Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Camas
If your Chimney Cap & Crown has failed, you already know the signs: water in the firebox, rust streaks below the cap, a draft that pulls smoke back into the living room when the Gorge winds kick up. We replace and repair caps, crowns, and chase covers across Camas, from the downtown craftsman homes to the Prune Hill ridge-top subdivisions, with honest pricing on the page before anyone arrives. You’ll get a written quote, a camera record of what we found, and a documented job file when we’re done. Call (980) 580-8641 to schedule.
Why Emberly Chimney Cleaners Is Camas’s Preferred Chimney Cap & Crown Company
Camas homeowners call us because the wind here is not like it is across the rest of Clark County. The easterly Gorge winds gusting 40-plus miles an hour drive salt-laden marine air across the hillside chimneys year-round, and that changes what corrodes, how fast it corrodes, and what actually fixes it. We know that a galvanized chase cover on a 2004 zero-clearance fireplace in a Prune Hill subdivision will show seam rust within a decade, while the same cover in a sheltered downtown Camas lot might last fifteen years. That’s the kind of local knowledge that changes what we recommend and what we quote.
Our crews serve Camas regularly, not as an occasional trip. When you book with us, you get a named, background-checked technician, a text before arrival, and a written price before any work begins. Corrine Halstead leads our team, and the standard she set from the beginning is simple: camera down the flue, photos in the file, price on the table, work described in plain terms. That’s what we deliver on every Chimney Cap & Crown job in Camas, whether it’s a cracked crown on a 1920s downtown bungalow or a rusted chase cover on a ridge-top prefab.
Since 2009, we’ve inspected and cleaned over 38,000 chimneys, and every single one received a written scope before work started and a documented photo record when it ended. We don’t do flashlight inspections. We don’t ask you to trust a verbal diagnosis. We name what we found, show you the image, and quote you the price in writing. That’s Clause 4 of the Haven Standard, and it’s been our default since before anyone called it a standard.
Our Chimney Cap & Crown Services in Camas
Cap Installation
A missing or undersized chimney cap on a Camas hillside home is an open invitation for wind-driven rain. We install stainless-steel multi-flue and custom caps sized to the flue diameter and the wind exposure your roofline actually gets. On Prune Hill and other exposed ridge-top lots, we spec caps with stronger wind ratings than the standard inventory many shops carry, because a cap that works in a sheltered downtown Camas neighborhood may whistle or lift in a 40-mile-an-hour Gorge gust.
Cap Replacement
Galvanized caps and chase covers fail at the screw holes and seams first, usually within 10 to 15 years in Camas. The salt-laden air, the constant moisture, and the wind all work the metal until water gets through. We replace failed galvanized components with stainless-steel equivalents, and we seal the new cap with the proper fastener pattern so water doesn’t wick through new penetrations. If we can see rust when we photograph the cap, we’ll tell you whether it’s a five-year or a fifteen-year fix before we remove a single screw.
Crown Repair
Older masonry chimneys in downtown Camas, the early 1900s through 1950s stock around the mill-era neighborhoods, have crowns that take a beating from freeze-thaw cycles every wet winter. Hairline cracks open, water seeps in, and the crown starts spalling: little chips of cement and aggregate flaking away. We repair crowns that still have structural integrity by cleaning, bonding, and sealing the surface. Crowns that have lost their pitch or developed cracks through the full depth get rebuilt, not patched, because a half-measure on a Camas chimney just buys you one more winter.
Crown Coating
For crowns that are sound but porous, a flexible crown coating buys years at a fraction of a rebuild. We use materials from Gelco and Copperfield, applied after we clean and prep the surface. The coating fills the microscopic channels where moisture migrates, and on a Camas chimney with 44 inches of annual rain, that’s the difference between a crown that sheds water and one that absorbs it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Camas
When we replace a cap, chase cover, or crown component in Camas, we source from manufacturers whose products hold up in our climate: Copperfield and Famco for caps and chase covers, and we keep a stock of common Camas sizes on hand so a replacement doesn’t wait two weeks for a freight shipment. If we’re relining a flue during a cap replacement, we use DuraFlex or HeatShield, depending on the application. The point is not the brand name. The point is that the part we install is matched to the specific failure we documented, not whatever was on the truck that morning.
Common Chimney Cap & Crown Problems We See in Camas Homes
- Rusted-through galvanized chase covers on 2000s prefab fireplaces. The factory cover on a Prune Hill subdivision home, installed when the house was built, has been taking wind-driven salt air for 15 to 20 years. When the seams rust through, rainwater enters the chase, rots the framing around the flue, and shows up as water staining in the firebox below.
- Spalling and cracked crowns on 1920s-1950s downtown masonry chimneys. The original mortar-and-aggregate crowns were not built for 44 inches of rain and repeated freeze-thaw cycles. Hairline cracks become water channels, and the crown face starts flaking away within a few seasons.
- Wind-driven rain entering through missing or undersized caps on hillside prefab units. A standard 8-inch spark arrestor cap might be fine in a sheltered Vancouver lot. On an exposed Camas ridge-top, Gorge winds drive rain horizontally, under the cap hood, onto the damper and flue liner. We see rusted dampers with less than five years on them.
- Chase cover seams that hold water instead of shedding it. Many factory chase covers from the 2000s boom were installed with flat or inward-pitched pans. Water pools at the seams, rusts them from the outside in, and leaks even when the cap itself looks fine from the ground.
Pricing for Chimney Cap & Crown in Camas, WA
A standard stainless-steel cap replacement on a single-flue Camas chimney runs between $325 and $575, installed, depending on flue diameter and roof access. Crown repair with crack sealing and a flexible coating typically falls between $400 and $750 for a standard masonry crown. Full crown rebuilds, which Camas homes with extensive spalling often need, run $900 to $1,600. A chase cover replacement for a two-flue prefab unit, including removal of the rusted pan and installation of a stainless-steel replacement, runs $650 to $1,100. Multi-flue custom caps start around $800. Every quote is written and itemized before work starts, and you’ll see the camera photos that justify the recommendation. Call (980) 580-8641 for an exact written estimate.
We Also Serve Cities Near Camas
Our crews cover the full Clark County corridor and the broader Tacoma-Seattle region, including Vancouver, Puyallup, University Place, and Tacoma. If you’re in one of those markets and dealing with a rusted chase cover or a cracked crown, the same written-price, camera-documented standard applies. Dispatch and scheduling are coordinated from our Seattle office; the crews serving Camas live and work locally.
Serving Camas, WA - Our Local Coverage Area
We’re based in the Camas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Camas
Caps on Prune Hill and other exposed ridge-top lots rust faster because the easterly Gorge winds drive salt-laden marine air directly across the chimney at 40-plus miles per hour. Downtown Camas sits in the lee of the ridge, with less direct wind exposure, so the same galvanized cap lasts 15 to 20 years there compared to 8 to 12 years on the exposed hillside. The fix is not to buy another galvanized cap; it’s to install stainless steel, which holds up to the salt and wind exposure far longer. We photograph the rust, quote the replacement in writing, and install the right material the first time. Call (980) 580-8641 for a written quote on your specific roof exposure.
Sometimes, and we can tell you before we sell you a cap. Wind-driven backdrafting on a Camas hillside home can come from an undersized cap, a cap with the wrong wind band, or a chimney that is too short relative to the roof peak and wind direction. In some cases, a properly sized stainless-steel cap with a stronger wind band solves it; in others, the fix requires a flue extension or a draft-inducing cap. We camera-scan the flue, measure the draft during a windy visit if possible, and then give you a written recommendation. If a cap alone won’t fix it, we won’t sell you one. Call (980) 580-8641 to schedule an inspection.
Look for rust streaks running down the face of the chimney chase or water staining where the chase meets the roof. Inside, check the firebox for water marks or rust on the damper plate. On Prune Hill homes built between 2000 and 2010, we routinely find chase covers rusted through at the seams even when the visible top still looks intact from the ground. The only way to confirm is a visual inspection of the chase top, which we do with a camera on every visit. If it’s rusted, we’ll show you the photo and quote a stainless-steel replacement on the spot. Call (980) 580-8641.
It depends on the crack pattern and the depth of the cracking, and we’ll tell you either way. Hairline surface cracks on a sound crown can often be sealed with a flexible crown coating, which typically runs $400 to $750 in Camas. Cracks that run through the full depth of the crown, or crowns that have lost their slope so water pools on top, need a rebuild at $900 to $1,600. We don’t coat a crown that is structurally failing. We show you the camera image and let you make the call based on what you can see. Call (980) 580-8641 for a written diagnosis and quote.
Stainless steel, without exception. Galvanized steel cannot hold up to the combination of salt-laden Gorge winds, 44 inches of annual rain, and the persistent low-cloud moisture layer that keeps metal damp for months at a time. We install stainless-steel caps and chase covers from Famco and Copperfield on every exposed Camas hillside job, and we won’t quote a galvanized replacement for a ridge-top home because it just becomes a return visit in six or seven years. If you’re on Prune Hill, up in the Lacamas Shores area, or anywhere with direct Gorge wind exposure, spec stainless from the start. Call (980) 580-8641 for a written quote.
Get a Written Quote for Your Camas Chimney Cap or Crown
If you’re seeing water in the firebox, rust on the cap, or a draft that behaves badly when the wind comes out of the Gorge, we’ll come out, camera the flue, document what we find, and give you a written price before anyone touches a tool. No flashlight squinting. No vague “you might need” language. Just evidence, a number, and a work plan you can read. Call (980) 580-8641 to book your inspection, or ask for a Free Second Opinion on any written estimate you’ve already received from another company. We serve all of Camas, from the downtown mill-era neighborhoods to the ridge-top subdivisions on Prune Hill and beyond.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Camas, WA.