Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Weston
Chimney cap replacement in Weston typically runs $285-$640 for a standard galvanized or stainless unit, and crown repair or recoating runs $195-$475 for a typical single-flue prefab or masonry chimney. Those are the numbers we quote in writing before anyone starts, and they include the camera inspection and photo record every visit. Weston’s planned-community homes, built mostly between the early 1990s and mid-2000s, now have chimney components hitting the 20-30 year mark, and in this climate that means rust, moisture intrusion, and wildlife access far more often than it means soot. If you’re seeing rust stains, moisture near the firebox, or that you simply haven’t looked at your chimney cap since you bought the house, call (980) 580-8641 and we’ll schedule a time that works around your life in Weston.
Why Emberly Chimney Cleaners Is Weston’s Preferred Chimney Cap & Crown Company
We work in Weston every week, and the homes in Windmill Ranch Estates, The Ridges, and the gated communities along Bonaventure Boulevard and Saddle Club Road present a very specific set of cap and crown problems. This isn’t a market where chimneys burn wood through a winter. These are decorative fireplaces and factory-built metal inserts that sit idle for most of the year, so the failures we see have everything to do with Broward County humidity, heavy seasonal rain, and the way moisture behaves when it gets past a cracked crown or a missing cap.
Our Chimney Cap & Crown team includes technicians who know the difference between a prefab metal chimney built in 1998 and a full masonry chimney built in the same year. That matters more than it sounds like it should. Code-compliant repairs on a 25-year-old prefab unit often require brand-specific components, and we stock DuraFlex and Olympia Chimney parts so we’re not asking a Weston homeowner to wait two weeks on a special order.
Every visit includes what we have always included, and what Clause 4 of the Haven Standard requires: a documented photo record. When we tell you your chimney crown is corroded, you’ll see it. When we recommend a custom cap for a flue that’s been open to the Everglades buffer, you’ll see the evidence for that recommendation before anyone asks you for a dollar. Corrine Halstead established this standard because far too many homeowners in Florida have been told their chimney needs thousands of dollars in work based on nothing they can verify. Corrine runs the company on a simple principle: if you can’t show the customer, it didn’t happen.
Our Chimney Cap & Crown Services in Weston
Cap Replacement
Most cap replacements in Weston we perform are on flues that haven’t seen a fire in years. The cap rusted through, or it blew off in a tropical system, or it was never replaced after the last technician looked at it. We remove the old cap, measure the flue exactly, and install a correctly sized replacement, usually a Copperfield or Famco unit, with the correct screen mesh to keep embers in and wildlife out. Replacement runs $285-$640 depending on flue size, material, and whether it’s a single-flue or multi-flue setup.
Crown Coating
A chimney crown is the concrete or metal slab on top of the chimney around the flue. For Weston’s prefab metal chimneys, the “crown” is often a metal top plate that corrodes from constant 80%+ humidity and no heat to bake the moisture out. We apply a Gelco crown coating to seal hairline cracks and prevent water from wicking down into the flue liner, which is what causes those interior wall stains near the firebox that homeowners keep trying to scrub off. Coating runs $195-$330 for a typical single-flue chimney.
Crown Repair
When the damage goes beyond hairline cracks into visible spalling or rust-through, a coating won’t hold. We repair the crown properly: rust abatement on metal crowns, concrete patching and re-sloping on masonry, and re-caulking at the flue tile. This is the repair that stops the “small” leak from becoming a liner replacement. Crown repair in Weston runs $310-$475, and we’ll show you photos of exactly where the water has been getting in.
Custom Cap
Weston’s far-west communities back up against the Everglades Conservation Area buffer, and that adjacency brings a specific problem: wildlife that views an uncapped flue as ideal nesting. Barn owls, chimney swifts (which are federally protected once they nest), and raccoons all push in. A custom cap, sized and screened specifically for your flue configuration, is the correct fix, and we build them to order. Custom cap pricing starts around $420 for most Weston single-flue applications.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Weston
We install and service components from Famco, Copperfield, DuraFlex, and HeatShield, selected through Haven’s buying network to keep our Weston pricing honest. What that means for you: if your 1990s prefab fireplace needs a brand-specific replacement part, we already carry it or can source it quickly, because we’re not guessing which components Weston’s home builders used. We see the same handful of prefab models across Windmill Ranch Estates and The Ridges, and we know from experience which parts fail at year 20 and which ones hold.
Common Chimney Cap & Crown Problems We See in Weston Homes
- Rust-through on prefab metal crowns from disuse and humidity. Weston’s combination of year-round high humidity and almost zero heat cycling means moisture never gets baked out of the system. The metal top plate slowly corrodes, then water wicks into the flue liner and stains the wall near the firebox.
- Cracked or missing caps on rarely-used fireplaces. If a fireplace hasn’t been opened in years, no one notices the cap is gone. We find barn owl nesting material packed down the flue liner in homes where the homeowner called about a smell they couldn’t identify.
- Flashing corrosion at the roofline from heavy seasonal rain. Weston gets strong seasonal rainfall, and failed flashing lets water pool behind the chimney crown. Homeowners often mistake the resulting interior mold smell for “soot buildup” and schedule a cleaning when they actually need crown and flashing work.
- Chimney swift nesting in open flues. Swifts are federally protected once they begin nesting, which means if a bird has already laid eggs, the cleanup and exclusion work legally has to wait. A properly screened cap installed before nesting season prevents this entirely.
Pricing for Chimney Cap & Crown in Weston, FL
Most Weston homeowners pay between $195 and $640 for cap and crown work, depending on scope. A crown coating for a single prefab flue runs $195-$330. A standard cap replacement runs $285-$640. Crown repair with rust abatement or concrete patching runs $310-$475. A custom-built cap for a multi-flue or unusual flue configuration starts around $420. Larger properties in The Ridges with multiple fireplaces and multiple flues will pay more, because there are simply more chimneys to address, and we quote those on a per-flue basis, always in writing before work starts. If you want an exact number for your home, call (980) 580-8641. We’ll come to Weston, put a camera down the flue, and hand you a written scope and written price. Clause 1 of the Haven Standard: never pay for work you haven’t seen priced on paper.
We Also Serve Cities Near Weston
In addition to our regular route through Weston and the western Broward County communities, we serve the broader Florida market from Jacksonville to Miami, including Tampa and Orlando. If you own property elsewhere in the state or have family who need chimney work done, our Chimney Cap & Crown in Weston team can coordinate service through the same Haven Standard inspection and pricing process. Dispatch and scheduling are coordinated from our South FL office, so Weston crews and scheduling run locally.
Serving Weston, FL - Our Local Coverage Area
We’re based in the Weston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Weston
Your cap is exposed to Weston weather 365 days a year even when the fireplace never lights. Over 20 to 30 years, rain, 80%+ humidity, and salt-adjacent air corrode the cap and crown, which lets water into the flue liner and creates the mold and interior wall stains you might have noticed near the firebox. The fix is replacement, and the evidence is on the camera footage we show you. Call (980) 580-8641 for a precise written quote for your flue.
Yes. Prefab metal chimneys have a metal top plate that functions as the crown, and it corrodes faster in Weston’s climate than masonry ever would. A Gelco crown coating seals hairline cracks and buys years before replacement is needed, but it must be applied to a rust-stabilized surface. If the plate has already rusted through, coating won’t hold and we’ll tell you that plainly and show you why.
A custom cap with the correct screen mesh will keep chimney swifts, barn owls, and raccoons out of the flue during nesting season, and it’s the only legal way to prevent nesting. If a swift has already laid eggs, federal law protects the nest until the young fledge, and no legal wildlife exclusion can happen before then. The time to install a screened custom cap is before the birds arrive. Call (980) 580-8641 and we’ll schedule before nesting season starts.
A masonry crown is a concrete slab poured around the flue tile; when it fails, you see spalling, cracking, and chunks missing, and the repair is concrete patching and re-sloping. A prefab crown is a factory metal plate; when it fails, you see rust-through, and the repair is rust abatement followed by coating or plate replacement. We carry brand-specific parts for Weston’s prefab models, which means we can usually repair same-day rather than special-ordering.
Annual inspection is our recommendation for any Weston home, and it matters more when you have multiple fireplaces because the ones you rarely use are the ones where failures go unnoticed. Larger properties in The Ridges often have two or three flues, and we quote the inspection and any cap and crown repair on a per-flue basis, all in writing. The camera scan and photo record are included on every visit, which is what Clause 4 of the Haven Standard requires, and what you should expect from any company you let on your roof.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners