Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Kendall
A chimney cap and crown repair in Kendall usually means one thing: rain has been getting into a flue that never sees fire. Most Kendall chimneys are decorative, built into 1970s-1990s tract homes as a selling point, not a heating source. So the damage we find is almost always moisture, rust, and animals, not creosote. If you’re in Kendall and your cap is rusted through, missing, or your crown is cracking, call (980) 580-8641. We’ll put a camera down the flue, show you the photos, and hand you a written price before anything gets touched.
Why Emberly Chimney Cleaners Is Kendall’s Preferred Chimney Cap & Crown Company
Kendall homeowners don’t need a chimney company that talks about roaring fires and stacked cordwood. They need someone who understands that a chimney on a stucco tract home near Killian Parkway or The Hammocks is a moisture management problem first and a fireplace second. That’s what we do. Our Chimney Cap & Crown team has inspected thousands of Kendall flues, and the pattern is consistent: original builder-grade caps rusted to lace, crowns spalled by thermal shock, and flues colonized by starlings or roof rats during the wet season.
Every visit starts with an NFPA 211 Level 2 camera scan. You see what we see, in real time, on the screen. Then you get a written scope, a written price, and a written warranty before we lift a tool. That’s Haven Standard Clause 1. We don’t ask you to trust us. We show you the rust, the cracks, the nest, and the standing water, then tell you exactly what it costs to fix. Corrine Halstead, who runs our Kendall operations, holds every job to that standard.
Our Chimney Cap & Crown Services in Kendall
Four services cover ninety percent of what we do in Kendall. Here’s how each one plays out in this market, where the fireplace is decorative and the rain is relentless.
Cap Installation
If your Kendall chimney has no cap at all, it’s open to every downpour between June and November. That’s a standing invitation for European starlings and roof rats. We install stainless steel caps sized to your flue, with spark arrestor mesh and a mechanical fastening system that won’t peel off in the first thunderstorm. Most installations in Kendall run $285-$445 for a standard single-flue stainless cap, installed.
Cap Replacement
The original galvanized caps on 1980s and 1990s Kendall tract homes were never built for 60-plus inches of annual rain. By the time we arrive, they’re rusted through at the seams, the mesh is gone, and the cap is half-attached. Replacement is straightforward: we pull the old one, assess the flue, and install a stainless or copper cap that actually fits. Expect $240-$520 depending on flue size and whether you choose standard stainless or a custom Copperfield cap.
Crown Repair
Kendall’s sun is brutal. Daily summer rain followed by 90-degree heat thermal-shocks concrete crowns until hairline cracks become channels for water. That water runs down the flue liner and into the smoke chamber, feeding mold you’ll smell long before you see it. We repair crowns with a proper crown coat, not a smear of silicone. A typical crown reseal and minor crack repair in Kendall runs $295-$585. If the crown is spalled beyond patching, we’ll rebuild it and quote that separately, in writing, before we start.
Crown Coating
A Gelco crown coat is the most cost-effective thing you can do for a Kendall chimney crown that’s still structurally sound but showing surface cracks. It’s a flexible, waterproof membrane that moves with the thermal cycles instead of fighting them. Most Kendall crown coatings run $340-$620. It’s usually a half-day job, and you get before-and-after photos in your documented record, per Haven Standard Clause 4.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Kendall
We stock and install materials from Copperfield, DuraFlex, and Gelco, which means we’re not waiting on a distributor in another county when your Kendall cap needs replacing. Copperfield caps are our default for custom work on odd flue sizes and prefab chase tops. DuraFlex liners come out when a rusted cap has let so much water down the flue that the liner itself is compromised. Gelco crown coat handles the crown seal. The point of naming these brands is simple: you can look up what they cost, and you’ll see our installed price is honest.
Common Chimney Cap & Crown Problems We See in Kendall Homes
- Crown spalling from thermal shock. Kendall’s daily summer rain cycle heats the crown, drenches it, heats it again. The original concrete develops hairline cracks in year five and spalls by year fifteen. Water then runs down the flue liner and pools in the smoke chamber, feeding mold in a fireplace that hasn’t been lit in a decade.
- Cap loss from hurricane gusts. Old galvanized caps were friction-fit or held with one rusted screw. A 70-mph gust from a September storm peels them off and drops them in the yard. The flue then sits open through the rest of hurricane season, collecting rain, leaves, and eventually a nest.
- Chase cover rot on factory-built units. Newer Kendall homes in master-planned communities like Kendall West or Country Walk often have prefab fireplaces with a galvanized chase top. Those seams rust through in eight to twelve years of South Florida humidity. Rain pours directly into the firebox. The homeowner sees a rust stain on the ceiling and assumes a roof leak.
- Starlings and roof rats in uncapped flues. The wet season is nesting season. An uncapped flue is a dry, protected cavity. We remove nesting material, treat the flue, and cap it properly. This is the most common call we get in November, right after that first cool front when someone finally opens the damper.
Pricing for Chimney Cap & Crown in Kendall, FL
Here’s what Kendall homeowners actually pay us, in writing, before work starts. A standard stainless steel cap installation on a single-flue masonry chimney: $285-$445. Cap replacement with old cap removal and disposal: $240-$520. Crown repair with crack sealing and crown coat: $295-$585. Custom cap fabrication for non-standard flue sizes or prefab chase tops: $480-$850. Crown rebuild when the old crown is beyond saving: $620-$1,150. Every price includes the Level 2 camera scan, the written quote, and the documented photo record when the job is done. We don’t do “call for a quote.” The price is on the paper in your hand before we touch the chimney. Call (980) 580-8641 and we’ll schedule the inspection.
We Also Serve Cities Near Kendall
While this page focuses on Chimney Cap & Crown in Kendall, our crews also cover the broader South Florida footprint, including Miami, Jacksonville, Tampa, and Orlando. Scheduling is coordinated through our Miami office, with local Kendall technicians dispatched based on proximity so you’re not paying travel time from across the state.
Serving Kendall, FL - Our Local Coverage Area
We’re based in the Kendall area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Kendall
Because the old one is almost certainly rusted through or missing its spark arrestor mesh, even if it looks fine from the ground. Kendall’s rain and humidity corrode galvanized caps from the inside out. A cap that’s been up there since 1987 is not protecting anything. We’ll show you the camera footage of the rust and the flue condition, and you decide. The inspection is part of every visit. If the cap is actually sound, we’ll tell you that too. Call (980) 580-8641 if you want an honest read.
You won’t see the cracks from the ground. Hairline fractures in a concrete crown are invisible from 15 feet below, especially against a stucco chimney. The signs are inside: a musty smell when you open the damper, efflorescence on the firebox walls, or water staining in the smoke chamber. Our Level 2 camera scan sees all of it. We’ll photograph the crown up close and show you exactly what’s cracking. If it’s still sound, we’ll document that and leave. If it’s failing, we’ll quote the crown coat or rebuild in writing.
You can absolutely use a custom cap. Most prefab chase tops in Kendall rust through at the seams long before the fireplace itself fails, and the original manufacturer’s replacement part is often more expensive and made of the same galvanized steel. We fabricate custom stainless chase covers and caps sized to your specific chase dimensions. If the Terra Cotta or Killian area home has an odd chase footprint, a custom Copperfield cap is usually the better long-term answer. We’ll measure, quote, and install on our schedule, not a factory’s.
First, don’t run the fireplace, and call us. The flue is open, which means the next heavy rain is going straight down into your firebox. It also means roof rats and starlings now have an entry point. We’ll come out, assess what’s left, remove any loose remnants still hanging on the flue, and install a properly fastened stainless cap. If water already got in during the storm, we’ll camera the flue and check for liner damage. The sooner you call (980) 580-8641, the less damage gets done.
Yes, both. A rusting chase cap on a direct-vent unit lets rain into the air intake and exhaust path, which causes drafting problems and can push carbon monoxide back into the house if the vent is partially blocked. It’s also a firebox rust issue. We see this in the 2000s-era subdivisions around Kendall Drive, where the original chase tops are hitting the 20-year mark. We replace the chase cover, check the vent run with the camera, and confirm the draft is pulling correctly before we leave. If it’s a gas unit, we’ll recommend a trained gas tech for any line work beyond the vent and chase.
Call Emberly Chimney Cleaners in Kendall
If your Kendall chimney cap is rusted, missing, or you honestly can’t remember the last time anyone looked at the crown, call (980) 580-8641. We’ll schedule a Level 2 camera inspection, show you the photos, and hand you a written price with a written warranty before any work begins. That’s how this works. No flashlight glances, no mystery quotes, no upselling on repairs you don’t need. Just evidence and a price. Corrine Halstead and the Kendall crew answer the phone around the clock.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Kendall, FL with documented chimney inspections and written pricing since 2009.
Chimney Cap & Crown in Nearby Areas