Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Denton, TX
Chimney cleaning in Denton typically runs $149 to $269 for a standard sweep with a Level 1 inspection, and $249 to $399 when a camera scan is included. Denton’s mix of century-old Craftsman bungalows near the Square, 1960s brick ranches, and newer zero-clearance tract homes means no two chimneys here age the same way. If you haven’t had the flue looked at since you bought the house, call (980) 580-8641 and we’ll get you on the schedule with a written price before anyone arrives.
Why Denton Homes Are Different
Denton’s older rental neighborhoods north and east of the Square are where we find the worst of it. Homes near UNT and TWU turn over tenants every August, and landlords rarely think about chimney maintenance until a lease is signed and a tenant asks if the fireplace works. We’ve pulled squirrel nests, tennis balls, and a decade of creosote out of flues in the Craftsman bungalows on Oak and Hickory streets that were never inspected between tenants. The expansive black-clay soil in those neighborhoods also works against masonry: it swells and contracts with rain and drought, and hairline cracks in crowns and mortar joints slowly open up. By the time someone opens the damper on a cold night, rainwater has been finding its way into the firebox for years.
The newer subdivisions on Denton’s outer ring have their own issue. Zero-clearance fireplaces installed in 1990s and 2000s tract homes look self-sufficient, so homeowners assume the black metal box needs nothing. But those prefabricated fireboxes have flue liners and chase covers that corrode, and we regularly find gas-log fireplaces in Denton whose owners have never had a single sweep because nobody told them the flue still carries combustion gases.
And then there’s the weather pattern. Denton averages under thirty nights below freezing per year, which means fireplace use happens in short, unpredictable bursts. A chimney that sat dormant from March to November gets lit for one weekend cold snap, and any creosote or debris inside is now a fire load. Winter Storm Uri in February 2021 was the clearest example: thousands of Denton residents ran fireplaces continuously for the first time in years, and we spent the following months finding cracked flues and heavy creosote that had been silently waiting.
Our Main Denton Services
Two of the services Denton homeowners call about most have their own dedicated pages, because the work involved here is specific enough to deserve a deeper look.
Fireplace Services in Denton
From gas log sets in zero-clearance boxes to full masonry hearths in Craftsman-era homes, fireplace work in Denton spans a wide range. We see a lot of damper failures and smoke-chamber issues in older brick fireplaces near the Square, where decades of heat cycling have taken their toll. Whether you need a gas valve replaced, a smoke issue diagnosed, or a full fireplace teardown and rebuild, the details live on our Fireplace Services in Denton page. That page covers Denton-specific pricing, signs of trouble, and what a camera inspection reveals in this area’s housing stock.
Chimney Cap & Crown in Denton
The expansive clay soil under Denton’s older neighborhoods is brutal on chimney crowns. Hairline cracks open, water gets behind the mortar, and the freeze-thaw cycles of even thirty cold nights a year widen the damage fast. A missing or rusted chimney cap in a rental near campus is a standing invitation to squirrels and starlings. For crowns that need rebuilding, caps that need replacing, and the waterproofing that comes after, see our Chimney Cap & Crown in Denton page for local pricing and the signs to watch for before water damage spreads.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Denton
A chimney sweep in Denton addresses the most common problem we find: creosote buildup and hidden blockages in flues that have gone years without attention, often through multiple tenant turnovers or a change in home ownership. In the brick ranch homes and early 20th-century bungalows around the Square, the clay-tile liners were installed when Denton was a much smaller town, and most have never had a camera down the flue. We recommend a Level 2 inspection with every sweep in Denton because the findings are documented with photos, and you’ll know exactly what the flue looked like before and after. Our full Chimney Sweep hub page covers what’s included and the standards we work to. Here’s how the job breaks down in Denton.
Level 1 Inspection
Signs you need it
If you use your fireplace every winter and haven’t had a sweep in two years, a Level 1 inspection is the baseline service for a Denton chimney that’s been in regular use.
What it costs in Denton
A Level 1 inspection in Denton runs $75 to $149 as a standalone service, or is included with a standard chimney sweep at no added cost.
How we do it
We check the accessible portions of the flue, firebox, damper, and exterior stack, then document the findings in writing before recommending any further work.
Level 2 Inspection
Signs you need it
If you’ve bought a Denton home with a masonry fireplace and have no record of when the flue was last inspected, a Level 2 inspection is the right starting point.
What it costs in Denton
A Level 2 inspection in Denton runs $249 to $399 and includes a camera scan of the full flue interior, which is the only way to see cracks, gaps, or hidden blockages.
How we do it
We run a camera down the flue, record the condition of the liner and smoke chamber, and hand you a documented photo record so you can see what we saw.
Creosote Removal
Signs you need it
If you smell a sharp, tar-like odor near the fireplace or see dark, glazed buildup on the damper or firebox walls, the creosote load in your Denton flue needs professional removal.
What it costs in Denton
Creosote removal in Denton runs $149 to $299 depending on the stage of buildup, with heavy glazed creosote on the higher end of that range.
How we do it
We use rotary brushes and specialized tools to break down tar and glazed deposits, then vacuum the debris and re-inspect the flue to confirm the chimney is clean.
Annual Sweep
Signs you need it
Short of visible soot or debris, the best indicator for an annual sweep in Denton is simply a year of fireplace use, especially after the sporadic cold snaps this region sees.
What it costs in Denton
A standard annual sweep in Denton runs $149 to $269 and includes a Level 1 inspection with written documentation of what was removed.
How we do it
We run brushes from the firebox upward or the top down, remove soot and creosote, vacuum everything out, and leave the firebox clean with a record of the work.
What Chimney Sweep Costs in Denton
| Item | Typical range in Denton |
|---|---|
| Standard chimney sweep with Level 1 inspection | $149 - $269 |
| Level 2 camera inspection | $249 - $399 |
| Creosote removal (heavy buildup) | $149 - $299 |
How often should a Denton chimney be swept?
The National Fire Protection Association says any chimney should be swept when creosote reaches 1/8 inch thick, and for most Denton homes that means annually if you burn wood regularly. Call (980) 580-8641 and we’ll quote the sweep in writing before any work starts.
Can you sweep a chimney in a rental property?
Yes, and Denton landlords near UNT and TWU should schedule sweeps between tenants. We document everything with photos and a written report the landlord can keep for lease records.
Chimney Repair in Denton
Chimney repair in Denton most often starts with a masonry chimney whose crown or mortar joints have been cracked by the expansive clay soil that shifts seasonally through this region. We also see flashing failures on the steep-pitched roofs of Craftsman-era homes near the Square, where water intrusion has been happening quietly for years. A camera inspection tells us exactly what needs fixing before a single brick is touched. Our Chimney Repair hub page lays out the full scope of repair work; here’s what matters in Denton specifically.
Mortar Repointing
Signs you need it
Crumbling or missing mortar between bricks on the exterior stack means water is getting in, and in Denton’s clay soil neighborhoods the movement makes repointing a recurring need.
What it costs in Denton
Mortar repointing in Denton runs $800 to $2,500 depending on the square footage of the damaged area and access to the stack.
How we do it
We grind out the deteriorated mortar to a proper depth, mix a color-matched mortar, and tuck-point the joints to match the original brickwork.
Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney or damp spots in the attic after rain are the classic signs that flashing at the roof line has failed.
What it costs in Denton
Flashing repair in Denton runs $350 to $900 for standard step flashing replacement around the chimney base, higher if the roof line is steep or the flashing area is extensive.
How we do it
We remove the old flashing, inspect the roof decking underneath, install new step and counter flashing, and seal the transition with the proper materials.
Chimney Waterproofing
Signs you need it
If water is seeping through the brick but the structure is sound, a breathable waterproofing treatment on the exterior stack addresses the issue before it becomes spalling.
What it costs in Denton
Chimney waterproofing in Denton runs $500 to $1,200 depending on the height and condition of the stack and whether repairs are needed first.
How we do it
We clean the brick surface, make any necessary masonry repairs, then apply a vapor-permeable water repellent that lets the chimney breathe while keeping water out.
What Chimney Repair Costs in Denton
| Item | Typical range in Denton |
|---|---|
| Mortar repointing | $800 - $2,500 |
| Flashing repair | $350 - $900 |
| Chimney waterproofing | $500 - $1,200 |
Does Denton’s soil really crack chimney stacks?
Yes. The black-clay soils under Denton’s older neighborhoods swell when wet and shrink when dry, and that seasonal movement transfers stress to masonry chimneys. Cracks in the crown and mortar joints are the most common result.
Can you repair a chimney before winter?
We can, and fall is the right time in Denton. Getting repairs done before the first planned fire means the chimney is dry and sound, and you have a written record of what was fixed.
Chimney Liner & Rebuild in Denton
Chimney liner and rebuild work in Denton is most common in the city’s older housing stock, where original clay-tile liners have cracked under decades of heating and cooling cycles, compounded by the structural movement of the local clay soil. A cracked liner can’t be seen from the ground, which is why a camera inspection is the only honest way to know if the flue is safe. Our Chimney Liner & Rebuild hub page details every liner option; the Denton picture below highlights what we see most often.
Stainless Steel Liner
Signs you need it
Cracked clay tiles or gaps between tile sections on the camera scan mean the flue needs a new continuous liner, and stainless steel is the standard solution for Denton masonry chimneys.
What it costs in Denton
A stainless steel liner installed in Denton runs $2,500 to $5,000 for a typical single-story masonry chimney, depending on flue size and roof access.
How we do it
We measure the flue, select a properly sized stainless liner, drop it down the chimney, connect it at the appliance and crown, and insulate as needed.
Liner Replacement
Signs you need it
If the existing clay liner is spalling, with pieces of tile falling into the firebox or visible cracks on the camera, replacement is required before the fireplace should be used.
What it costs in Denton
Liner replacement in Denton runs $2,500 to $6,500 depending on whether the old clay tile needs to be broken out first and whether a stainless liner is being installed.
How we do it
We remove damaged tile sections where necessary, prep the flue, install the new liner system, and run a final camera scan to verify the installation from top to bottom.
Partial Rebuild
Signs you need it
When the chimney stack above the roofline is leaning, spalling badly, or has missing brick from years of Denton weather exposure, a partial rebuild of the upper section is called for.
What it costs in Denton
A partial chimney rebuild in Denton runs $3,000 to $8,000 depending on how many courses of brick need replacement and the roof pitch for access.
How we do it
We take the damaged section down to sound structure, rebuild it with new brick and mortar matched to the home, and install new flashing and a cap if needed.
What Chimney Liner & Rebuild Costs in Denton
| Item | Typical range in Denton |
|---|---|
| Stainless steel liner installation | $2,500 - $5,000 |
| Liner replacement (with tile removal) | $2,500 - $6,500 |
| Partial chimney rebuild | $3,000 - $8,000 |
Do I need a new liner if my old one looks fine from below?
You can’t judge a liner from below. A camera scan shows hairline cracks and hidden gaps that are invisible from the firebox, and in Denton’s older homes those hairline cracks are often the first sign of bigger problems.
How long does a liner replacement take?
Most stainless liner replacements in Denton are completed in one day. Full rebuilds take longer, and we quote the timeline in writing before any work begins.
Brands We Service in Denton
We service and install chimney systems from DuraFlex, HeatShield, Famco, and Copperfield, with parts stocked locally for most standard Denton jobs. That means no two-week wait while a part ships from a warehouse. See the full list on our brands page, and we’ll match the right system to your chimney’s size and use.
Pricing for Chimney Cleaning in Denton, TX
| Service | Typical range in Denton |
|---|---|
| Standard chimney sweep with Level 1 inspection | $149 - $269 |
| Level 2 camera inspection | $249 - $399 |
| Creosote removal | $149 - $299 |
| Mortar repointing | $800 - $2,500 |
| Flashing repair | $350 - $900 |
| Chimney waterproofing | $500 - $1,200 |
| Stainless steel liner installation | $2,500 - $5,000 |
| Liner replacement | $2,500 - $6,500 |
| Partial chimney rebuild | $3,000 - $8,000 |
The biggest price drivers in Denton are roof pitch, chimney height, and how long a chimney has gone without maintenance. A flue that hasn’t been cleaned in ten years costs more to bring back to service than one swept annually, because heavy glazed creosote and corroded components take longer to address.
Every price you see here is a written price before work starts. That’s not a Denton extra, it’s how we operate: no charge surprises, no upsells after the tech is already in your home.
Neighborhoods We Serve in Denton
Crews serve the whole city, from the historic districts around the Square to the outer-ring subdivisions along Loop 288 and down toward Corinth. Response time is typically same-week for most Denton neighborhoods, with some older neighborhoods taking a little longer if roof access is tight.
- Historic Denton Square area
- Idiot’s Hill
- Southridge
- Rayzor Ranch
- Corinthian Creek
Service Area - Cities Near Denton
Emberly Chimney Cleaners also serves homeowners in Little Elm, TX, Flower Mound, TX, Frisco, TX, and Lewisville, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Denton locally with the same written pricing and camera-documented work.
Serving Denton, TX - Our Local Coverage Area
We’re based in the Denton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Denton
Most routine chimney cleaning and repair work in Denton does not require a city permit, but structural rebuilds may. We’ll tell you in writing if a permit applies to your job before any work is scheduled, so you never get surprised down the road.
Same-week appointments are typical for most Denton neighborhoods, though peak fall season can push that to two weeks. Call (980) 580-8641 and we’ll give you the next available slot and a written price for the work before you commit.
Just clear a path to the fireplace and remove any decor from the hearth area. We’ll handle the rest, including floor protection and the full cleanup. You’ll get a text when your named technician is on the way.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Denton Customers Say
"Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.