Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Westchester
Chimney cap and crown work in Westchester runs $185-$640 for most homes, and here’s what makes this market different: the failure mode isn’t creosote, it’s salt air eating galvanized steel and damp masonry cracking through Miami-Dade’s wet-dry cycle. If you’re in a CBS home near Coral Way, Bird Road, or along SW 8th Street, you’re dealing with a chimney that’s been dormant for decades and is quietly deteriorating from humidity, not use. Our crews serve Westchester from our South FL dispatch office, and every visit includes a camera-scan inspection with a photo record you can see before any repair is recommended. Call (980) 580-8641 to schedule.
Why Emberly Chimney Cleaners Is Westchester’s Preferred Chimney Cap & Crown Company
Since 2009, we’ve inspected and cleaned more than 38,000 chimneys, and the Westchester calls we take have a pattern: the fireplace hasn’t been lit in years, the cap looks rusted from the street, and nobody wants to spend money on something they can’t verify. That’s exactly why we started doing camera-down-the-flue documentation as our default practice long before anyone asked for it. Clause 4 of the Haven Standard requires a photo record on every job, and in Westchester that record usually shows what the homeowner suspected: corrosion, cracked crowns, and occasionally an iguana that found its way in.
Our techs are background-checked and uniformed, and you get a written price before any work starts, never after the fact. Corrine Halstead, our owner, built the company around one rule: show the homeowner what we found before we ask for a dollar. It’s why Westchester homeowners who read the three-star reviews of other companies end up calling us. You’ll speak to a live person 24/7, not a web form.
Our Chimney Cap & Crown Services in Westchester
Cap Installation
If your Westchester flue has never had a cap, or if the original cap is gone entirely, we install new caps sized to your actual flue dimensions, not a universal fit. On CBS homes built in the 1950s through 1970s, original caps were often thin galvanized steel never meant for salt air. We install stainless steel and copper caps from Famco and Copperfield that hold up in coastal humidity. Every cap installation includes mesh sized correctly for South Florida wildlife pressure, which matters more here than anywhere else we work.
Cap Replacement
Stock galvanized caps in Westchester corrode through in five to seven years, and a rusted-through cap is an open door for rain, leaves, and iguanas. We inspect the cap under the camera, document the corrosion points, and replace with material rated for salt-laden air. A new cap in Westchester typically runs $185-$395 installed, depending on flue size and whether you need a single-flue or multi-flue configuration. We show you the old cap beside the new one before we leave.
Crown Repair
Concrete crowns on 1950s-70s Westchester chimneys crack from the wet-dry humidity cycle, and once the crown edge spalls, water soaks into the masonry below. We rebuild crowns with a proper overhang and drip edge, then apply waterproof coating rated for Miami-Dade’s rainfall. Crown repair on a Westchester CBS home typically runs $350-$640 when the damage is caught before it moves into the flue liner. We show you the cracked crown on camera before we touch it.
Crown Coating
A crown that’s still structurally sound but showing hairline cracks gets a CrownCoat sealant from Gelco. In Westchester, where the rainy season saturates chimney masonry for months, a sealed crown is the difference between a chimney that lasts another 20 years and one that needs a rebuild in five. Coating alone is the most affordable service we offer in Westchester, typically $225-$385. We document before and after with photos.
Multi-Flue Cap
Homes in Westchester with more than one flue, say a fireplace and a furnace vent sharing a single chimney chase, need a multi-flue cap that covers the entire crown surface. We build these custom to your chase dimensions. In Westchester’s climate, multi-flue caps also need to account for sudden cold snaps when wildlife seeks warmth. A custom-mesh multi-flue cap in Westchester runs $420-$680. We show you exactly where the old cap failed on camera first.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Westchester
We install and service caps from Famco and Copperfield, and we keep the most common Westchester sizes stocked locally so we’re not waiting on a distributor any longer than necessary. When a liner issue comes up, we source materials from DuraFlex and HeatShield. The point of stocking these brands isn’t brand loyalty; it’s honesty. A Famco cap on a Westchester flue does the same job as anything else, but these are the materials we’ve documented holding up in South Florida’s conditions for years. We’re glad to show you the difference on camera.
Common Chimney Cap & Crown Problems We See in Westchester Homes
- Salt-air cap corrosion: Galvanized steel caps on Westchester chimneys rust through at the seams in five to seven years because the nearby Atlantic air carries enough salt to eat unprotected steel. Once the cap perforates, rain gets in and the flue becomes a humid box.
- Spalling concrete crowns: Homes built between the 1950s and 1970s in Westchester have concrete crowns that swell and shrink with the wet-dry seasonal cycle, cracking along the edges and letting water migrate into the masonry. Most of these chimneys were decorative from day one and have never been sealed.
- Iguana intrusion: During South Florida’s rare cold snaps, green iguanas seek warmth near structures and have been documented nesting in dormant chimney flues in Miami-Dade. A cap with widened or damaged mesh is an invitation. This is a scenario no inland sweep would think to check for, and it’s routine for our Westchester techs.
- Mold inside unused flues: When a damp flue sits sealed behind a closed damper in Miami-Dade humidity for months, mold grows inside and can migrate into the home’s interior wall cavities. The cap and crown are the first line of defense, and if they fail, you don’t see the mold until it’s already a problem.
Pricing for Chimney Cap & Crown in Westchester, FL
A straightforward cap replacement in Westchester runs $185-$395. Crown coating runs $225-$385. Crown repair with rebuild runs $350-$640. A custom multi-flue cap runs $420-$680. What pushes you toward the high end of any range is flue size, chase condition, and whether we find damage during the camera scan that changes the scope. After our camera inspection, you get a written price with the scope and warranty included, before any work starts. That’s Haven Standard Clause 1: H.A.V.E.N. ‘Have it in writing.’ We never charge you to come out for an estimate. Call (980) 580-8641 for an exact quote. Free Second Opinion on any written estimate is always available.
We Also Serve Cities Near Westchester
Our crews cover Westchester and the surrounding metro, including Miami, Jacksonville, Tampa, and Orlando. If you’re in Westchester or anywhere nearby and need a Chimney Cap & Crown inspection, you’ll get the same camera-scan documentation and written pricing we’ve provided since 2009. See our Chimney Cap & Crown in Westchester service area for details on neighborhoods like Coral Way, Olympia Heights, and Fontainebleau.
Serving Westchester, FL - Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Westchester
Salt-laden air from the nearby Atlantic coast accelerates corrosion on galvanized steel, often eating through stock caps in five to seven years, which is two to three times faster than inland markets. The fix is a stainless steel or copper cap, and we show you the failed cap on camera before we replace it. Call (980) 580-8641 and we’ll schedule a camera scan to see exactly what’s left of yours.
Yes, if the cap’s mesh is damaged, widened, or missing entirely. During South Florida’s brief cold snaps, green iguanas seek warm, enclosed spaces, and in Westchester dormant flues are among the most common entry points we document. On a 1960s CBS home near Coral Way, our tech found a corroded Famco cap and a spalling concrete crown with an iguana nest in the flue. We replaced the cap, rebuilt the crown, and fitted a custom-mesh multi-flue cap. If you want us to check whether your current cap is keeping wildlife out, call (980) 580-8641.
Yes, in Westchester more than anywhere, because an unused fireplace doesn’t mean a dry chimney. It means a dark, humid, sealed cavity that’s attracting mold, rust, and wildlife. An annual camera scan takes under an hour and gives you a photo record proving whether the cap and crown are still doing their job. It’s far cheaper than repairing water damage after the fact.
You’ll see white chalky residue called efflorescence on the exterior chimney surface, spalling concrete along the crown edge, and often water stains on the ceiling near the chimney chase inside the house. On CBS construction, water that penetrates the crown often travels through the concrete block and shows up inside as damp drywall or peeling paint. We document all of this with camera photos so you can see what we see.
Yes. We remove the old cap, document the condition of the flue beneath it with the camera, then build a custom-fitted replacement. If the flue itself is intact and only the mesh is clogged or corroded, a replacement cap is all you need. If the old cap’s failure allowed water or wildlife into the flue, we’ll show you that too and quote the repair in writing before any work begins.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Westchester with camera-scan inspections and written pricing since 2009.
Ready to get your Westchester chimney cap and crown inspected? Call (980) 580-8641 for a free estimate, and we’ll show you exactly what we find, on camera, before you pay a dollar.