Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Lebanon
A chimney cap and crown replacement in Lebanon, OH typically runs $240-$680 for a standard single-flue cap with install, and $800-$1,900 when the concrete crown needs a full rebuild. Most jobs are scheduled within 5-7 days. Emberly Chimney Cleaners serves homeowners throughout Lebanon with camera-documented inspections, written pricing before any work begins, and a 365-Day Done Right Promise on every job. Call (980) 580-8641 to book your free estimate.
Lebanon sits in a strange spot for chimney work. The homes around the historic public square date back to the early 1800s, and many still have the original masonry chimneys they were built with. A few miles south and west, along the Highway 109 corridor, you’ll find thousands of post-2000 subdivisions with prefabricated fireplace systems. Those two housing stocks fail in completely different ways, and a cap or crown fix that works for one will do nothing for the other. We know which type you have before we arrive, because we ask the right questions and we bring the right equipment.
Key takeaways:
- Cap replacement in Lebanon: $240-$680 for standard single-flue, $520-$1,150 for multi-flue
- Crown repair: $450-$1,200; full crown rebuild with proper overhang: $900-$1,900
- Every job includes a NFPA 211 Level 2 camera inspection and a documented photo record under Haven Standard Clause 4
- Written price, written scope, and written warranty before work starts. Always.
Why Emberly Chimney Cleaners Is Lebanon’s Preferred Chimney Cap & Crown Company
We made camera-scan documentation our default inspection standard in 2009, years before insurers or regulators asked for it. That practice became Clause 4 of the Haven Standard, and every tech on our Lebanon jobs goes down the flue with a camera before touching anything. You see the condition of your flue, your crown, and your cap with your own eyes. No recommendations on faith. Our crews have worked on both sides of Lebanon’s housing divide: century-old coal-era chimneys near the square and 15-year-old prefab systems near Miller Road and beyond. That dual experience matters, because the fix is never the same.
Every Lebanon job is staffed by background-checked, uniformed technicians. You get a named tech assigned to your appointment and a text when they’re on the way. Our office answers the phone 24/7 with a live person, not a voicemail tree. When you call (980) 580-8641, someone picks up.
Corrine Halstead leads our operations, and she’s built the team around one rule: if it’s not written down, it didn’t happen. Your quote is written. Your scope is written. Your warranty is written. The photo record from your camera scan is archived and available to you. That’s Haven Standard Clause 1, and it’s non-negotiable.
Our Chimney Cap & Crown Services in Lebanon
We handle the full Chimney Cap & Crown scope in Lebanon, from simple cap swaps to custom multi-flue fabrications. Here’s what that looks like on the ground.
Cap Installation
A correctly sized cap keeps rain, birds, and debris out of the flue and prevents downdrafts on windy Lebanon evenings. Standard single-flue caps from Famco or Copperfield run $180-$380 installed in most Lebanon homes. We stock the common sizes locally, so we don’t waste a trip ordering parts.
Cap Replacement
Rusted, bent, or missing caps are the most common call we get from Lebanon subdivisions along Highway 109. Those factory-built fireplace chases use sheet-metal caps that corrode fast in Mid-Tenn humidity. Replacement runs $240-$680 depending on flue count and chase dimensions. We’ll show you the rust before we quote it, not after.
Crown Repair
This is the service we emphasize for homeowners near Lebanon’s historic public square. Concrete crowns without a proper drip edge let water sit against the brick, and Lebanon’s freeze-thaw cycles do the rest. Crown repair or partial rebuild runs $450-$1,200 in Lebanon. We cut out the cracked material, form a proper slope, and pour a crown with the right overhang so water sheds off the brick instead of into it.
Crown Coating
On crowns that are structurally sound but showing surface cracks and water absorption, we apply a Gelco sealant coating. It’s a $350-$650 job in Lebanon when the crown doesn’t need structural work. We’ll tell you plainly if coating is all you need, or if the crown is too far gone and needs a rebuild instead. Nothing gets recommended without camera evidence.
Multi-Flue Cap and Custom Cap
Older Lebanon homes near the square often have multiple flues exhausting at different heights. A single oversized cap doesn’t work on those. We fabricate custom multi-flue caps from Olympia Chimney stock, sized and mounted to the existing brickwork. Plan for $520-$1,150 in Lebanon. When the flue pattern is unusual, we template it on site and build to fit, not adapt.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Lebanon
We install and service caps from Famco, Copperfield, and Olympia Chimney, along with sealants and liners from Gelco and DuraFlex. If you’ve got a specific cap on your chimney already, we’ll match the brand if it’s still manufactured and available. If it’s discontinued, we’ll tell you exactly which replacement fits. We keep common Lebanon sizes in inventory, so most cap replacements happen in a single visit. No ordering delays, no second trip charge.
Common Chimney Cap & Crown Problems We See in Lebanon Homes
- Freeze-thaw crown cracking near the historic square: Lebanon gets ice storms the Nashville core sometimes misses. Water seeps into hairline crown cracks, freezes, expands, and spalls the concrete edge. Once the crown loses its lip, water runs straight into the brick and mortar.
- Undersized clay-tile flues in pre-1900 homes: Many chimneys near downtown Lebanon were built for coal, then converted to wood-burning without relining. The tile flues are too small for modern draft requirements, which causes smoke spillage and rapid creosote buildup.
- Rusted chase caps in Highway 109 subdivisions: Factory-built fireplace systems use thin sheet metal for the chase cover and cap. In Lebanon’s damp winters and humid summers, those rust through in 10-15 years. Homeowners on East Main and Miller Road often don’t realize the cap is gone until water stains appear on the ceiling below the chase.
- Missing or poorly fitted caps letting in animals and debris: Lebanon’s tree canopy is dense in older neighborhoods, and uncapped flues fill with leaves, twigs, and squirrel nests. A $240 cap replacement prevents a $600 cleaning plus whatever damage the moisture caused in the meantime.
How Lebanon’s Climate and Housing Stock Affect Chimney Cap & Crown Work
Lebanon sits roughly 30 miles east of Nashville in the Nashville Basin. That location catches winter ice storms and freezing rain differently than the metro core, and it shows on chimney crowns. Concrete absorbs water, and when temperatures swing through the freeze line overnight, the water inside the concrete expands. Repeat that 20 or 30 times per winter and a crown with no drip edge starts spalling in under a decade. We see it constantly on homes along Broadway and Mulberry Street, where original crowns from the 1920s and 30s were poured flat with no overhang at all.
The other Lebanon-specific issue is combustion. Middle Tennessee winters are mild most days, so homeowners burn low, smoldering fires during short cold snaps instead of sustained hot ones. That’s the exact burn pattern that produces the fastest creosote accumulation in flue liners. A capped flue with heavy creosote is a chimney fire waiting for a hot day. We don’t fix the cap and ignore the creosote. The camera scan tells us what’s actually in there.
Pricing for Chimney Cap & Crown in Lebanon, OH
Here’s what you can expect to pay in Lebanon’s market, including parts and labor:
| Service | Lebanon Price Range |
|---|---|
| Single-flue cap installation | $180-$380 |
| Single-flue cap replacement (remove old, install new) | $240-$680 |
| Multi-flue cap installation | $520-$1,150 |
| Crown coating with Gelco sealant | $350-$650 |
| Crown repair (partial rebuild, proper overhang) | $450-$1,200 |
| Full crown rebuild | $900-$1,900 |
What moves a Lebanon quote to the high end of the range: a multi-flue chimney, a chase cap that needs custom fabrication, severely spalled masonry that requires more concrete work, or access that needs a taller ladder than standard. What moves it down: a single flue, good roof access, a crown in repairable shape. Every quote includes the Level 2 camera scan and the photo record. Call (980) 580-8641 for an exact written price.
We Also Serve Cities Near Lebanon
Our crews cover Lebanon and the surrounding communities in Warren, Butler, and Montgomery Counties. If you’re in Mason, Middletown, Miamisburg, or Fairfield, we’ll come to you. Same written pricing, same camera-scan standard, same 365-Day Done Right Promise. Call (980) 580-8641 and tell us where you are.
Serving Lebanon, OH - Our Local Coverage Area
We’re based in the Lebanon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Lebanon
Crown repair is the most common fix because the original crowns were poured flat with no overhang, and Lebanon’s freeze-thaw cycles have spent decades spalling the edges. A new cap won’t stop water that’s already running into the brick from a cracked crown. You’ll need the crown rebuilt or coated first. On one century-old house near the Lebanon public square, our crew found a cracked clay-tile flue liner and spalling mortar during a Level 2 inspection. We installed a custom multi-flue cap from Olympia Chimney and coated the rebuilt crown with Gelco sealant, eliminating the freeze-thaw water intrusion that had been slowly destroying the brickwork. Call (980) 580-8641 for an exact quote, written before any work starts.
A custom cap can help with wind-related downdrafts, but it cannot fix an undersized flue. If your home near the historic square was built before 1900 and converted from coal to wood without relining, the flue itself may be too small for safe draft. The only way to know is a camera scan. We’ll show you the footage. If a custom cap is the right fix, we’ll build it. If you need a liner, we’ll tell you that instead, with written pricing for both. Call (980) 580-8641.
The thin steel used in chase covers and caps corrodes fast in Lebanon’s combination of humid summers, damp winters, and frequent rain. Most factory-built caps installed when the home was built are unpainted galvanized steel, and they fail within 10-15 years. Replacement caps from Famco or Copperfield in powder-coated finishes last significantly longer. We also check the chase flashing while we’re up there, because a rusted cap often means the flashing behind it is failing too. Call (980) 580-8641 and we’ll inspect it with a camera.
No. If the flue tile has already cracked or spalled, a coating on the crown does nothing for the inside of the chimney. The flue needs to be assessed for relining. A crown coating only makes sense when the crown itself is still structurally sound and the problem is surface-level water absorption. We’ll show you the camera footage of the flue tile before recommending anything. Written price, written scope, written warranty, every time. Call (980) 580-8641.
Yes. Older masonry chimneys often have multiple flues at different heights, odd brick dimensions, and irregular chimney tops. A standard single-flue cap from a big-box store won’t fit properly. Custom or multi-flue caps from Olympia Chimney are the norm near the square. Newer subdivisions along Highway 109 usually take a stock single-flue or chase cap. The wrong cap on a historic chimney can actually worsen drafting. We measure on site and build to fit. Call (980) 580-8641 for a free estimate.
Get a Written Quote for Chimney Cap & Crown Work in Lebanon
You’ll get a written price, a written scope of work, and a written warranty before any work begins. You’ll get camera footage of your flue, crown, and cap as part of the inspection. You’ll get a documented photo record when the job is done. If a competitor gives you a written estimate that’s lower, bring it to us for a free second opinion. We’re not here to upsell you on a liner you don’t need. We’re here to show you exactly what’s there and fix what’s broken. Call Emberly Chimney Cleaners at (980) 580-8641 to schedule your inspection in Lebanon.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Lebanon and surrounding cities with camera-documented chimney inspections and written pricing since 2009.