Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Levittown
A chimney cap and crown replacement in Levittown typically runs between $340 and $1,900 depending on whether we’re installing a standard single-flue cap or rebuilding and coating a deteriorated crown. Most jobs are completed in a single visit once we’ve done the camera inspection and you’ve approved the written price. If you’re in Levittown and water is staining your ceiling near the fireplace or you can see cracked mortar from the ground, call (980) 580-8641 and we’ll schedule the Level 2 camera scan first, not after we’ve already started working.
We know these chimneys because they’re all essentially the same chimney. Levittown’s 17,000 homes went up in six years, and the identical straight-run flues and builder-installed mortar crowns are now 65 to 70 years old. When you call us about a rusted cap or a spalling crown in Stonybrook or Appletree, we know what we’ll find before we set the ladder. That’s not a guess. It’s the pattern.
Key Takeaways:
- Cap and crown work in Levittown runs $340-$1,900 with a written price before we start.
- Every visit includes a camera scan and a documented photo record, per Clause 4 of the Haven Standard.
- We don’t recommend any repair you can’t verify yourself on camera footage.
- Live phone support answers 24/7. Call (980) 580-8641.
Why Emberly Chimney Cleaners Is Levittown’s Preferred Chimney Cap & Crown Company
Homeowners around Levittown call us because the camera footage comes back first, the price comes second, and the work comes third. We’ve inspected and cleaned more than 38,000 chimneys since 2009, and every one of them had a written scope and written warranty delivered before a single brick was touched. That practice is Haven Standard Clause 1. It’s the whole reason the company exists.
Levittown customers take us up on the Free Second Opinion regularly. Someone brings a competitor’s written estimate, we pull the cap, run the camera down the flue, and show them whether that liner replacement was ever needed. In a town where 70-year-old homes share identical failure patterns, that second look has stopped thousands of dollars in unnecessary work. Corrine Halstead, who leads our field crews, insists on it: nothing gets recommended that can’t be documented and shown to you.
Dispatch is coordinated through our Philadelphia office, and crews serve Levittown neighborhoods directly. That means when we book a visit in Elderberry or Magnolia, the tech assigned knows the section’s original damper style and the cap fitment for that model before arriving. You get a text when they’re on the way, and the license number is on the page before you ever call.
Our Chimney Cap & Crown Services in Levittown
We handle the full scope of cap and crown work across every section of Levittown, but most calls in this town fall into four buckets. Here’s what each one involves.
Cap Installation in Levittown
New cap installation in Levittown runs $340-$620 for a standard single-flue stainless cap. For the original straight-run flues in Levitt & Sons houses, we size the cap to the flue’s exact inside diameter and draft needs, not just whatever’s on the truck. A cap that’s too tight on these chimneys traps condensation and creosote glaze. We stock Famco and Olympia Chimney caps specifically in the sizes these 1950s flues require.
Cap Replacement in Levittown
Cap replacement in Levittown runs $380-$700. The original stock caps on these houses were thin galvanized steel, and after 65 to 70 years of Bucks County freeze-thaw, they’re rusted through at the fasteners. We remove the old cap, inspect the crown underneath with the camera before we do anything else, and then install a replacement sized for the actual flue tile. If we find crown damage, you see it on camera before we recommend anything additional.
Crown Repair in Levittown
Crown repair in Levittown runs $450-$1,200 depending on how much of the original mortar crown has broken away. This is the most common service we perform in this town, and it’s not close. The builder-installed crowns from 1952 to 1958 were poured with a basic mortar mix, and decades of water intrusion have left them spider-webbed with cracks. We remove the loose material, form a proper wash with a slight slope away from the flue, and seal it with a crown coat that’s rated for repeated freeze-thaw exposure.
Crown Coating in Levittown
Crown coating in Levittown runs $300-$650 as a standalone service when the crown structure is intact but the surface is porous. It’s the right fix for a crown showing minor cracking and efflorescence but no structural loss. On a Jubilee model with hairline fractures across the crown, we clean the surface, fill the visible cracks, and coat the full surface. You get the before and after photos in your documented record.
BeforeAfterTrusted Brands We Service in Levittown
We don’t push one manufacturer for every house because a 1954 Cape Cod in Levittown has different draft characteristics than a modern lined home. That’s why we stock parts from Famco, Olympia Chimney, and Copperfield. The local inventory is kept specifically for the cap sizes and crown coatings that fit Levittown’s original flue tiles, which drops turnaround time to days for most customers in the 19054 and 19055 ZIP codes. If you need a custom cap fabricated for a flue that’s no longer a standard size, we can do that too.
Common Chimney Cap & Crown Problems We See in Levittown Homes
- Cracked builder-installed mortar crowns: The original crowns on Levitt & Sons chimneys from 1952 to 1958 are all the same age now. When one house on a block shows a spalled top course of brick, several more chimneys on that same block have the same hairline cracks starting. Freeze-thaw cycles in Bucks County make them widen every winter.
- Rusted stock caps with separated flue tile joints: The original caps were thin galvanized steel. Once they rust through at the fastener holes, water runs directly down the flue tile and into the joint at the top course. We find the top clay tile has separated on nearly every Pennsylvanian model we inspect.
- Improperly seated replacement caps on original straight-run flues: When a previous owner or handyman installed a cap meant for a different liner system, the draft changes. We see backdrafting into the living space and animals nesting in flues where a too-wide cap left a gap at the top.
- Efflorescence and moss on crown surfaces: Bucks County’s wet springs and humid summers encourage moss growth on crowns that already hold water. On the shaded side of a Magnolia section chimney, that moss roots into microcracks and widens them season by season. Corrine Halstead notes this is the single easiest visual cue that a crown coat is overdue.
Pricing for Chimney Cap & Crown in Levittown, PA
Here’s the honest range for Levittown. A standard single-flue cap installation runs $340-$620. Cap replacement runs $380-$700. Crown repair runs $450-$1,200 depending on how much of the original mortar has broken off. Crown coating runs $300-$650 when the structure is sound but the surface is porous. A custom cap for a non-standard flue or a multi-flue cap for a straight-run with two tile openings runs $600-$1,900. What moves the price is the crown’s condition, the flue’s actual inside diameter, and whether we need to form a new crown wash or just coat the existing one. Every price is written before work starts, and the Free Second Opinion on any written estimate is always available. Call (980) 580-8641 and we’ll give you a number you can hold us to.
We Also Serve Cities Near Levittown
If you’re in Philadelphia, Bethlehem, Pottstown, or Easton, our crews cover those markets too. But Chimney Cap & Crown in Levittown remains our deepest local specialization, because few towns have 17,000 chimneys all the same age with the same original design. If you’re outside the Levittown core and want a camera scan, call (980) 580-8641 to see if we have a crew in your area this week.
Serving Levittown, PA - Our Local Coverage Area
We’re based in the Levittown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Levittown
Because every chimney in Levittown was built within the same six-year window by the same builder using the same mortar mix and the same straight-run flue design. The crowns poured in 1953 are now 70 years old, and Bucks County’s freeze-thaw cycle has been working on each one for seven decades. The damage isn’t a house-by-house anomaly; it’s a community-wide pattern of aging masonry. If your crown is starting to show cracks, call (980) 580-8641 and we’ll confirm the extent with camera footage before recommending anything.
You can, but you shouldn’t, and we won’t install a cap on a Levittown house without first inspecting the crown as a policy. A new cap installed over a cracked crown doesn’t stop water intrusion; it hides it. On a Jubilee model in the Elderberry section, our crew pulled a rusted stock cap to find the original clay flue tile had separated at the top joint, letting water run down between the liner and brick until the crown was spider-webbed. We rebuilt the crown, installed a new Olympia Chimney multi-flue cap, and showed the homeowner the camera footage of the missing mortar before and the sealed crown after. If you’re only replacing the cap, you may be leaving the real problem untouched.
Yes, and this is where a lot of Levittown homeowners get upsold. The original straight-run flues in these Cape Cods and ranches have no stainless liner, and the draft characteristics are different from a modern lined system. A cap designed for a stainless liner can sit too tightly or too loosely on a raw clay tile flue, trapping creosote glaze or letting animals nest. We size Levittown caps to the inside diameter of the original tile, not to a modern liner spec, and we stock Famco caps in those specific sizes.
Because shade, wind exposure, and how the original owner used the fireplace all vary. A chimney on the north side of an Elderberry block holds moisture longer than one on the south side, so its crown deteriorates faster. A chimney that was used for wood fires has a different creosote pattern than one that always ran oil heat. Corrine Halstead sees this on nearly every block: two identical house models with identical flue tiles, but different water paths and different draft histories. The camera shows which one yours is.
Levittown sits in a mid-Atlantic freeze-thaw zone, and every winter water seeps into the microscopic pores of the original mortar crown. When temperatures dip below 32°F at night and rise above it during the day, that water freezes and expands, widening the pores into hairline cracks. Over 70 winters, those hairline cracks become water entry paths deep enough to spall the top courses of brick. It’s the single biggest reason we see so many crowns in Levittown that need full rebuilds rather than simple coating.
Get Your Written Price Before Any Work Begins
If you’re in Levittown and you suspect your cap or crown is failing, the next step is a camera scan, not a sales estimate. Call (980) 580-8641 and we’ll schedule a Level 2 inspection, run the camera down your flue, and show you exactly what’s there on video before we recommend anything. Corrine Halstead leads the field crews, and every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right. Written price, written scope, written warranty, and a documented photo record on every visit. That’s the Haven Standard, and it’s been our way of working since 2009.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Levittown under the Haven Standard since 2009.
Chimney Cap & Crown in Nearby Areas
