Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Tamarac
Chimney cap and crown repair in Tamarac isn’t about creosote. It’s about stopping water from getting into a 40-to-60-year-old masonry structure that was rarely used for fires in the first place. A typical crown rebuild in Tamarac runs $450-$850, and a cap replacement with a quality stainless or copper unit runs $250-$600 installed. We work throughout Tamarac, from the 55+ communities off Southgate Boulevard to the villa clusters near the Sawgrass, and we’re at (980) 580-8641 when you need a straight answer.
Why Emberly Chimney Cleaners Is Tamarac’s Preferred Chimney Cap & Crown Company
We have a documented photo record on every job. That matters more in Tamarac than most places, because the chimneys here are old enough that you should never take a contractor’s word for what’s wrong. Clause 4 of the Haven Standard requires a camera scan and photo file on every visit, and we’ve operated that way since 2009. You watch the footage. You see the crack. You decide.
Our crews arrive in Tamarac in uniform, background-checked, and with a written price before any work starts. We answer the phone live, 24/7, not with a voicemail tree. Corrine Halstead leads the team, and the standard she enforces is simple: if it’s not done right, we make it right under the 365-Day Done Right Promise.
We know Tamarac’s housing stock. CBS ranch homes, attached villas, planned communities built between the late 1960s and mid-1980s. That means original clay-tile flues, deteriorated crowns, and flashing that hasn’t been touched since the Nixon administration. Local knowledge like that changes what we look for and how we quote.
Our Chimney Cap & Crown Services in Tamarac
Cap Installation
If your Tamarac chimney has never had a cap, or the cap rusted off years ago, that flue is open to every afternoon storm that blows in off the Everglades. We size and install single-flue or multi-flue caps from Famco and Copperfield. Installation in Tamarac typically runs $250-$450 depending on flue size and roof access.
Cap Replacement
Corroded galvanized caps are a Tamarac specialty. Original caps rust through at the seams after a few decades of South Florida humidity and salt-tinged air. We replace them with stainless or copper units sized for the actual flue, not whatever the home center had on the shelf. Replacement runs $275-$600 installed.
Crown Repair
The chimney crown is the concrete cap at the top of the chimney, and in Tamarac most original crowns were poured with basic mortar instead of a Portland-based mix. Decades of humidity, UV, and heavy rain reduce them to loose aggregate that ponds water. We rebuild crowns with a proper slope and drip edge. Crown repair in Tamarac runs $450-$850 for a standard rebuild, more if the flue tile needs replacement at the top.
Crown Coating
When a crown is structurally sound but starting to show hairline cracks, we apply a breathable crown coating from Gelco or Olympia Chimney. It seals against water intrusion but lets moisture vapor escape so the crown doesn’t spall from trapped water. Coating runs $200-$400 in Tamarac and typically extends crown life by 5-10 years.
BeforeAfterTrusted Brands We Service in Tamarac
We install and repair caps and crowns using materials from Gelco, Olympia Chimney, Famco, and Copperfield, sourced through our buying network to keep customer prices honest. We maintain local stock for the most common Tamarac applications – single-flue stainless caps, multi-flue custom units, and crown coating systems – which means most cap replacements and crown repairs are completed in a single visit. No “we’ll order the part” delays.
Common Chimney Cap & Crown Problems We See in Tamarac Homes
- Crown wash made with standard mortar. Tamarac’s daily humidity and heavy afternoon rains erode basic mortar crowns within a few decades, leaving a recessed channel that ponds water until it migrates into the block wall. The fix is a Portland-based rebuild with a proper slope.
- Rusted-out original flashing. The 40-to-60-year-old galvanized flashing hidden under a thin cap of stucco is rusted through at the roofline on most Tamarac chimneys. Every afternoon storm funnels water into the firebox, and the homeowner never knows until mold shows up in the drywall.
- Missing caps on long-dormant fireplaces. In Tamarac’s 55+ communities, fireplaces commonly sit unused for five, ten, fifteen years. A missing cap turns that flue into a raccoon den or a chimney swift roost, and chimney swifts are federally protected, so an active nest legally halts any cleaning work until the birds leave.
- Appliance venting through original clay-tile flues. Many Tamarac homeowners had a furnace or water heater vented into a chimney that was designed for an open fireplace. The appliance produces moisture that the old clay tiles were never meant to handle, which eats away the crown from the inside and accelerates cracking at the top.
Pricing for Chimney Cap & Crown in Tamarac, FL
We put pricing here because we believe written prices should exist before we ever walk in your door. Cap installation runs $250-$450. Cap replacement runs $275-$600 depending on size and material. Crown repair runs $450-$850 for a standard rebuild. Crown coating runs $200-$400. Custom multi-flue caps for a fireplace and appliance liner sharing the same chase run $400-$800. Every quote is written, scoped, and warrantied before work starts, and you get a camera inspection with photo record included on every visit under Haven Standard Clause 4. Call (980) 580-8641 for an exact written quote.
We Also Serve Cities Near Tamarac
If you’re outside Tamarac, we also cover Chimney Cap & Crown in Tamarac and surrounding South Florida communities including Jacksonville, Miami, Tampa, and Orlando. Dispatch for Tamarac jobs is coordinated from our South Florida office, and crews serve Tamarac locally.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Tamarac
Your crown is crumbling because it was poured 40-60 years ago with standard mortar, not a Portland-based mix, and Tamarac’s subtropical humidity, heavy seasonal rain, and intense UV have been eroding it ever since. A fireplace that never gets used still has a chimney exposed to weather 365 days a year. Crown repair in Tamarac runs $450-$850. Call (980) 580-8641 and we’ll show you the cracking on camera before quoting a rebuild.
Yes. When a fireplace and an appliance – a water heater or furnace – share the same chimney, you need a multi-flue cap that covers both flue openings and keeps each one protected from rain and animals. The appliance flue produces moisture that a standard single-flue cap won’t address properly. A custom multi-flue cap for Tamarac homes runs $400-$800 installed. Call (980) 580-8641 for a written quote with a camera inspection first.
A stainless or copper cap with a properly sized mesh screen and a locking base will keep raccoons out, but the cap has to be sized for your actual flue and installed so it can’t be pushed off. We use Famco and Copperfield caps with welded mesh and secure mounting, not the cheap push-on caps that raccoons knock loose within a season. Cap replacement in Tamarac runs $275-$600. Call (980) 580-8641 and we’ll measure before we quote.
A properly sealed crown on a 1970s Tamarac chimney typically needs recoating every 5-10 years, depending on how much direct sun and driving rain it takes. Homes near the Sawgrass and on open lots with no tree cover see faster UV breakdown. We use Gelco and Olympia Chimney coatings that breathe. Crown coating runs $200-$400 in Tamarac. Call (980) 580-8641 and we’ll tell you if recoating is enough or if the crown needs a full rebuild.
Yes, a competent home inspector will flag a cracked crown and note that it needs repair before closing. In Tamarac’s market, where most homes are 40-60 years old, crown cracks are one of the most common inspection findings. Getting the crown repaired or coated before listing costs $200-$850 and removes a negotiation point for the buyer. Call (980) 580-8641 and we’ll document the crown condition with photos you can show a buyer.
When we rebuilt that crown on the CBS ranch off Southgate Boulevard, the homeowner watched the camera feed the whole time and saw the spalling and the dark staining behind the water heater vent. That’s what we mean when we say nothing gets recommended without evidence you can see. If you’re in Tamarac and your chimney cap, crown, or flashing is in question, call (980) 580-8641. We’ll schedule a visit, run the camera, and give you a written price with a written scope before anything gets touched.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Tamarac under the Haven Standard since 2009.