Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Denton
Chimney cap and crown work in Denton runs $385-$1,150 for most single-family homes, with multi-flue and custom caps running $575-$1,900 depending on flue count and chase dimensions. We’re Emberly Chimney Cleaners, and we’ve inspected and repaired chimneys across Denton long enough to know that the black clay under this city cracks crowns faster than almost any other factor in North Texas. Call (980) 580-8641 and we’ll schedule a camera-scan inspection, write down exactly what we find, and hand you a written price before any work starts.
Why Emberly Chimney Cleaners Is Denton’s Preferred Chimney Cap & Crown Company
Denton homeowners call us because our entire inspection standard is built around showing you the evidence. Clause 4 of the Haven Standard requires a documented photo record on every job we run, and that’s been our default since 2009. When our tech lowers the camera down your flue and finds a hairline crack running through your crown, you see that crack on screen with your own eyes before we quote a dollar figure.
Corrine Halstead has run our operations with one non-negotiable rule: written price, written scope, and written warranty delivered before anyone touches your chimney. That’s Haven Standard Clause 1, and it’s why Denton homeowners who research first tend to land here. You won’t get a verbal estimate over the phone that doubles when the tech arrives. You’ll get a line-item price you can hold us to.
Every technician who shows up at a Denton door is background-checked and uniformed, and you’ll get a text when they’re on the way with their name and license info. No mystery crews, no subcontractor roulette. We inspect cap and crown conditions on every service call in Denton, because we know what the soil here does to masonry over a single season.
Our Chimney Cap & Crown Services in Denton
A damaged cap or crown isn’t cosmetic. In Denton, it’s a structural issue that lets rainwater into your flue, accelerates creosote buildup, and can quietly rot out the firebox masonry over the course of a couple of North Texas winters. Here’s what we actually do when we find problems.
Cap Installation
A missing or undersized cap means rain, birds, squirrels, and raccoons get the same access you do. In Denton’s older Craftsman bungalows near the Square, we regularly find chimneys that never had a proper cap installed, just whatever the last homeowner rigged up. We install multi-flue caps from Olympia Chimney and Copperfield, sized to your actual flue dimensions, not whatever fits from the truck.
Cap Replacement
Rust-through on a galvanized cap, mesh torn open by wind, or a cap that never fit right in the first place. We remove the old hardware, document the condition underneath, and mount a replacement rated for North Texas weather. If your cap is rusting out every few years, we’ll tell you why and spec a stainless steel replacement so you’re not doing this again in 2026.
Crown Repair
This is the big one in Denton. Expansive clay soil north and east of the Square shifts with every wet-dry cycle, and that movement transfers straight up the chimney stack. The result: cracked, spalling crowns and open mortar joints that let water run down through the flue. We reset damaged top courses, rebuild crowns with a proper drip edge, and seal everything with a Gelco crown coat. Not paint. Not caulk. A breathable elastomeric coat designed for masonry exposure.
Crown Coating
If your crown is structurally sound but showing fine cracking and surface spalling, a crown coat is the right move before it turns into a rebuild. We prep the surface, fill the cracks, and apply a Gelco crown coating that flexes with Denton’s seasonal soil movement instead of cracking against it. On older brick ranches in the 76201 and 76205 area, this is often the difference between a $500 repair now and a $2,800 rebuild in three years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Denton
Every cap and crown we install is backed by materials sourced from Famco, Copperfield, and Olympia Chimney, procured through Haven’s buying network to keep Denton customer pricing honest. We’re not locked into one manufacturer’s catalog. We spec what your flue actually needs, and we stock the common sizes locally so a straightforward cap replacement doesn’t turn into a two-week backorder.
Common Chimney Cap & Crown Problems We See in Denton Homes
- Expansive clay soil cracking crowns. Denton sits on some of the most active shrink-swell soil in North Texas, and older neighborhoods north and east of the Square see crown cracks reopen every single year. A crown that was sealed in 2023 can be cracked again by spring 2025, which is why we photograph everything and tell you what the fix’s realistic lifespan is.
- Rental fireplaces with zero maintenance history. The student rental stock around UNT and TWU turns over every 12 months, and chimneys in those homes routinely go years without anyone looking at the cap or crown. Rainwater pools in the firebox, creosote builds behind cracked flue tiles, and the first real freeze turns a maintenance issue into a chimney fire. We work directly with landlords who want a documented inspection before the next tenant moves in.
- Factory-built fireplaces with rusted chase covers. The 1990s and 2000s tract homes on Denton’s outer ring have prefab fireplaces capped with thin metal chase covers that rust through silently. Homeowners see gas logs and assume there’s nothing to maintain. There is. Rust streaks down the siding are the tell.
- Drafting reversals after winter dormancy. A cap that’s missing or a crown that’s cracked lets enough cold water into the flue to cool it, and when that flue sits dormant for months, the creosote lining it gets damp and sticky. Fire it up during one of Denton’s rare hard freezes and the draft can reverse, pushing smoke and carbon monoxide back into the living room. The February 2021 storm taught a lot of Denton homeowners that lesson the hard way.
Pricing for Chimney Cap & Crown in Denton, TX
Here’s what you’re looking at in the Denton market. A standard single-flue cap replacement runs $385-$625 including removal of the old cap and disposal. A multi-flue cap for older masonry chimneys near the Square runs $575-$1,150 depending on width and whether we’re custom-fabricating. Crown repair with full reset of the top courses and Gelco coating runs $540-$1,250 for most single-story brick ranches, and custom crowns on larger or taller stacks can push toward $1,900. A crown coating alone, where the structure is still sound, runs $450-$750. These are written ranges, not ballpark phone guesses. We’ll know your exact number after the camera goes down the flue and we see what we’re working with. Every quote is free, written, and yours to keep even if you hire someone else. Bring us a competitor’s written estimate and we’ll give you a free second opinion on it.
We Also Serve Cities Near Denton
Our Chimney Cap & Crown crews work throughout the Denton area, including Little Elm, Flower Mound, Frisco, and Lewisville. If you’re just outside the city line, call (980) 580-8641 and we’ll confirm coverage for your street. We schedule specifically for the north DFW metro so we’re not routing trucks from across the region.
Serving Denton, TX - Our Local Coverage Area
We’re based in the Denton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Denton
You can’t know from the ground, and anyone who says otherwise is guessing. Spalling shows as crumbling mortar, exposed aggregate, or pieces of crown on your roof or in the gutters. A cracked liner only shows up on camera. We run a camera down every Denton flue before quoting any repair, and we’ll show you the footage. If your crown is spalling but the liner is clean, we’ll tell you that, quote the crown work, and not upsell you a liner. Call (980) 580-8641 to schedule the inspection.
Yes, and it matters more in Denton because of the tenant turnover cycle. Every time a tenant moves out, a landlord looks at the fireplace once and moves on. Meanwhile, a missing or damaged cap lets water, nests, and debris accumulate in a flue no one is inspecting. When the next tenant fires it up on a cold night, the creosote and debris become a fire and CO hazard. A documented inspection with photos protects you as the owner, and our report is something you can file with the lease renewal. We know the rental stock around UNT and TWU well, including the older brick bungalows north of campus.
Sometimes. A custom-fabricated cap can improve draft by correcting flue height or by reducing wind-driven downdraft at the crown, especially on chimneys that sit below nearby rooflines or trees. But if the draft issue is coming from a partially collapsed clay tile liner or years of water damage in the smoke chamber, a cap won’t fix that. The camera answers it. In a Craftsman bungalow near the historic Square, we found a clay-tile flue with the crown split wide open at the corner. Our tech removed the spalling cap, reset the top two courses, and sealed the crown with a Gelco crown coat before fitting an Olympia multi-flue cap. The tenant had complained of drafting problems only after the first cold snap. The firebox had been collecting rainwater and creosote for at least eighteen months. That’s the difference between assuming and knowing.
Either one can cause air leaks, and a lot of Denton homeowners discovered both after February 2021. If your crown cracked during the storm’s freeze-thaw cycle, water intrusion and air movement follow the same path. A missing or loose cap does the same thing. We’ll inspect both during the same visit and show you the photos. If the crown is cracked but salvageable, we coat it. If it’s spalling badly, we rebuild it. You’ll see the evidence before you spend a dollar.
Everything. On a factory-built fireplace, the chase cover is the flat metal top that seals the wood-framed chase from weather, and the chimney cap sits on top of the vent pipe running through it. When the chase cover rusts through, water runs down inside the chase, onto the firebox, and through your ceiling chase pan. It’s the exact same failure mode as a cracked masonry crown, but homeowners miss it because the firebox still works. We source replacement chase covers from Copperfield, and we’ll show you the rust-through on camera before quoting anything.
Get Your Chimney Cap & Crown Inspected in Denton
If you live in Denton, you don’t need to guess whether your crown is cracked or your cap is doing its job. You need a camera down the flue and a written answer. Call Emberly Chimney Cleaners at (980) 580-8641 for a free estimate. We’ll show you what we find, put the price in writing, and stand behind the work with the 365-Day Done Right Promise. If it’s not done right, we make it right.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Denton under the Haven Standard.
Chimney Cap & Crown in Nearby Areas