Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Bloomington, CA
Chimney cleaning in Bloomington, CA runs $189 to $399 for most homes, and the work is done the same visit unless we find damage that needs its own quote. What makes Bloomington different is the burn cycle: months of SCAQMD No-Burn days followed by heavy fires on the few permitted nights. That pattern creates dense, glossy creosote from very few actual fires, which means a chimney that “hasn’t been used much” can still be a serious fire hazard. Call (980) 580-8641 for a written quote before any work starts.
Why Bloomington Homes Are Different
Bloomington’s housing is mostly post-WWII ranch-style tract homes built from the 1950s through the 1970s. Those original fireplaces are now 50 to 70 years old, and we routinely find cracked fireboxes, corroded damper assemblies, and deteriorated mortar joints that need attention before a sweep is even useful. A meaningful share of Bloomington properties are manufactured and mobile homes with factory-built metal fireplaces, which require a different cleaning protocol than masonry work.
The San Bernardino Valley basin traps particulate matter, and Bloomington sits squarely inside SCAQMD jurisdiction. No-Burn curtailment days are frequent here. Homeowners go months without a single fire, then burn heavily when restrictions lift, often with improperly seasoned wood. That produces concentrated creosote deposits, and Santa Ana winds regularly push debris, leaves, and ash into uncapped flues during the long dormancy. Every sweep in Bloomington should include a look at what accumulated while the fireplace sat cold.
We also pull more animal debris from Bloomington flues than almost anywhere else in the Inland Empire. Barn owl pellets, European starling nests, and roof rat debris are common finds, especially on older rentals and homes with uncapped or poorly capped chimneys that sat unused for six to nine months. If you hear scratching or smell something odd near the firebox, it is likely not your imagination.
Our Main Bloomington Services
Most Bloomington homeowners call us for one of two problems: a fireplace that will not draw or has visible damage, or a cap and crown that are letting water and animals in. Both services start with the same camera-scan inspection we do on every visit.
Fireplace Services in Bloomington
Bloomington’s ranch-era fireplaces often have dampers that seized during long curtailment seasons, and fireboxes cracked by the Inland Empire’s hard winter freezes. We repair fireboxes, replace damper assemblies, and rebuild smoke chambers, then document the work with photos before and after. Fireplace Services in Bloomington covers the full scope of what we do from the firebox up.
Chimney Cap & Crown in Bloomington
The crown is the concrete surface at the top of the chimney that sheds water away from the flue. In Bloomington’s 105°F summers and occasional hard freezes, crowns crack and let water into the masonry below. We install and repair caps, rebuild crowns, and seal the top of the chase on manufactured homes, which are especially common here. Chimney Cap & Crown in Bloomington has the details, including our local pricing for cap and crown work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Bloomington
Chimney sweep in Bloomington is not just about removing soot; it is about removing the dense, shiny creosote that builds up during the valley’s long No-Burn stretches and then bakes on during heavy permitted fires. The older masonry fireplaces and the factory-built metal units common in Bloomington’s manufactured homes both need a documented cleaning and inspection before the burning season starts. Chimney Sweep is the full service page, but the local specifics are below.
Level 1 Inspection
Signs you need it
You use the fireplace occasionally and nothing has changed, but you want a documented baseline before burning season in Bloomington.
What it costs in Bloomington
A Level 1 inspection typically runs $125 to $250, and we include the camera-scan documentation on every visit.
How we do it
We check the accessible portions of the chimney interior and exterior, verify the flue is clear, and confirm the fireplace and damper are in safe working order, then hand you a written report with photos.
Level 2 Inspection
Signs you need it
You bought the home, changed the fuel type, had a chimney fire, or the chimney sat cold through a full SCAQMD curtailment season with potential animal entry.
What it costs in Bloomington
A Level 2 inspection runs $249 to $449 in Bloomington and includes the full camera scan down the flue.
How we do it
We run a camera down the entire flue, inspect the attic and crawl space where accessible, and document every finding with stills and video as required by NFPA 211 Level 2.
Creosote Removal
Signs you need it
You see shiny black or brown glaze on the flue walls, or the fireplace smells strong and acrid even when cold.
What it costs in Bloomington
Creosote removal runs $350 to $800 depending on the thickness and class of the deposits, which in Bloomington often reach Class II or III from the curtailment burn pattern.
How we do it
We use rotary tools with specialized heads to break down the hardened creosote without damaging the flue liner, then vacuum everything out and show you the before and after camera footage.
Soot Removal
Signs you need it
You get smoke backing into the room on start-up, or the fireplace has a dull gray film that rubs off easily.
What it costs in Bloomington
Soot removal runs $189 to $299 as part of a standard sweep in Bloomington.
How we do it
We brush and vacuum the loose soot from the firebox, smoke chamber, and flue, then confirm the flue is clear with the camera before we finish.
Annual Sweep
Signs you need it
It has been more than a year since the last sweep, or you are preparing for the narrow legal burning window after SCAQMD curtailment lifts.
What it costs in Bloomington
A standard annual sweep in Bloomington runs $189 to $299, with the Level 1 inspection included.
How we do it
We lay drop cloths, run a HEPA vacuum, brush the flue and smoke chamber, remove the debris, and leave you a documented photo record as required by Haven Standard Clause 4.
What Chimney Sweep Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Level 1 Inspection | $125 - $250 |
| Level 2 Inspection | $249 - $449 |
| Creosote Removal | $350 - $800 |
| Soot Removal / Annual Sweep | $189 - $299 |
How often should I have my chimney swept in Bloomington?
The NFPA standard is once a year, and in Bloomington that timing matters more than most places. The SCAQMD curtailment cycle creates hard creosote even from light use, so a pre-season sweep in late summer or early fall is the right window. We can schedule that now at (980) 580-8641.
Can you clean a factory-built fireplace in a Bloomington manufactured home?
Yes. Factory-built metal fireplaces require different brush heads and gentler vacuum pressure than masonry work, and we stock both. The protocol is mandated by the manufacturer, not by us, and we document the cleaning with camera footage every time. Call (980) 580-8641 for a written quote.
Chimney Repair in Bloomington
Chimney repair in Bloomington is mostly about age and thermal stress. The 50-to-70-year-old mortar joints in ranch-era masonry chimneys fail from decades of 105°F summers and hard winter freezes, and Santa Ana winds push water into every crack that opens. Chimney Repair is the full service page, but the local conditions and pricing are here.
Mortar Repointing
Signs you need it
The mortar joints look sandy, recessed, or you can scrape out crumbs with a flathead screwdriver.
What it costs in Bloomington
Repointing in Bloomington runs $20 to $35 per square foot for typical ranch-era brick chimneys.
How we do it
We grind out the failed mortar to a consistent depth, pack in new mortar matched to the original color, and document the finished joints with photos.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, popping, or leaving red dust and chips on the roof or ground below the chimney.
What it costs in Bloomington
Spalling brick repair in Bloomington runs $200 to $600 per affected area, depending on how many bricks need replacement.
How we do it
We cut out the damaged brick, replace it with matched units, and repoint the surrounding joints, then seal the area to slow future water intrusion.
Chimney Waterproofing
Signs you need it
You see water stains on the ceiling or walls near the chimney, or the chimney looks darker after rain.
What it costs in Bloomington
Waterproofing in Bloomington runs $350 to $650 for a typical single-flue chimney.
How we do it
We clean the masonry, apply a vapor-permeable siloxane-based waterproofing that lets the brick breathe while blocking liquid water, and document the application.
Flashing Repair
Signs you need it
You see rusted or lifted metal where the chimney meets the roof, or water stains on the ceiling after Santa Ana-driven rain.
What it costs in Bloomington
Flashing repair in Bloomington runs $250 to $600 for typical repair work, and full replacement runs $750 to $1,500.
How we do it
We inspect the roof-to-chimney junction, replace or reseat the step and counter flashing, and seal the joint with a high-grade roofing sealant, then photograph the finished work.
Chimney Rebuilding
Signs you need it
The chimney is visibly leaning, the brickwork is loose, or the crown and top courses have failed beyond patchwork repair.
What it costs in Bloomington
A partial rebuild in Bloomington runs $1,500 to $3,500; a full rebuild runs $6,000 to $15,000 depending on height and access.
How we do it
We tear down to solid masonry, rebuild the chimney with new brick and mortar, install a new crown and cap, and document the entire job with before, during, and after photos.
What Chimney Repair Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Mortar Repointing | $20 - $35 / sq ft |
| Spalling Brick Repair | $200 - $600 per area |
| Flashing Repair | $250 - $600 |
| Full Rebuild | $6,000 - $15,000 |
Do I really need to repair cracked mortar, or can it wait?
Cracked mortar lets water into the chimney structure, and in Bloomington’s freeze-thaw cycle that water expands and accelerates the damage. What looks cosmetic now becomes spalling brick and a partial rebuild within a few winters. Call (980) 580-8641 and we will show you exactly where the damage is.
Can Santa Ana winds damage my chimney?
They can and they do. Sustained wind drives rain sideways into uncapped flues and forces water into cracked crowns and flashing. We find wind-driven water damage on Bloomington chimneys every season, and the fix is almost always cheaper before the first hard freeze. Call (980) 580-8641 for a written quote.
Chimney Liner & Rebuild in Bloomington
Chimney liner and rebuild work in Bloomington is usually driven by two things: cracked clay tile liners in 1950s-to-1970s ranch homes, and corroded factory-built liners in manufactured homes. The Inland Empire’s extreme thermal swings crack clay tiles, and once a liner is compromised, the fire risk and carbon monoxide risk are real. Chimney Liner & Rebuild is the full service page, with local pricing below.
Stainless Steel Liner
Signs you need it
The camera scan shows cracked or missing clay tile sections, or the flue is unlined and used with a wood-burning appliance.
What it costs in Bloomington
A stainless steel liner in Bloomington runs $1,500 to $4,500 installed, depending on height and access.
How we do it
We size the liner to the appliance and flue, lower it from the top, insulate where code requires, and connect at the appliance and cap, then camera-scan the finished install.
Flexible Liner
Signs you need it
The flue has offsets or bends that a rigid liner cannot negotiate, or you are relining an older masonry chimney with a non-standard path.
What it costs in Bloomington
A flexible liner in Bloomington runs $1,500 to $3,500 installed.
How we do it
We run a continuous flexible liner through the existing flue path, secure it at top and bottom, verify the connection with the camera, and document the completed installation.
Liner Replacement
Signs you need it
The existing liner is cracked, pitted, or spalling, and the camera footage shows sections that no longer protect the chimney structure.
What it costs in Bloomington
Liner replacement in Bloomington runs $1,500 to $7,500 depending on whether the old liner must be removed and the chimney height.
How we do it
We remove or break out the failed liner, prep the flue, install the new liner system, and finish with a top plate, cap, and full camera documentation.
Partial Rebuild
Signs you need it
The crown and top few courses of brick are cracked or loose, but the chimney body below is structurally sound.
What it costs in Bloomington
A partial rebuild in Bloomington runs $1,500 to $3,500.
How we do it
We remove the damaged top section, rebuild it with new brick and mortar, cast a new crown with proper overhang and drip edge, and document the finished work.
Full Chimney Rebuild
Signs you need it
The chimney is leaning, the brickwork is loose below the roofline, or the previous repairs have failed and the structure is no longer sound.
What it costs in Bloomington
A full chimney rebuild in Bloomington runs $6,000 to $15,000, with the final price driven by height, access, and the cost of matched brick.
How we do it
We tear down to the roofline or below, rebuild the chimney with new brick and mortar, install a new liner, crown, and cap as needed, and deliver a complete photo record of the job.
What Chimney Liner & Rebuild Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Stainless Steel Liner | $1,500 - $4,500 |
| Flexible Liner | $1,500 - $3,500 |
| Liner Replacement | $1,500 - $7,500 |
| Partial Rebuild | $1,500 - $3,500 |
| Full Chimney Rebuild | $6,000 - $15,000 |
Do I really need a new liner, or can I patch the old one?
You cannot safely patch a cracked flue liner. The liner is the only barrier between hot exhaust and the combustible framing around your chimney, and a cracked liner is a carbon monoxide and fire risk, not a cosmetic issue. We will show you the camera footage before recommending anything. Call (980) 580-8641 for a written quote.
Can you reline a manufactured home chimney in Bloomington?
Yes. Factory-built metal fireplaces accept specific liner systems, and we stock materials from DuraFlex and Copperfield that match the original manufacturer specifications. The installation is documented with camera footage from top to bottom. Call (980) 580-8641 to schedule the inspection.
Brands We Service in Bloomington
We work on all major chimney and fireplace brands in Bloomington, and we stock parts from Famco, Copperfield, and DuraFlex locally so common repairs do not wait on shipping. Turnaround on a stocked part is typically same-visit; special-order parts ship to the Inland Empire office within a few business days. See our brands for the full list.
Pricing for Chimney Cleaning in Bloomington, CA
| Service | Typical range in Bloomington |
|---|---|
| Level 1 Inspection | $125 - $250 |
| Level 2 Inspection | $249 - $449 |
| Soot Removal / Annual Sweep | $189 - $299 |
| Creosote Removal | $350 - $800 |
| Mortar Repointing | $20 - $35 / sq ft |
| Spalling Brick Repair | $200 - $600 per area |
| Chimney Waterproofing | $350 - $650 |
| Flashing Repair | $250 - $600 |
| Partial Rebuild | $1,500 - $3,500 |
| Stainless Steel Liner | $1,500 - $4,500 |
| Liner Replacement | $1,500 - $7,500 |
| Full Chimney Rebuild | $6,000 - $15,000 |
What pushes price up in Bloomington is the condition of older 1950s-to-1970s masonry and the animal debris we often find after long SCAQMD curtailment dormancy. Every job gets a written price, written scope, and written warranty before anyone starts, per Haven Standard Clause 1. No one from our crew will begin work until you have those documents in hand.
Neighborhoods We Serve in Bloomington
We work throughout Bloomington, from the older ranch tracts near Valley Boulevard to the manufactured home communities and the residential streets between Cedar and the 10 Freeway. Our crews are dispatched from the Inland Empire office, so we can usually reach most Bloomington addresses within a day or two of your call.
- Sunnybrook
- North Bloomington
- Larchmont
- Zamboni
- Crestmore Heights
Service Area - Cities Near Bloomington
We also serve the surrounding Inland Empire communities. If you are in Rialto, CA, Fontana, CA, Riverside, OH, or Colton, CA, we can schedule the same camera-scan inspection and written-price service there. Dispatch and scheduling are coordinated from the Inland Empire office to serve Bloomington locally.
Serving Bloomington, CA - Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Bloomington
Routine chimney cleaning and Level 1 or Level 2 inspections do not require a permit in Bloomington. Structural rebuilds or liner replacements may, depending on scope, and we will tell you in writing if a permit is needed for your specific job before any work begins. Call (980) 580-8641 for a written assessment.
Book in late summer or early fall, before SCAQMD lifts the typical No-Burn restrictions and everyone in Bloomington schedules at once. The valley’s burning window is narrow, and the weeks before it opens are the busiest of the year for every sweep company in the Inland Empire. Call (980) 580-8641 to get on the schedule now.
Yes. That is Clause 4 of the Haven Standard, and we have operated that way since 2009: on every visit, you get a documented photo and camera record, and we walk you through it before any repair or liner recommendation is made. You will see exactly what we saw. Call (980) 580-8641 to book your inspection.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomington Customers Say
"They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A.