Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Clovis
A chimney cap and crown in Clovis typically costs $225-$650 for cap installation or replacement and $400-$1,200 for crown repair, depending on flue size and whether we’re dealing with a masonry chimney or a factory-built metal unit. Most jobs are completed in a single visit. We coordinate scheduling from our Fresno, Central Valley office, and our crews serve Clovis neighborhoods directly, including the subdivisions east of Willow Avenue and the older blocks near Historic Old Town Clovis. Call (980) 580-8641 for a written quote before any work starts.
The San Joaquin Valley Air Pollution Control District declares more winter no-burn days here than almost anywhere else in California. That’s not a footnote. It changes how caps and crowns fail in Clovis, and it changes when you should get them inspected.
Why Emberly Chimney Cleaners Is Clovis’s Preferred Chimney Cap & Crown Company
We’ve worked on thousands of Clovis chimneys, from the 1970s tract homes off Shaw Avenue to the 1990s and 2000s subdivisions that spread east toward the Clovis East High School area. The housing stock here is dominated by factory-built, zero-clearance metal fireplaces, and those units have specific cap and crown failure patterns we see repeatedly. The older blocks near Historic Old Town Clovis are different, with mid-century masonry fireplaces that often haven’t had a proper flue inspection in decades.
Our Chimney Cap & Crown team includes background-checked, uniformed technicians who arrive with a named tech assigned and a text sent when they’re on the way. That’s Clause 3 of the Haven Standard. After every job, you get a documented photo record, not a verbal summary. Corrine Halstead has led Emberly Chimney Cleaners since its founding in 2009, and the practice that defines the company, camera-scan documentation on every inspection, became Clause 4 of the Haven Standard. We don’t ask you to trust a diagnosis. We show you the footage.
Clovis homeowners aren’t impressed by longevity. They’re impressed by what can be shown. That’s why every estimate includes the photos, the written scope, and the written price before anyone touches a tool.
Our Chimney Cap & Crown Services in Clovis
Cap Installation
A new cap in Clovis generally runs $225-$450 for a standard single-flue unit. We stock materials from Gelco, Olympia Chimney, and Copperfield, sourced through Haven’s buying network to keep prices where they should be. The cap is the first line of defense against the valley’s winter rain and the birds and debris that come with living near Clovis’s mature tree canopy. Without a proper cap, tule fog moisture drops straight into the flue.
Cap Replacement
Cap replacement in Clovis runs $275-$550 for most homes. Mesh screens rust through faster here than you’d expect, because the prolonged damp of winter fog accelerates corrosion on exposed metal. In the subdivisions around Buchanan High School, we regularly replace caps on prefab fireplaces that have rusted through in under a decade. We’ll show you the old cap and the new one side by side before installation.
Crown Repair
Crown repair is one of the most frequently misdiagnosed services in the chimney industry, and Clovis is no exception. We see crowns that need legitimate repair, and we see crowns that just need waterproofing. A crown repair in Clovis typically runs $500-$1,200, depending on whether we’re patching hairline cracks or rebuilding a spalled crown. Summer heat over 105°F opens cracks in mortar that go unnoticed until the first winter fire, when fog and rain find their way into the smoke chamber. We only recommend repair when the camera footage shows structural cracking. If it’s surface wear, we’ll tell you a coating is enough.
Crown Coating
Crown coating runs $350-$650 in Clovis and adds years to a crown that’s functionally sound but showing surface erosion. We use waterproof coatings that stand up to the valley’s thermal cycling. It’s preventive work, not emergency work, and we’ll be straight with you about which one you actually need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Clovis
We work with caps and crowns from Olympia Chimney, Famco, and Copperfield, and we keep common Clovis sizes in stock for faster turnaround. When a Clovis homeowner has a rusted Olympia cap on a 1980s prefab fireplace, we can usually replace it same visit, no waiting on a distributor. If you have a custom or multi-flue setup, we source the part and give you the exact timeline in writing before we begin.
Common Chimney Cap & Crown Problems We See in Clovis Homes
- Tule fog moisture pooling under cracked crowns. The winter inversions that settle over the San Joaquin Valley floor keep moisture pressed against chimney masonry for weeks. That’s water inside your crown and flue, not just on it, and the damage compounds every year.
- Rusted-through prefab caps on 1980s-2000s tract homes. Factory-built metal fireplaces dominate most of Clovis, and their thinner caps rust faster in the valley’s damp winters. We see this constantly in subdivisions built during Clovis’s 1990s boom.
- Hard, glazed creosote blocking the draft. When SJVAPCD allows a burn after days of restrictions, Clovis homeowners often run fires hot and long. That cycle creates third-degree creosote that standard brushing can’t remove and that clogs cap mesh quickly.
- Summer thermal expansion cracking crowns before the burn season. 105°F-plus days in July and August stress the mortar. The hairline cracks opened during summer become water entry points by the time the first permitted burn arrives in December.
Pricing for Chimney Cap & Crown in Clovis, CA
- Cap installation: $225-$450 for single-flue, $450-$650 for multi-flue or custom
- Cap replacement: $275-$550, depending on material and flue configuration
- Crown coating: $350-$650
- Crown repair: $500-$1,200, based on crack depth and spalling extent
These ranges reflect Clovis’s housing mix, mostly prefab metal fireplaces with smaller flues, plus older masonry units near Old Town that sometimes need more extensive crown work. Every quote is written, itemized, and delivered before work begins. That’s Haven Standard Clause 1. If you have a written estimate from another company, we’ll give you a free second opinion on it. Call (980) 580-8641 and ask for Corrine’s team.
We Also Serve Cities Near Clovis
Beyond Clovis, our crews cover Fresno, Sanger, Madera, and Selma. If you’re in one of those cities and need chimney cap or crown work, the same written-price-before-work standard applies.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Clovis
Does the SJVAPCD no-burn rule affect how often I should have my chimney cap and crown inspected in Clovis?
Yes. Because Clovis homeowners can only legally burn on sporadic permitted days, the burning that does happen is often intense, which accelerates creosote buildup and cap screen clogging. We recommend an annual inspection before the first permitted burn of the season, not after. Call (980) 580-8641 to schedule yours, with a written price before we start.
Why does tule fog cause more crown cracking in Clovis than in nearby Fresno?
Clovis sits slightly lower in the valley floor and the fog pools harder here, keeping moisture pressed against chimney crowns for longer stretches. That prolonged saturation, combined with summer heat expansion, cracks crowns faster than in Fresno, which sits slightly higher and drains fog earlier. The result is that Clovis homeowners see spalling and moisture intrusion earlier than expected.
Can a custom cap help with draft problems during Clovis’s short burn windows?
A custom multi-flue cap can absolutely help, especially on the dual-exhaust setups common in Clovis’s newer homes. When you only get a few legal burn nights per month, the draft has to be right the first time. A properly sized cap with clean mesh keeps the airflow moving so smoke goes up the flue instead of back into the firebox. We size the cap to the flue, not to the box it came in.
What should I look for on my chimney cap after a summer of 105°F days in Clovis?
Look for rust blooming around the seams and mesh, and check whether the cap sits level or has shifted. Thermal expansion and contraction over repeated 100°F-plus cycles can loosen the cap’s attachment and warp thin metal. If you see brown staining, call us. We’ll camera-scan the entire flue and show you the footage before recommending anything.
How can I verify that my chimney crown actually needs repair and not just a coating?
Ask for camera footage of the crack depth and moisture intrusion. That’s the only honest way to tell whether a crown needs structural repair or just a waterproof coating. We include a camera-scan and photo record on every visit in Clovis under Haven Standard Clause 4. If the cracks are hairline and surface-level, we’ll tell you a coating is enough. If they go deeper, you’ll see it on the screen before you sign anything.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Clovis under the Haven Standard since 2009.
Need a chimney cap or crown inspected in Clovis? Call (980) 580-8641 for a free estimate. We’ll give you a written price, a written scope, and camera footage of exactly what’s happening up there before you pay a dime.