Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Lebanon
A chimney cap and crown in Lebanon typically costs between $225 and $640 for most homes, depending on whether you need a simple cap installation or a full crown rebuild with custom flashing. We serve the entire Lebanon area, from the historic neighborhoods around the public square to the post-2010 subdivisions off Highway 109, and we schedule most cap and crown work within 5 to 7 days. If water is getting into your flue or you can see cracks spreading across your crown, call (980) 580-8641 and we’ll walk you through what to look for before we even book the visit.
Lebanon’s mix of 200-year-old masonry and newer prefab construction means cap and crown work here rarely looks like it does in Mount Juliet or Hendersonville. The older homes near the square have chimneys that were built for coal and converted to wood burning without relining. The newer homes along the Highway 109 corridor have factory-built units with model-specific caps that manufacturers have sometimes discontinued. Knowing which one you’re dealing with before anyone climbs onto the roof is the difference between a $300 repair and a $3,000 one. That’s why we send a camera down the flue on every single visit, before we recommend anything.
Why Emberly Chimney Cleaners Is Lebanon’s Preferred Chimney Cap & Crown Company
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and every one of those jobs was quoted in writing before work started. That number matters in Lebanon because this city’s housing stock is split so sharply between pre-1920s masonry and post-2000 prefab. A company that mostly works on newer subdivisions will miss what’s happening inside a coal-era flue. A company that only does historic restoration won’t have the adapter knowledge for a discontinued factory cap. We do both, and we document both with camera footage the homeowner can watch in real time.
Corrine Halstead leads our team, and she’s built the operation around one rule: show the customer what we found, don’t just tell them. That’s Clause 4 of the Haven Standard, the set of written promises we’ve worked under since 2009. It requires a documented photo record on every job, not as an add-on but as the default. When we tell a Lebanon homeowner their crown is spalling or their clay-tile liner has cracked, we’re showing them the live feed from the camera, not asking them to take our word for it.
Reviews from Lebanon customers consistently mention the same things: the tech was on time, the price matched the written quote, and the photos made the decision obvious. We’re not the cheapest crew in Wilson County, and we don’t try to be. We’re the crew that hands you a written scope, a written price, and a written warranty before anyone touches your chimney. If you bring us a competitor’s written estimate, we’ll give you a free second opinion. No pressure, just the facts on the page in front of you.
Our Chimney Cap & Crown Services in Lebanon
Every cap and crown job starts with the same step: a camera-scan inspection that follows the NFPA 211 Level 2 standard. In Lebanon, that step matters more than in most places, because what we find inside the flue determines what kind of cap or crown work actually solves the problem. Here’s what we handle most often in this city.
Cap Installation
A standard cap installation in Lebanon runs $225 to $380 for most single-flue masonry chimneys. We install caps from Famco and Copperfield, sized to your flue’s actual inner diameter, not a guess from the ground. On older homes near the historic square, we frequently find flues that are undersized for wood burning, which means a universal cap from the hardware store will restrict draft even further. We measure, we show you the numbers, and we install what fits.
Cap Replacement
Cap replacement in Lebanon usually falls between $280 and $520, depending on the flue configuration and whether we’re matching an existing brand or fabricating an adapter. This is especially common in post-2000 homes off Highway 109 and along the south side of the city, where factory-built fireplace models have left production and their original caps are no longer available. If you’ve got a rusted or missing cap on a zero-clearance unit, don’t let anyone tell you a generic cap will fit. It often won’t, and the airflow tolerances on those units are tight enough that the wrong cap can cause smoking, backdrafting, or worse.
Crown Repair
Crown repair is the service we recommend most often in Lebanon, and the price range is $350 to $640 for a standard repair, or $700 to $1,100 for a full rebuild with a proper overhang and drip edge. Lebanon’s winter ice storms and freezing rain events put real stress on chimney crowns, and the older concrete mixes used on pre-war homes near the square were never formulated to handle decades of freeze-thaw cycling. When the crown cracks, water enters the masonry below it, and that’s when you start seeing spalling brick faces and rusted damper assemblies. We rebuild crowns so water sheds off the chimney instead of soaking into it.
Crown Coating
Crown coating runs $275 to $450 and is the right call when the crown is still structurally sound but showing hairline cracks. We use a flexible, waterproof sealant that bridges small gaps and prevents water intrusion during Lebanon’s freeze-thaw events. But here’s the honest caveat: coating is not a fix for a crown that’s already crumbling. If the surface is spalling badly, a coating will peel off within a season or two. We’ll tell you plainly when a coating is enough, and when a rebuild is the only thing that will actually hold up. That’s the whole point of the camera and the written scope.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Lebanon
We install and service caps from Copperfield, Famco, and DuraFlex, and we stock the most common adapters and sizes in our local inventory so Lebanon customers aren’t waiting a week for parts. For custom multi-flue caps on older homes near the square, Copperfield is our usual choice, because their build quality holds up to the ice loading Lebanon gets in January and February. For factory-built prefab systems, we keep a library of discontinued brand specs on file and fabricate custom adapters when the original cap is no longer made. If you’re not sure what brand your fireplace is, that’s fine. The camera inspection will tell us, and we’ll show you the nameplate while we’re up there.
Common Chimney Cap & Crown Problems We See in Lebanon Homes
- Freeze-thaw crown failure. Lebanon sits in the Nashville Basin, roughly 30 miles east of the urban core, and it catches winter ice storms slightly differently than Davidson County does. Repeated freezing rain events push water into hairline crown cracks, where it freezes, expands, and widens the crack. A crown that looked fine in October can be visibly failing by February.
- Coal-era flues converted to wood without relining. Homes within a few blocks of Lebanon’s historic public square were often built for coal heat. Their clay-tile flues were sized for coal combustion, not wood. When someone converted them to wood burning without relining, the flue became undersized and prone to rapid creosote buildup, even when a new cap is installed. A camera inspection is the only way to confirm this.
- Rusted or missing factory caps on post-2000 prefabs. Along the Highway 109 corridor and in the newer subdivisions on the west side of Lebanon, most fireplaces are factory-built zero-clearance units. When the original cap rusts out or blows off, the exact replacement part may no longer be produced. Installing a generic cap can cause drafting problems, and in some cases a custom adapter is the only safe fix.
- Undersized or unlined flues hidden behind intact fireplaces. This is the condition that worries us most in Lebanon’s older homes. The firebox looks fine, the surround is intact, but behind it the flue is either unlined or lined with cracked clay tiles sized for coal. No visual inspection from the roof or the firebox will catch this. Only a camera run through the flue reveals it. That’s why we run the camera on every single cap and crown job, even when you’re “just getting a cap.”
Pricing for Chimney Cap & Crown in Lebanon, TN
Here’s what you can expect to pay in Lebanon’s market, based on the jobs we complete here most frequently. A standard single-flue cap installation runs $225 to $380. Cap replacement with a brand-matched or custom-adapted unit runs $280 to $520. Crown repair with crack remediation runs $350 to $640. A full crown rebuild with proper overhang and drip edge runs $700 to $1,100. Crown coating for early-stage hairline cracks runs $275 to $450. Multi-flue custom caps for larger historic chimneys near the square generally run $500 to $850, depending on flue count and spark arrestor requirements.
What affects the price in Lebanon specifically is housing age and flue condition. If your home was built before 1940 and the camera shows cracked clay tiles or unlined sections, we’ll quote the cap or crown work alongside a clear recommendation for the flue. But you’ll see both numbers in writing before anything starts, and you’ll decide what gets done. No one at Emberly Chimney Cleaners will pressure you into a liner you haven’t seen with your own eyes. Call (980) 580-8641 for a written estimate. It’s free, and the camera inspection is part of it.
We Also Serve Cities Near Lebanon
Our crews serve Chimney Cap & Crown in Lebanon and the surrounding Wilson County and Sumner County communities. If you’re in Mount Juliet, Gallatin, Hendersonville, or La Vergne, we can often schedule cap and crown work the same week as our Lebanon visits. The same camera inspection, written pricing, and Chimney Cap & Crown warranty apply throughout the area.
Serving Lebanon, TN - Our Local Coverage Area
We’re based in the Lebanon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Lebanon
Because the flue behind the fireplace may have been built for coal, not wood, and no visual inspection from the roof or firebox can confirm what’s inside it. Homes near Lebanon’s public square commonly have original clay-tile liners that are cracked, undersized, or unlined entirely after a wood conversion. Replacing a cap without knowing this can trap moisture and creosote in a flue that’s already compromised. We run the camera on every visit and show you the live feed before we quote anything. For a cap replacement in Lebanon, call (980) 580-8641 and ask for the camera-scan inspection.
Yes. Factory-built fireplaces need caps just as much as masonry chimneys do. The difference is that your cap is model-specific, and if the original is rusted or missing, a generic replacement may not fit correctly. I’ve seen incorrectly fitted caps on prefab units cause smoking, backdrafting, and water entry into the chase. We keep discontinued brand specs on file and fabricate custom adapters when needed. Call (980) 580-8641 with your fireplace model if you know it, or we’ll find it during the inspection.
Lebanon’s position in the Nashville Basin means it often catches freezing rain events that cycle through melt and refreeze over several days. Each cycle pushes water into whatever cracks already exist in your crown, and the expansion widens those cracks. After a few seasons, a crown that was stable starts spalling, and water reaches the masonry below. The fix is a proper crown rebuild with an overhang and drip edge, which sheds water away from the chimney structure. For a crown evaluation in Lebanon, call (980) 580-8641.
Sometimes, but not usually, and this is exactly the kind of mistake we help Lebanon homeowners avoid. If your home near the square has a coal-era flue that was converted to wood without relining, the smoking problem is being caused by an undersized or cracked flue, not the absence of a cap. Installing a cap on an undersized flue can actually make drafting worse. The camera inspection tells us which problem you actually have, and you’ll see the evidence before we recommend anything. For a smoking problem in Lebanon, start with the inspection. Call (980) 580-8641.
Look for visible cracks wider than a hairline, spalling concrete or brick fragments on the roof or ground, missing chunks of mortar along the crown edge, and any pooling water after rain. In Lebanon’s older homes, also check for white staining on the brick below the crown, which indicates water has been migrating through the masonry. If you see any of these, the freeze-thaw cycle will make it worse before spring. We’ll inspect it with the camera, show you what we find, and give you a written price for whatever is actually needed. Call (980) 580-8641 to schedule.
Ready to See What’s Actually Happening on Your Chimney?
If you live in Lebanon, you deserve to see the inside of your flue before anyone tells you what to buy. That’s the way we’ve done it since 2009, and it’s written into the Haven Standard: Clause 1 requires a written price and scope before work starts. Clause 4 requires a photo record on every job. There’s a 365-Day Done Right Promise behind every cap and crown we install. Call (980) 580-8641 now and ask for a free estimate with camera inspection. We’ll put it in writing.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Lebanon, TN since our founding in 2009.
Chimney Cap & Crown in Nearby Areas