Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Tampa
Chimney caps and crowns in Tampa fail faster than almost anywhere in Florida, and the reason is simple: salt air from Tampa Bay eats galvanized steel within five to seven years, even on fireplaces that never get lit. A corroded cap leaves your flue open to rain, chimney swifts, paper wasps, and humid air that rusts dampers shut. We replace and coat caps and crowns across Tampa with stainless steel and copper components built for this climate. Call (980) 580-8641 for a written price before any work starts.
Why Emberly Chimney Cleaners Is Tampa’s Preferred Chimney Cap & Crown Company
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and Tampa’s coastal housing stock keeps us busy in a very specific way. Homeowners in Tampa rarely call us about creosote buildup. They call because a cap rusted through, a crown is spalling, or a damper seized from humidity. Our Chimney Cap & Crown team works on 1920s brick bungalows in Seminole Heights, 1950s ranches in South Tampa, and everything in between. Every visit includes a camera-scan inspection under NFPA 211 Level 2 and a documented photo record you keep. That’s Clause 4 of the Haven Standard, and we’ve done it that way since 2009.
Corrine Halstead leads our Tampa crews, and she insists on one thing above all: written pricing before work begins. Not a verbal ballpark. A written scope, written price, written warranty, handed to you before a single tool comes off the truck. Tampa homeowners tell us they’re tired of technicians who quote one number on the phone and another after the ladder goes up. That doesn’t happen here. If a competitor has already quoted you a cap or crown job in writing, bring it in. We offer a free second opinion on any written estimate.
Our Chimney Cap & Crown Services in Tampa
Cap Replacement
Salt air is unforgiving to galvanized caps. We see original caps on Tampa homes rusted through at the seams in as little as five years. We replace them with stainless steel or copper caps from Olympia Chimney and Copperfield, which withstand Tampa’s marine environment without the accelerated corrosion that plagues galvanized hardware. A replaced cap should be considered standard maintenance on any chimney within a few miles of the Bay, not an optional upgrade.
Crown Coating
Tampa’s wet season delivers about 30 of the city’s 46 annual inches of rain in daily downpours between June and September. Mortar crowns absorb that moisture, and the humidity cycling causes spalling, hairline cracks, and eventual water intrusion into the chimney chase. We apply Gelco crown coating after repairing the existing mortar, sealing the crown against further water penetration. This is the single most common preventive repair we recommend in Tampa, and it’s one of the few that pays for itself within two wet seasons.
Custom Cap
Older Tampa homes don’t always have standard flue dimensions. A 1930s bungalow in Hyde Park might have a clay tile flue that measures oddly, and a prefabricated zero-clearance fireplace in a 1980s South Tampa home presents a completely different profile. We fabricate custom caps to fit exactly what’s on your roof, including multi-flue caps for homes with side-by-side flues. If you need a custom solution, we measure, build, and install it with the same written price guarantee we apply to every other job.
Multi-Flue Cap
Homes with fireplaces on two floors, or a fireplace and a separate furnace flue, often have two or three flues exiting under one crown. A single multi-flue cap covers all of them, preventing rain and wildlife from entering while allowing proper draft. We stock multi-flue options and install them frequently in Tampa’s older bungalow neighborhoods where chimneys were built before modern building codes standardized flue sizing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Tampa
We use DuraFlex, Olympia Chimney, Gelco, and Copperfield components on Tampa cap and crown work. DuraFlex liners and Olympia caps hold up in salt air, and Gelco crown coating is designed for exactly the kind of humidity cycling Tampa gets every summer. Because we procure through Haven’s buying network, we pass the material savings to you in the written quote. No markup padding on parts.
Common Chimney Cap & Crown Problems We See in Tampa Homes
- Salt-air rust on galvanized caps. Within five to seven years, a galvanized cap near Tampa Bay corrodes at the seams and edges. Once the cap fails, rain and birds get in, and the problem compounds quickly.
- Crown spalling from wet-season downpours. Intense daily rain in summer, followed by near-100% humidity, causes the mortar crown to crack and flake. Water then moves into the chimney chase and rusts the damper beyond repair.
- Uncapped flues attracting chimney swifts and wasps. Tampa’s fireplaces sit idle eight to nine months a year. That’s long enough for chimney swifts, a federally protected species under the Migratory Bird Treaty Act, or paper wasps to colonize the flue. Their nesting materials block draft and become a fire hazard when the first cold front hits in December.
- Dampers rusted shut by humid air. Even a chimney that never gets lit accumulates moisture in Tampa’s climate. By the time a homeowner tries the fireplace in January, the damper may be seized, and the smoke has nowhere to go but back into the living room.
Pricing for Chimney Cap & Crown in Tampa, FL
A standard stainless steel cap replacement in Tampa typically runs $340-$560, including removal of the old cap and installation of the new one. Custom caps and multi-flue caps run higher, generally $620-$1,100 depending on flue count and access. Crown coating, which includes repairing spalled mortar and applying a Gelco sealant, runs $450-$850 for most residential chimneys. If the crown is badly deteriorated and requires full rebuilding, expect $900-$1,600. These are Tampa market prices based on our written quotes. Every job gets a written price before work starts, and you get a documented photo record when it’s done. Call (980) 580-8641 for a free estimate.
We Also Serve Cities Near Tampa
Our Tampa crews also cover Clearwater, Dunedin, Pinellas Park, and Tarpon Springs. If you’re within 30 minutes of Tampa Bay, we can usually schedule your cap or crown inspection within a few days. Salt air doesn’t stop at the city line, and neither do we.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Tampa
Yes, and faster than most homeowners expect. A galvanized cap within two to three miles of the Bay typically lasts five to seven years before the seams and edges start to rust through. Stainless steel and copper caps hold up far better in Tampa’s marine environment. If you can see rust streaks on your cap from the ground, it’s already failing. Call (980) 580-8641 and we’ll confirm it with a camera inspection.
Every two years, even if you never use the fireplace. Tampa’s wet season and high humidity cause mortar crowns to spall and crack regardless of use, and those cracks let water into the chimney chase. A crown inspection is part of every Level 2 camera scan we do, and the photo record shows you exactly what we saw.
A properly sized stainless steel cap with side screens will keep chimney swifts and paper wasps out. The key is proper sizing and side mesh spacing. A cap that’s too small or has no side screens leaves gaps. We measure the flue, install a cap that fits, and document it with photos so you know the opening is covered. This is a common fix for Tampa homeowners who discover bird activity in December.
Repointing removes deteriorated mortar and replaces it with fresh mortar to rebuild structural integrity. Coating applies a flexible sealant over the repaired crown to prevent water absorption. In Tampa, we usually do both: repoint the spalled areas, then coat with Gelco. Coating alone won’t fix a crown that’s already falling apart.
Because rust isn’t caused by heat. It’s caused by moisture, and Tampa’s humidity and salt air provide that moisture year-round, even on an idle fireplace. Galvanized steel oxidizes in a marine environment whether or not you light a fire. Switching to stainless or copper is the only practical fix. The good news: a 365-Day Done Right Promise backs every cap we install in Tampa. If it’s not done right, we make it right.
Get Your Chimney Cap & Crown Inspected in Tampa
If you’re seeing rust on your cap, cracks in your crown, or you heard something moving in the flue, don’t wait for the first cold front. Tampa’s fireplace season is short, and the problems happen fast when it arrives. We’ll come out, run a camera down the flue, show you the photos, and hand you a written price. No pressure, no mystery, no verbal-only quote. That’s how we’ve worked since 2009, and it’s how Corrine Halstead runs every job in Tampa. Call (980) 580-8641 to schedule your inspection.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Tampa with camera-documented chimney inspections since 2009.
Chimney Cap & Crown in Nearby Areas
