimney face.
How we do it
We grind out the old mortar to a consistent depth, pack in fresh type-N mortar, and tool the joints to match the original profile.
Chimney Waterproofing
Signs you need it
Water stains appear on the ceiling near the chimney after heavy rain, or brick faces show white efflorescence deposits.
What it costs in Grapevine
Chimney waterproofing in Grapevine runs $350-$750 for a full exterior application after any needed repairs are done.
How we do it
We clean the brick first, then spray a vapor-permeable masonry water repellent so the chimney can still breathe while blocking rain.
What Chimney Repair Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Mortar repointing | $800 - $2,500 |
| Chimney waterproofing | $350 - $750 |
| Flashing repair | $450 - $1,200 |
Do I really need to repoint, or can it wait?
If you can see missing mortar, water is already getting behind the brick. It rarely gets better on its own in Grapevine’s weather cycle. Call (980) 580-8641 and we’ll give you a camera-backed answer, not a pressure pitch.
Will my repair match the original brick?
We stock mortars and brick sources that match the 1980s and 1990s Tarrant County palette common in Grapevine. Repointing and spalling repair are matched to your specific elevation, and we show you the materials before we start.
Chimney Liner & Rebuild in Grapevine
Chimney liner and rebuild work in Grapevine is most often on homes from the 1985-1998 boom where the original clay tile liner has cracked or the firebox has warped beyond repair. Clay-soil movement cracks the chimney structure, and once the liner loses integrity, the fireplace is unsafe to burn. Chimney Liner & Rebuild covers the full scope.
Liner Replacement
Signs you need it
The camera scan shows cracked clay tiles, missing mortar between liner sections, or a gap the smoke can escape through into the chase.
What it costs in Grapevine
Liner replacement in Grapevine runs $2,900-$5,900 for stainless steel, depending on flue length and whether a chase cover is needed.
How we do it
We size the new stainless steel liner to the appliance, drop it down the existing flue, and insulate the annulus so the liner drafts correctly.
Partial Rebuild
Signs you need it
The crown is cracked wide open, the top courses of brick are loose, or the smoke chamber is visibly failed from inside.
What it costs in Grapevine
A partial chimney rebuild in Grapevine runs $3,500-$8,000 depending on how many courses of brick need to be taken down and reset.
How we do it
We tear down to sound brick, rebuild the damaged section, pour a new concrete crown, and cap the whole thing with a properly sized chase cover.
What Chimney Liner & Rebuild Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Stainless steel liner replacement | $2,900 - $5,900 |
| Partial chimney rebuild | $3,500 - $8,000 |
| Full chimney rebuild from roofline | $8,000 - $18,000 |
How do I know if I need a new liner or just a sweep?
Only a camera scan tells you for sure. If the flue is solid, you pay for a sweep and move on. If the liner is cracked, we show you the footage and you decide with the photos in front of you. Call (980) 580-8641 for a written quote.
Can a cracked liner be patched instead of replaced?
Sometimes, using HeatShield or a similar resurfacing system, but only if the underlying flue is structurally sound. In Grapevine’s clay soil, structural cracks in the chimney itself usually point toward replacement rather than patch work.
Brands We Service in Grapevine
We stock and install parts from Gelco, Olympia Chimney, and Famco, including caps, chase covers, dampers, and liner components. Most common parts are on the truck, and anything special-ordered lands within a week. See our brands for the full list.
Pricing for Chimney Cleaning in Grapevine, TX
| Service | Typical range in Grapevine |
|---|---|
| Standard chimney sweep with Level 1 inspection | $189 - $329 |
| Level 2 camera inspection add-on | $200 - $220 |
| Glazed creosote removal | $250 - $450 |
| Mortar repointing | $800 - $2,500 |
| Chimney waterproofing | $350 - $750 |
| Flashing repair | $450 - $1,200 |
| Stainless steel liner replacement | $2,900 - $5,900 |
| Partial chimney rebuild | $3,500 - $8,000 |
| Full chimney rebuild from roofline | $8,000 - $18,000 |
What pushes price up in Grapevine is usually the age of the chimney. A 1988 builder-grade unit that has never had a crown repaired may need repointing or waterproofing before a sweep makes sense. Whatever the number is, you get it in writing before any work starts, under Clause 1 of the Haven Standard.
Neighborhoods We Serve in Grapevine
We work throughout Grapevine, from the 1980s tracts near the lake to newer subdivisions along the northern edge of town. Most jobs are reached within a day or two outside the fall rush.
- Heritage
- Lakeview
- Mockingbird Hill
- Pecan Park
- Woodbridge
Service Area - Cities Near Grapevine
We serve the surrounding DFW suburbs with the same written-price-before-work policy. That includes Southlake, TX, Colleyville, TX, Euless, TX, and Coppell, TX. Scheduling is coordinated from the brand’s Dallas-Fort Worth office, and crews serve Grapevine locally.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Grapevine
Most chimney cleaning and repair work does not require a permit in Grapevine. A full chimney rebuild from the roofline may, depending on scope. We handle the permit application when needed and tell you up front if yours is that kind of job.
September and October are ideal. Once the Christmas Capital of Texas season starts in late November, the schedule fills quickly and you may wait longer for an open slot. Book early and you’ll have the fireplace ready before the first cold front.
Yes. About a third of our Grapevine calls come from buyers in the inspection period. We run a Level 2 camera inspection and give you photos and a written Scope of Work you can take to the seller or the negotiation table. Call (980) 580-8641 for scheduling and a written quote.
Call Emberly Chimney Cleaners at (980) 580-8641 for a free estimate on chimney cleaning in Grapevine. Every quote is written, every job gets a documented photo record, and if it is not done right, we make it right.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grapevine Customers Say
"We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V.