Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Grapevine
Chimney cap and crown work in Grapevine typically runs $275-$1,400 depending on whether you need a cap replacement, crown repair, or coating, and most jobs are completed in a single visit. We schedule by written scope: camera down the flue, photo record included, price in hand before any work starts. If your cap is rusted through or your crown is cracking, this page explains what that costs in Grapevine and why it matters before the Christmas Capital rush hits.
Our crews serve Grapevine directly from our Dallas-Fort Worth scheduling office, and we know the 1985-1998 tract homes off Dove Loops, Hall-Johnson Road, and throughout the 76051 and 76092 zip codes the way a neighbor would. Call (980) 580-8641 and a live person answers. That part matters when you’re looking at a rust streak on your chimney chase in November.
Why Emberly Chimney Cleaners Is Grapevine’s Preferred Chimney Cap & Crown Company
Grapevine homeowners tend to ask for evidence before they agree to anything. We work the same way. Every visit includes an NFPA 211 Level 2 camera-scan inspection, and the photos are yours. Corrine Halstead built our inspection standard around that practice in 2009, and it became Clause 4 of the Haven Standard: a documented photo record on every job, not an optional add-on.
Our technicians are background-checked, uniformed, and named on the work order before they arrive. You get a text when we’re on the way. You get a written price, written scope, and written warranty before work starts. Not after. That’s Clause 1 of the Haven Standard, and we don’t deviate from it in Grapevine, Southlake, or anywhere else.
We’ve completed more than 38,000 chimney inspections and cleanings since 2009. In Grapevine specifically, much of that work lands on factory-built zero-clearance fireplaces hiding behind brick veneer, which is a different inspection protocol than a true masonry chimney. We flag that on the first visit. Most companies don’t pull the cap to find out.
Our Chimney Cap & Crown Services in Grapevine
Cap Installation
When a Grapevine home has no cap at all, or has one sized wrong for the flue, we install a properly fitted cap, usually our Chimney Cap & Crown team handling it same visit. Multi-flue caps and custom caps for odd chase dimensions are common on Grapevine’s 1990s prefab chases. A missing cap lets rain, leaves, birds, and embers straight down the flue, and a wrong-sized one creates draft problems you’ll notice as smoke rollback into the living room.
Cap Replacement
A typical cap replacement in Grapevine runs $275-$650 depending on flue diameter and material. We see rust-through at the corners of undersized chase covers more often in Grapevine’s 1985-1998 construction than in newer Tarrant County developments. Rain follows the rust into the chase and firebox, and hidden corrosion on the zero-clearance unit is already underway by the time you see a water stain on the ceiling below.
Crown Repair
Crown repair in Grapevine runs $350-$900 when the crown is cracked or the mortar wash has eroded but the underlying pour is still structurally sound. Lake Grapevine’s ambient humidity accelerates spalling on exterior chimney faces, so crowns here fail faster than in drier inland DFW suburbs. We cut out the damaged sections, re-pour or patch as needed, and slope the crown away from the flue tile so water actually drains instead of pooling into the smoke chamber.
Crown Coating
A flexible crown coating on a Grapevine chimney runs $600-$1,400 for a complete application, and it’s the right call when the crown has hairline cracking but no structural movement. We use Gelco coatings because they flex with the freeze-thaw cycles that North Texas clay expansion triggers. Here’s the honest part: coating buys time. It doesn’t fix a crown that has already separated from the flue tile due to footing shift. If the gap is there, coating alone won’t close it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Grapevine
We fabricate and install custom caps from Copperfield and source crown materials from Gelco, so when we quote a Grapevine job, the parts arrive without the three-week delay you sometimes get from out-of-state suppliers. For factory-built fireplaces, we work with Olympia Chimney’s spec sheets because Grapevine’s 1990s zero-clearance units often need manufacturer-specific terminations and chase covers that generic caps won’t properly fit. Faster parts means quicker scheduling for the Christmas Capital season.
Common Chimney Cap & Crown Problems We See in Grapevine Homes
- Rusted chase covers on prefab chases. Builders in 1985-1998 Tarrant County tract homes often used undersized steel chase covers. They rust through at the corners first, and that lets rain directly into the chase and firebox. By the time you see rust streaks, the zero-clearance unit below is already corroding.
- Cracked crowns from clay soil movement. North Texas clay lifts the chimney footing unevenly during drought-and-rain cycles. When the footing moves, the crown cracks at the flue tile gap. That’s a draft killer, and it lets water follow the flue liner into the smoke chamber.
- Spalling brick accelerated by Lake Grapevine humidity. The lake’s ambient moisture works into the mortar wash on exterior chimney faces. Freeze-thaw cycles pop brick faces loose. In Grapevine, we see this on the northwest-facing chimney faces most often, where the prevailing wind pushes moisture in.
- Missing or undersized caps on 1990s zero-clearance units. Many homeowners in Grapevine’s Silver Lake Estates and The Preserve neighborhoods don’t realize the brick on the outside is a veneer over a metal factory-built fireplace. The cap from the original install is often gone or sized wrong. Rain gets in. The firebox rusts. None of it is visible from the ground.
Pricing for Chimney Cap & Crown in Grapevine, TX
A full cap and crown overhaul in Grapevine, including cap replacement, crown repair, and coating, runs $1,000-$2,200 depending on chase height, flue configuration, and material choices. Cap replacement alone: $275-$650. Crown repair: $350-$900. Crown coating: $600-$1,400. Multi-flue caps and custom Copperfield fabrications add $200-$500. You’ll get the exact number in writing before we touch anything. No estimate is ever “call for a quote” from Emberly Chimney Cleaners We name the price, you say yes or no. And if you bring us a competitor’s written estimate, we’ll give you a free second opinion on it.
Call (980) 580-8641 for your exact Grapevine quote. Estimates are free.
We Also Serve Cities Near Grapevine
Our Chimney Cap & Crown in Grapevine crews routinely run the same route south to Southlake, west to Colleyville, east to Euless, and north to Coppell. If you’re in any of those cities and facing a cracked crown or rusted chase cover, the process is identical: written price first, camera-scan evidence included, and a documented photo record when we’re done.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Grapevine
Because the brick you see from your Grapevine lawn is often just a veneer over a factory-built zero-clearance metal firebox, and the cap or chase cover above it can rust through without a single visible clue from the ground. A common builder shortcut in 1985-1998 Tarrant County tract homes was undersized steel chase covers. Rust starts at the corners, rain gets into the chase, and the metal firebox below corrodes quietly until a water stain shows up on the ceiling below. The fix early is a $275-$650 cap replacement. The fix late is a full firebox replacement. Call (980) 580-8641 for a camera-scan inspection, and we’ll show you the photos.
Because the crown above your flue tile is the chimney’s roof, and when it cracks, water follows the flue liner into the smoke chamber where sweeping alone can’t fix it. In Grapevine, North Texas clay soil expands and contracts through drought-and-rain cycles, which lifts the footing unevenly and opens a gap between the crown and flue tile. That gap kills the draft and lets water in. A sweep cleans the inside. It doesn’t address the open crack letting water back in the day after we leave. We quote the cap and crown repair separately and in writing, with photos showing exactly what’s cracked.
It concentrates Grapevine’s chimney repair calls into late fall, because hundreds of thousands of visitors and a culture of holiday fires means homeowners book their first December fire and only then discover last year’s drought-and-rain cycle cracked the crown or rusted the chase cover. The predictable fall rush means scheduling a cap and crown inspection in September or October beats fighting for a November slot. If you’re already in the rush, call (980) 580-8641 and we’ll get you on the board with a written price before the holidays.
A flexible Gelco coating on a cracked, spalling crown in Grapevine costs $600-$1,400 and fixes surface cracking and minor mortar wash erosion, but it will not fix a crown that has separated from the flue tile or moved with the footing. Grapevine’s Lake Grapevine humidity accelerates spalling, and if the brick faces are popping loose across a large area, coating buys time at best. We’ll tell you plainly which case you have, with photos of the crown from above and readings from the camera scan, and quote the rebuild only if the evidence says it’s necessary. Call (980) 580-8641 for an exact quote.
Yes. The chase cover is the metal lid on top of the wooden or metal chase, and it needs its own cap to prevent rain from entering the flue opening and to prevent animal entry into the firebox. In Grapevine’s 1980s-1990s factory-built homes, undersized chase covers were common, and many have rusted through at the corners. The cap is not redundant. It works with the chase cover, and when either fails, the firebox below takes water damage. We check both on every inspection and quote them separately in writing.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Grapevine under the Haven Standard.