Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Englewood
A chimney cap replacement or crown repair in Englewood typically runs $275-$475 for a standard single-flue cap installed, $650-$1,250 for a full crown rebuild with coating, and $1,100-$2,400 for custom multi-flue caps on older masonry chimneys. Most Englewood homes we visit were built between 1940 and 1965, and their chimneys show the specific wear patterns that come from coal-era construction later converted to gas. If you live near South Broadway, around the medical corridor, or in the brick ranch blocks east of Broadway, call (980) 580-8641 and we’ll put a written price in front of you before any work starts.
Our Chimney Cap & Crown team knows what a Chinook wind cycle does to a mortar crown at 5,400 feet. We document every recommendation with camera footage, not just a verbal warning. That’s the Emberly standard.
Key Takeaways:
- Cap replacement in Englewood: $275-$475 single-flue, installed
- Crown rebuild with coating: $650-$1,250 depending on chimney size and damage
- Custom multi-flue caps for converted coal chimneys: $1,100-$2,400
- Every job includes a written price, written scope, and camera-documented photo record
- Free second opinion on any written competitor estimate
Why Emberly Chimney Cleaners Is Englewood’s Preferred Chimney Cap & Crown Company
Emberly Chimney Cleaners has completed more than 38,000 chimney inspections and cleanings since 2009, and every single one has included a written price before work started and a documented record when it was done. That’s not a marketing line. It’s Clause 1 of the Haven Standard: written price, written scope, written warranty, delivered before anyone touches your chimney. Englewood homeowners in neighborhoods from Duncan Park to Belleview Acres tell us the same thing: they want to see the problem before they pay to fix it. We show them. Camera down the flue, photos on the report, no exceptions.
Corrine Halstead leads our team, and she built the inspection protocol around a simple rule: if we can’t show you the damage on camera, we don’t recommend the repair. That approach matters in Englewood, where older chimneys get flagged for expensive liner or crown work by companies that never put a camera in the flue. We serve Chimney Cap & Crown in Englewood with crews dispatched from our Denver office, and every tech arrives background-checked, uniformed, and with a license number you can verify before they walk in.
Live phone support runs 24/7. A person answers. Not a voicemail, not a web form. When you call (980) 580-8641, you get a straight answer about scheduling, pricing ranges, and what to expect on the visit.
Our Chimney Cap & Crown Services in Englewood
Cap Installation
Most Englewood chimneys we see either have no cap at all or a rusted hardware-store cap that’s too small for the flue. A properly sized stainless cap keeps rain, snow, birds, and downdrafts out of the flue. For a standard single-flue masonry chimney in Englewood, cap installation runs $275-$475 including materials and labor. We stock Famco and Copperfield caps in common sizes, so most installations happen in a single visit.
Cap Replacement
If your existing cap is rusted through, dented from hail, or pulled loose by wind, replacement is usually straightforward. The cost is the same range as installation: $275-$475 for single-flue, more for multi-flue. Englewood sits in the Front Range hail corridor, and we replace a surprising number of caps every year that got battered by spring and summer storms. A dented cap isn’t cosmetic. Once water gets under a damaged cap, it starts working on the crown beneath.
Crown Repair
The crown is the concrete or mortar slab that seals the top of the chimney around the flue tiles. In Englewood, crowns fail in a specific pattern: Chinook wind events swing temperatures 40-60°F in a single winter day, and that freeze-thaw cycling opens hairline cracks along the flue-tile perimeter. Those cracks let water into the clay liner and the top brick courses. Full crown rebuild with a proper bond break and flexible sealant runs $650-$1,250 on a typical Englewood ranch chimney. Patch jobs are cheaper short-term, but we’ll be honest with you about when a patch will hold and when it won’t.
Crown Coating
For crowns that are structurally sound but showing surface cracking, a sealed crown coating system can buy years before a full rebuild is needed. We typically recommend this on Englewood homes where the crown is intact but the surface has begun spalling or showing efflorescence. Coating runs $450-$800 depending on chimney size and prep work. This is one of the most common services we recommend on 1940s-1960s brick ranches in Englewood, because the original crowns were poured with mortar mix that was never designed for this climate.
Multi-Flue Cap
Coal-converted chimneys in Englewood often have two or three flues in a single stack: one for the furnace, one for the water heater, one for a fireplace. A custom multi-flue cap covers the entire crown and all flues with a single stainless assembly. This is the best solution for the oversized coal-era flue problem we see throughout Englewood’s older neighborhoods. Multi-flue caps run $1,100-$2,400 depending on stack dimensions and whether we need to fabricate a custom pan.
Custom Cap
When the chimney has an unusual footprint, missing brick, or flue tiles at uneven heights, a stock cap won’t seal correctly. We fabricate custom stainless caps to fit the actual chimney dimensions. This is common on Englewood bungalows where additions were made over the years or where the original cap was lost decades ago. Custom cap pricing starts around $850 and depends on size, material gauge, and mounting configuration. You’ll see the written quote before we order anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Englewood
We install and service caps, crowns, and related hardware from Copperfield, Famco, and DuraFlex. These aren’t just brands we pass through; we stock common sizes locally so Englewood customers aren’t waiting on a shipment from out of state. When a 13-inch terra cotta flue tile needs a cap adapter on a 1950s brick ranch near South Broadway, we usually have the part on the truck or available same-week. Materials are procured through Haven’s buying network, which keeps our customer pricing honest without cutting corners on steel gauge or sealant quality.
Common Chimney Cap & Crown Problems We See in Englewood Homes
- Chinook-driven crown cracking. A 40-60°F temperature swing in one winter day forces the crown to expand and contract faster than the mortar can handle. Cracks open along the flue-tile perimeter, and every freeze cycle widens them. We see this on Englewood crowns more than almost any other failure mode.
- Coal-era oversized flues on gas-only chimneys. A 12-inch or wider terra cotta flue tile now serving only a gas furnace runs too cool and too wet. Condensing exhaust attacks the crown’s underside and the top brick courses, creating efflorescence and spalling that loosens the cap over time.
- Washed-out mortar beneath the cap. Decades of water intrusion break down the mortar bed under the cap, leaving the cap loose and tilting. On Englewood ranch homes, we frequently find caps that can be lifted off by hand. That’s a sign the crown has been failing for years.
- Hail damage from Front Range storms. Englewood sits directly in the hail corridor that runs along the Front Range. Stainless caps dent, aluminum caps get destroyed, and crown coatings get pitted. A post-storm inspection is cheap insurance against a water-damaged flue liner.
On a mid-century brick ranch near South Broadway, we found a gas furnace venting into a 13-inch coal-era terra cotta flue with heavy efflorescence bleeding down the exterior brick and a crown cracked in a horseshoe pattern from repeated freeze-thaw. Our tech showed the homeowner chimney camera footage of the oversized flue and deteriorated crown, then installed a custom stainless multi-flue cap with a sealed crown coating to stop water intrusion and stabilize the stack. That’s the Englewood story in one chimney: oversized flue, aggressive condensation, and a crown that gave out years before anyone noticed.
Pricing for Chimney Cap & Crown in Englewood, CO
| Service | Typical Englewood Price Range |
|---|---|
| Single-flue cap installation | $275-$475 |
| Cap replacement (standard) | $275-$475 |
| Crown rebuild with coating | $650-$1,250 |
| Crown coating only | $450-$800 |
| Custom multi-flue cap | $1,100-$2,400 |
| Custom single-flue cap | $850-$1,500 |
What moves the price is chimney size, flue configuration, and how much crown prep the chimney needs. A small single-flue on a 1950s ranch will land at the bottom of these ranges. A three-flue coal-converted stack with a damaged crown will land higher. You’ll see the exact number in writing before we start, and that number won’t change unless we find something we show you on camera. Call (980) 580-8641 for a free estimate. Bring us a competitor’s written quote and we’ll give you a free second opinion on it.
Why Englewood Chimneys Need a Different Cap and Crown Approach
Englewood’s residential core is dominated by post-WWII brick ranch and bungalow homes built between roughly 1940 and 1965. Many of those chimneys were originally built for coal or solid-fuel burning and later converted to vent gas appliances. That conversion created a problem most newer suburbs like Highlands Ranch or Parker simply don’t have: the flue is too big for the appliance. A gas furnace venting into a 12-inch or wider coal-era flue never gets hot enough to push exhaust up and out efficiently. Instead, the exhaust cools inside the flue, condenses, and runs back down. That acidic condensate attacks the clay tile liner, the crown’s underside, and the top brick courses. The crown is the first thing to go, because it’s the thinnest structural element at the top of the stack.
Add Chinook wind cycles to that, and you get the specific failure pattern Englewood techs learn to spot in their first season: a crown cracked in a horseshoe pattern around the flue-tile perimeter, efflorescence ringing the top courses, and a cap that’s loose or missing entirely. In a climate-stable suburb, a crown might last 40 years. In Englewood, with freeze-thaw swings and oversized flues working together, 25 years is optimistic. That’s why we recommend crown coating and custom multi-flue caps more often here than in almost any other Denver-area market we serve.
None of this is a reason to panic. It’s a reason to know what you’re looking at. If your Englewood chimney has a gas furnace venting into an oversized flue, get a camera inspection before you spend money on a cap or crown repair. The footage will show you exactly what’s happening inside the flue, and we’ll walk you through what needs attention now versus what can wait.
We Also Serve Cities Near Englewood
Our chimney cap and crown services extend beyond Englewood to Littleton, Denver, Aurora, and Wheat Ridge. If you’re in one of those communities and dealing with a cracked crown or a missing cap, the same written-price standard applies. Call (980) 580-8641 and we’ll schedule a visit with camera documentation included.
Serving Englewood, CO - Our Local Coverage Area
We’re based in the Englewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Englewood
Your Englewood crown cracks more often because of Chinook wind events. At roughly 5,400 feet on the Front Range, Englewood experiences rapid downslope warming that can swing temperatures 40-60°F within hours on a single winter day. That aggressive freeze-thaw cycling opens hairline cracks in the crown along the flue-tile perimeter far faster than the more stable winter temperatures in Parker. Combined with Englewood’s older housing stock, the crowns here simply take more thermal punishment. Call (980) 580-8641 and we’ll show you the cracking on camera before recommending any repair.
Look for heavy white efflorescence bleeding down the exterior brick near the top, spalling on the crown’s underside, and a flue tile that’s 12 inches or wider while only serving a gas furnace or fireplace insert. Those are the coal-conversion tells we see throughout Englewood’s 1940s-1960s neighborhoods from Duncan Park to Belleview Acres. A camera inspection confirms it in minutes. We show you the footage, and we don’t recommend a cap or crown repair unless the camera evidence supports it.
Yes. Clause 4 of the Haven Standard requires a documented photo record on every job, and that includes the inspection that leads to a recommendation. If a company tells you your crown needs a $1,200 rebuild without putting a camera in the flue, get a second opinion. We run a camera down every chimney, show you the footage on-site, and hand you a written report with photos. Nothing is recommended without evidence you can see.
A custom stainless multi-flue cap is usually the best solution. It covers the entire crown and all flues with a single assembly, sealing the stack from rain and downdrafts while accommodating flue tiles at different heights. For a coal-converted Englewood bungalow with a 13-inch flue and a smaller gas flue side by side, a custom multi-flue cap prevents the water intrusion that accelerates crown failure. Pricing starts around $1,100, and you’ll see the written quote before we fabricate anything. Call (980) 580-8641 to schedule an inspection.
Yes. A cracked crown lets water into the chimney structure regardless of whether you burn fires. That water gets into the clay tile liner, the mortar joints, and the brick courses, and every Chinook freeze-thaw cycle forces the cracks wider. Even a fireplace that’s never used has a chimney that’s exposed to rain, snow, and thermal stress. A cracked crown on a 1960s Englewood ranch is doing damage every winter day, whether anyone notices or not. We’ll show you the extent of it on camera and tell you honestly if it can wait or needs attention now. Call (980) 580-8641 for a free estimate.
Get Your Englewood Chimney Cap and Crown Inspected
If you live in Englewood and your chimney cap is missing, your crown is cracking, or you suspect your coal-era flue is causing condensation problems, call (980) 580-8641. We’ll schedule a visit, put a camera down the flue, and show you exactly what we find. Written price before work starts. Documented photo record when it’s done. 365-Day Done Right Promise on every job. Corrine Halstead and the Emberly Chimney Cleaners team serve Englewood and the surrounding Denver metro with the same standard we’ve applied to every one of our 38,000+ inspections since 2009.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Englewood with camera-documented chimney inspections and the Haven Standard.