Chimney Cap & Crown in Farragut - Measured On Site, One Written Price

Fast, Reliable Chimney Cap & Crown Across Farragut

Chimney cap and crown work in Farragut typically starts around $275 for a standard cap replacement and runs up to $2,800-$3,900 for a custom multi-flue cap on a tall chase. Most Farragut homes built between 1982 and 2005 have factory-built fireplaces in exterior-wall chases, which means the cap and crown aren’t just cosmetic pieces: they’re what keeps rain, birds, and rust out of the metal firebox below. Our crews live and work in the Farragut area, and we know exactly what those 1990s chase enclosures look like after 30 years of Fort Loudoun Lake humidity. Call (980) 580-8641 and we’ll get a Level 2 camera inspection scheduled at your place along Kingston Pike, Concord Road, or anywhere else in Farragut.

Call (980) 580-8641

Key Takeaways

• Cap replacement in Farragut runs $275-$800 for standard single-flue units; custom multi-flue caps run $950-$3,900 depending on chase width and material.
• Farragut’s exterior-wall factory-built chases rust chase covers from the back seam, often before any leak shows indoors.
• Every job includes a written price, written scope, and the documented photo record required by Clause 4 of the Haven Standard.
• We inspect first with a camera, show you what we found, and never recommend cap or crown work without evidence you can see for yourself.

Why Emberly Chimney Cleaners Is Farragut’s Preferred Chimney Cap & Crown Company

We’ve built our reputation in Farragut on one practice most companies don’t do: we put a camera down every flue before we recommend a single dollar of work. That started in 2009 and became Clause 4 of the Haven Standard, and it’s why homeowners in Fox Den, Choto, and along Virtue Road call us when a chase cover is weeping rust or a crown is spalling onto the brick veneer. The camera shows exactly what’s happening inside the chase, and you keep every photo. No guesswork, no “it’s probably fine.” You see what we see.

Every tech who steps onto a Farragut property is background-checked and uniformed, with a license number you can verify. We text you when they’re on the way, and a live person answers the phone 24/7, including weekends when you finally get around to looking at that rust stain under the roofline. Corrine Halstead, who leads our operations, has made sure the entire crew understands what Farragut’s 1990s subdivision homes require: chase covers sized for tall enclosures, caps built for multiple flues sharing one chase, and crowns that aren’t just troweled over with a quick patch. We’re independently owned and operated under the Haven Standard, not a franchise. What that means for you: the person who schedules your appointment answers to the same standard as the person who climbs the ladder.

Our written price before work starts applies to every Farragut job. You get the scope, the material list, and the warranty in writing before anyone rafts a scaffold or unrolls a coil of metal. No “we’ll see once we’re up there” pricing. No call for a quote. Just a number in dollars, on paper, before the first tool comes off the truck.

Our Chimney Cap & Crown Services in Farragut

Cap Installation

A new cap on a Farragut factory-built fireplace does more than keep out rain. It also keeps starlings and squirrels out of the chase, which is a recurring problem in the subdivisions around Fort Loudoun Lake. For homes with a single flue, we install galvanized or stainless caps from Copperfield, sized to the exact inside diameter of the flue tile or factory pipe. For taller chases, we use a tension-fit or mechanically fastened cap rather than a slip-on, because Farragut’s ridgeline wind patterns will lift a poorly fitted cap off within two seasons.

Cap Replacement

Most cap replacements in Farragut happen because the original 1990s cap rusted through at the corners or was never sized correctly when the home was built. When a gas log set was retrofitted into a wood-burning factory fireplace, the original cap was often left in place, which is a venting mismatch: the gas exhaust volume is lower, so it doesn’t push through the old cap’s screening, and the flue stays damp. We replace with a cap matched to the current appliance configuration, not the original one. That means a gas-rated cap with proper screening density for gas combustion byproducts, not the wider mesh meant for wood smoke.

Crown Repair

Crowns on Farragut’s exterior-wall chases crack differently than crowns on true masonry chimneys. The tall chase enclosure flexes with freeze-thaw cycles in East Tennessee’s Ridge and Valley climate, and the crown material at the chase top takes that movement straight through the mortar joint or the poured concrete. When that happens, water tracks down the smoke chamber or into the metal firebox. We repair crowns with a flexible sealant rated for outdoor metal-to-masonry transitions, not a rigid mortar patch that will crack again by next spring. On homes where the brick veneer below the crown is already spalling, we note it in your photo record and quote the crown work and the veneer stabilization separately, so you know the full condition of what you’re looking at.

Crown Coating

For crowns that are still structurally sound but showing surface crazing or minor pocking, we apply a crown coating from Gelco or HeatShield. This is a flexible, water-shedding membrane that moves with the chase and seals hairline cracks before they become full crown failures. On Farragut’s 1980s-era chases where the original crown was poured thin over a metal pan, coating can buy five to eight years of service life before a full recrown is necessary. We tell you honestly when coating is enough and when the crown needs to be repoured, because we’re not going to coat a crown that’s already cracked through to the chase frame.

Before

After

Trusted Brands We Service in Farragut

We stock Copperfield caps and DuraFlex liners specifically for the factory-built and gas-converted fireplaces we see in Farragut every week. When a chase cover needs replacement, we order from Olympia Chimney to match the exact dimensions of the existing enclosure, because 1990s chase sizes from different builders don’t always match today’s off-the-shelf dimensions. For crown repair and resurfacing, we use Gelco and HeatShield products rated for metal-to-masonry transitions, which is what Farragut’s exterior-wall chases require. Because we order through the Haven buying network, we’re able to carry these materials without markup games, and your written estimate reflects the actual parts cost, not a padded line item.

Common Chimney Cap & Crown Problems We See in Farragut Homes

• Chase cover rust-through on exterior-wall chases from the 1980s-1990s. The back seam of the metal cover rusts first, where rain-water pools against the chase frame. By the time you see a stain on the ceiling below, the firebox has been taking water for months. Our Level 2 camera inspection shows you the corrosion before it becomes a tear-out.
• Oversized or missing caps on multi-flue chases. Farragut’s two-fireplace homes often have both flues exiting through one chase, and the original builder cap rarely covered both flues correctly. Rain and birds enter the unused flue, corroding the liner in the gas-converted fireplace in the next room. A single custom multi-flue cap fixes the problem at the top.
• Crown cracking around clay tile terminations where the tall chase meets the roofline. The Chase enclosure on many Farragut colonials stands 15 to 20 feet above the roof deck. Wind shear and freeze-thaw cycles concentrate stress at the top of the chase, right where the crown meets the flue tiles, causing spalling on the brick veneer below.
• Gas log retrofits without venting reconfiguration. A homeowner converts the family room fireplace to gas logs but keeps the original wood-burning cap and flue configuration. The cap screen clogs with gas soot, the flue stays damp, and the steel flue collar warps. We see this repeatedly in Farragut, more than in Knoxville’s older masonry neighborhoods, because Farragut’s housing stock is exactly the age when decorative fireplaces were first converted to gas convenience.

The Real Story Behind Farragut’s Factory-Built Chases

Farragut barely existed before its 1980 incorporation, and the town built out almost entirely through the 1990s and 2000s. That means the vast majority of its upscale homes contain factory-built zero-clearance metal fireplaces, not traditional brick masonry. Those metal units are now 25 to 45 years old, which is the end of their rated service life. Many were retrofitted with gas log sets without any venting reconfiguration, so the flue that was sized for wood smoke now carries a lower-volume, cooler gas exhaust. That combination, aging steel plus a venting mismatch, is far more prevalent in Farragut than in Knoxville’s older urban neighborhoods.

And here’s the part that matters for cap and crown work specifically: Farragut’s 1990s subdivisions, think the areas off Concord Road and Kingston Pike, put those factory-built fireplaces in exterior-wall chases. That was just the design convention of the era, but it has a physical consequence. The flue stays colder than an interior chimney, which means creosote from even light seasonal burning condenses and glazes on the flue walls as stage-two creosote. A homeowner who burns only a few cords a year in Farragut can develop the same glazing as someone burning three times that in an interior masonry chimney. The cap and crown are what protect that aging, glazed system from the outside, and when they fail, both problems compound. This isn’t advice lifted from a masonry chimney playbook. It’s the specific condition of Farragut’s housing stock.

We replaced a rusted chase cover and installed a custom multi-flue cap on a 1994 colonial off Concord Road where two factory-built fireplaces shared a single exterior chase. The homeowner had converted the family room unit to gas logs years earlier without a liner, and our Level 2 inspection showed a warped steel flue collar under a failed cap that was letting rain and a starling nest into the firebox. We fitted a Copperfield custom cap, sleeved the gas flue with DuraFlex, and re-secured the chase cover so both appliances now vent correctly, and the crown no longer weeps rust down the brick veneer.

Pricing for Chimney Cap & Crown in Farragut, TN

We Also Serve Cities Near Farragut

While this page focuses on Chimney Cap & Crown in Farragut, our crews also cover Memphis, New South Memphis, Nashville, and Knoxville. If you own a property in one of those cities and need cap or crown work, the same written-price guarantee and camera-scan documentation apply. We keep our Farragut scheduling line open 24/7, so call (980) 580-8641 and we’ll route your appointment to the nearest available crew.

FAQs, Chimney Cap & Crown in Farragut

Contact Emberly Chimney Cleaners in Farragut

If your Farragut home’s chimney cap is rusted, missing, or never sized for the fireplace you actually have in 2026, the first step is a camera scan we can both look at. Call (980) 580-8641 to schedule your Level 2 inspection. You’ll get a written price before any work starts, a documented photo record of everything we find, and a 365-Day Done Right Promise on the installation. Corrine Halstead and the rest of our Farragut crew answer the phone 24/7, and if you have a written estimate from another company, bring it to us for a free second opinion. We’ll show you what’s actually happening at the top of your chase, and we’ll put the fix in writing.

Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Farragut and the surrounding East Tennessee area.