Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Town ‘n’ Country
Chimney cap and crown work in Town ‘n’ Country usually costs $340-$1,100 depending on whether you need a simple cap replacement, a multi-flue setup, or rust repair on the metal chase cover. Most jobs are completed in a single visit. If you live off Hillsborough Avenue, Memorial Highway, or anywhere in the 33615 and 33634 zip codes, call (980) 580-8641 and we’ll give you a written price before any work starts.
We know the houses here. The 1960s through 1980s concrete-block ranches and split-levels that define Town ‘n’ Country were built with prefabricated fireplaces, not masonry chimneys. That changes what actually fails. We’ll get into that below, but the short version is this: if your cap is rusted or your crown is leaking, the problem is almost always the galvanized chase cover on a metal flue, not the poured concrete crown you’d find on a brick chimney. Chimney Cap & Crown work in Town ‘n’ Country starts with identifying which one you have.
We’re the team at Emberly Chimney Cleaners, and we serve Town ‘n’ Country with camera-documented inspections on every job. Call (980) 580-8641 for a free estimate. A real person answers, day or night.
Why Emberly Chimney Cleaners Is Town ‘n’ Country’s Preferred Chimney Cap & Crown Company
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and a meaningful portion of those were in Hillsborough County tract homes just like yours. The pattern is consistent: the fireplace barely gets used, the cap rots anyway, and water ends up where it shouldn’t. We don’t tell you to fix things you can’t see. Every visit includes a camera scan down the flue and a photo record you keep. That’s Clause 4 of the Haven Standard, and it’s been our default since the company started.
Corrine Halstead leads our team, and the standard Corrine set from day one is simple: written price before work, written warranty after, and nobody walks into your home without a background check and a uniform. You’ll know who’s coming. You’ll get a text when they’re on the way. And you’ll get photos of exactly what we found inside your flue before you agree to spend a dollar.
Our 365-Day Done Right Promise applies to every cap and crown job in Town ‘n’ Country. If it’s not right, we return and make it right. No arguments, no re-quote. We also offer a Free Second Opinion on any written estimate from another company. Bring us the quote, and we’ll tell you honestly whether the work is needed, overpriced, or missing scope.
Our Chimney Cap & Crown Services in Town ‘n’ Country
Here’s what we do most often in Town ‘n’ Country, and what it means for the specific housing stock around Webb Road, Countryway Boulevard, and the neighborhoods off Sheldon Road.
Cap Installation
For Town ‘n’ Country homes with a masonry chimney (they exist, mostly on newer additions or custom builds), we install stainless steel caps from Olympia Chimney or Copperfield. A standard single-flue cap runs $340-$520 installed. This includes removing the old cap if one exists, evaluating the flue tile, and securing the new cap with a mechanical fastener, not just caulk. The cap keeps rain, raccoons, and chimney swifts out of the flue.
Cap Replacement
This is the most common cap job we do in Town ‘n’ Country, and it’s where the prefab housing stock really shows its hand. Factory-built fireplaces from the 60s through 80s often came with cheap galvanized caps and chase covers. After decades of Hillsborough County humidity, those caps rust through. A replacement cap, properly sized to the metal flue pipe, runs $380-$650 installed. If the chase cover itself is compromised (rust holes, pitting, standing water), that’s a separate repair we’ll show you on camera.
Crown Repair
Here’s the thing most homeowners miss: on a prefab metal fireplace, there is no masonry crown to repair. The chase cover serves that function. We see a lot of Town ‘n’ Country homeowners told they need a crown repair when what they actually need is a new galvanized or stainless chase pan, coated to resist the constant ambient moisture. If you do have a poured concrete crown (some masonry chimneys in the area do, particularly on custom homes), we repair cracks, fill spalling, and recoat with Gelco sealant. Crown repair or chase cover replacement in Town ‘n’ Country typically runs $450-$950 depending on access and size.
Crown Coating
When the crown or chase pan is structurally sound but starting to show surface rust or minor pitting, a coating is the right call. We apply Gelco or HeatShield coatings, both of which are formulated for Florida’s salt-adjacent, humidity-heavy air. Coating runs $280-$480. We’ll tell you plainly if a coating will buy you five years or if replacement is the smarter money. Usually we can show you why on the camera feed.
Multi-Flue Cap and Custom Cap
Some Town ‘n’ Country homes, especially split-levels with a boiler flue alongside the fireplace flue, need a multi-flue cap. These run $520-$850 installed, depending on the chase dimensions. If you’ve got an odd-sized chase or want a specific screen mesh to keep out the chimney swifts that arrive every April, we can order a custom cap from Copperfield. Custom orders add about a week to the timeline but fit exactly. No gaps, no birds, no rusted corners.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Town ‘n’ Country
We stock parts from Copperfield and Olympia Chimney for cap work, and we use Gelco and HeatShield coatings for crowns and chase pans. When we need to order a custom piece, our buying arrangement through Haven’s network keeps the price from inflating the way you’ll see with one-off supply house orders. That matters in Town ‘n’ Country, where the prefab units often need uncommon cap sizes that generic suppliers just don’t stock. We do the legwork, and the price is on your written estimate before work begins.
Common Chimney Cap & Crown Problems We See in Town ‘n’ Country Homes
- Rusted galvanized chase covers on 1960s-80s prefab fireplaces. The fireplace sits idle 300+ days a year in humid air. The galvanized steel chase cover quietly rusts from the inside out. By the time you see rust streaks on the ceiling near the firebox, the cover has already failed and rain has been getting in.
- Chimney swift nesting in uncapped or damaged flues. These federally protected birds arrive in Tampa Bay around April and stay through September. If swifts are nesting in your flue, federal law prevents us from disturbing the nest. A cap job in late spring can get pushed to fall unless the cap was already in decent shape and only the exterior flashing needs attention.
- Clogged mesh caps from wind-blown debris and mildew. Fine mesh screens that came with the original prefab unit clog with oak pollen, pine needles, and mildew during the wet off-season. When you finally light a fire in December, the draft is terrible. The cap is doing its job keeping birds out, but the mesh needs cleaning or replacement.
- Warped dampers from storm water pouring through a failed cap. Open or broken caps funnel summer thunderstorms directly into the firebox. Cast-iron dampers warp. We’ve replaced dampers, fireboxes, and in one case a whole prefab chase assembly because a $350 cap replacement was deferred for five years.
We replaced a corroded chase cover and cap on a 1972 concrete-block ranch off Webb Road. The original single-flue cap had rusted clean through. Chimney swifts had nested inside that spring. The summer storms then warped the damper. Our tech installed a stainless multi-flue cap and coated the chase pan with Gelco sealant, then re-screened the flue to keep birds out. The homeowner’s occasional wood fires now draft properly for the first time in years.
Pricing for Chimney Cap & Crown in Town ‘n’ Country, FL
| Service | Typical Range |
|---|---|
| Cap installation (single flue) | $340-$520 |
| Cap replacement (prefab metal unit) | $380-$650 |
| Crown repair or chase cover replacement | $450-$950 |
| Crown or chase pan coating | $280-$480 |
| Multi-flue cap or custom cap | $520-$850+ |
What affects the price in Town ‘n’ Country? Chase height and roof pitch, how corroded the existing mounting surface is, and whether the flue is single or multi-unit. If we recommend a chimney sweep alongside the cap work because we found heavy creosote or a blockage, that adds $180-$260. You always get a written price before we touch anything. The estimate is free, and calling (980) 580-8641 costs you nothing but five minutes.
We Also Serve Cities Near Town ‘n’ Country
Most of our Town ‘n’ Country work comes from neighborhoods around the 33615 and 33634 zip codes, but we regularly send crews to Tampa, Miami, Orlando, and Jacksonville for cap, crown, and full chimney replacements. If you’re in one of those cities, the same written-price standard applies. Call (980) 580-8641 and mention your city for scheduling.
Serving Town ‘n’ Country, FL - Our Local Coverage Area
We’re based in the Town ‘n’ Country area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Town ‘n’ Country
Because the cap is galvanized steel, and your fireplace sits unused in Hillsborough County’s humidity for 330+ days a year. Galvanized coatings break down from ambient moisture, not from fire. Rust starts at the seams and fasteners. Once pinholes form, every summer storm sends water into the flue. A stainless replacement cap can last decades. Call (980) 580-8641 for a written estimate if your cap is rusting.
No. If the birds are chimney swifts, which are the dominant nesting species in Tampa Bay, they’re federally protected under the Migratory Bird Treaty Act. From roughly April through September, neither you nor we can legally disturb an active nest. If chimney swifts have taken over a damaged cap in Town ‘n’ Country, the replacement waits until the fledglings leave. A properly installed cap with correct mesh prevents this next spring. Get the cap on in fall, before they return. Call (980) 580-8641 to schedule.
A crown repair means filling cracks or rebuilding the top surface. A coating means sealing the existing surface before those cracks get worse. For most Town ‘n’ Country prefab fireplaces, “crown” means the metal chase cover, so coating is only right if the metal is structurally sound with minor rust. We’ll show you the condition on camera and tell you honestly which applies. The price difference is typically $200-$400. Call (980) 580-8641 and mention you need a chase pan or crown evaluation.
Annually is ideal, and it doesn’t cost extra when you combine it with a standard sweep. In Town ‘n’ Country, the failure mode is rust and water infiltration, which happen regardless of use. The cap and chase cover are the first line of defense. If you skip five annual inspections, you’re budgeting for a much larger repair. A level-two inspection with a camera runs $180-$290. That’s cheap compared to a rotted chase assembly replacement. Call (980) 580-8641 to book.
Yes, usually. The musty odor comes from moisture trapped inside the flue and firebox. A properly fitted, correctly screened cap stops rain and storm water from entering, which is the main source of that moisture. In some cases, the flue liner itself has absorbed years of humidity and needs cleaning before the smell fully clears. But the cap is the starting point. Call (980) 580-8641 for an exact quote, and we’ll camera-scan the flue before recommending anything.
Call Emberly Chimney Cleaners for Chimney Cap & Crown in Town ‘n’ Country
If you need a cap replacement, a chase cover inspection, or you’re tired of water in the firebox every time it storms, we’re ready. Corrine Halstead and the Emberly team serve all of Town ‘n’ Country with written pricing, camera documentation, and a 365-Day Done Right Promise on every job. Call (980) 580-8641 now. A live person answers 24/7, and your estimate is free.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Town ‘n’ Country under the Haven Standard since 2009.
Chimney Cap & Crown in Nearby Areas