Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Bartlett
Chimney cap and crown work in Bartlett usually runs $225-$680 for a standard cap replacement and $175-$450 for crown repair or coating, depending on what the camera finds when we look. We serve every Bartlett neighborhood from Brunswick Road down to Yale Road, and scheduling a technician to your home is straightforward: call (980) 580-8641, and the first thing we’ll do is put eyes on the actual chimney, not guess from the ground.
What makes Bartlett different from older Memphis neighborhoods is simple: most homes here were built between the late 1970s and mid-1990s with factory-prefabricated fireplaces, not true masonry chimneys. Those units have a design lifespan of 20-30 years, which means a big share of Bartlett’s fireboxes and their associated caps and crowns are at or past end-of-life. That changes the nature of a “routine” cap or crown call in ways we’ll explain below. If you live in Bartlett and your chimney cap is rusted, missing, or your crown is cracked, this page is for you.
Key Takeaways
- Most Bartlett chimneys are prefabricated units from the 1980s and early 1990s, not masonry chimneys.
- A rusted cap or cracked crown on a prefab unit often signals deeper firebox or chase issues.
- Our camera-scan inspection (NFPA 211 Level 2) documents what we find before any price is quoted.
- We write the price, scope, and warranty before work starts. Every time. No exceptions.
- Call (980) 580-8641 for a free, in-person estimate in Bartlett.
Why Emberly Chimney Cleaners Is Bartlett’s Preferred Chimney Cap & Crown Company
Bartlett homeowners keep calling us because we show them the problem before we ask for a dollar. When we inspect a Chimney Cap & Crown issue, the camera goes down the flue or into the chase, and the footage goes on the report you keep. That’s Clause 4 of the Haven Standard, the inspection protocol we’ve worked under since 2009, and it’s why our customers in Bartlett don’t have to take anyone’s word for a $2,000 recommendation they can’t see.
Corrine Halstead leads our team, and she’s built the operation around one rule: written evidence or no work. When a Bartlett technician quotes you a crown coating or a multi-flue cap replacement, you’ll see the cracked mortar or rusted screen in the photos. You’ll get a written price, a written scope, and a written warranty before anything starts. That’s not our “policy.” That’s Clause 1 of the Haven Standard, have it in writing.
Our technicians are background-checked, uniformed, and arrive on a schedule we text you about in advance. You’ll know the tech’s name before they ring the bell. And when you call (980) 580-8641, a live person answers, 24/7.
Our Chimney Cap & Crown Services in Bartlett
We handle every Chimney Cap & Crown service a Bartlett home might need. Here’s what that looks like on the ground.
Cap Installation
New cap installation in Bartlett runs $225-$430 for a standard single-flue unit, installed and sealed. On the prefab fireplaces that dominate homes from St. Andrews to Blue Lagoon, we match the cap to the flue diameter and the existing chase top. If your home never had a cap, adding one is the single most cost-effective thing you can do to keep rain, birds, and tree debris out of your flue. We install Copperfield caps as our default; they hold up to Bartlett’s humid summers and freeze cycles better than thin-gauge hardware store caps.
Cap Replacement
Cap replacement in Bartlett typically runs $275-$680, with multi-flue caps on the higher end. This is the service we perform most often on homes built in the 1980s and early 1990s. The original caps installed at construction on these houses are almost uniformly failing now: rusted expanded-metal screens sagging into the flue, stem seams split, mounting brackets pulled loose by wind. Whole cul-de-sacs in neighborhoods like Williamsburg Estates and Shadowlawn have the same cap failure pattern because the original builder used the same cap on every house.
Crown Repair
Crown repair in Bartlett runs $275-$450, depending on the material and the damage. This is where Bartlett’s prefab housing stock changes the math. A masonry chimney crown is mortar you can patch. A prefab chimney crown is often a metal plate or thin concrete wash that warps and cracks at the seam where the cap stem meets the flue. Patch jobs on prefab crowns in Bartlett frequently fail within one season because the underlying metal has already fatigued. We’ll tell you when a crown can be repaired, and when patching one more time is throwing money at a unit that should be assessed for replacement.
Crown Coating
Crown coating in Bartlett runs $175-$450, and we use Gelco water repellent as our standard material. A proper crown coating is not paint; it’s a breathable sealant that repels water while letting moisture escape from the crown’s interior. On Bartlett’s humid summers followed by sharp freezes, an unsealed crown absorbs water that expands when it freezes, spalling chunks off the surface. Coating extends what’s left of the crown’s life, but it won’t fix a crown that’s already cracked through. We’ll show you the difference in the camera findings.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Bartlett
We install and service equipment from Copperfield, Gelco, Olympia Chimney, and Famco, so Bartlett homeowners get components sized and specified for their exact flue and chase configuration. When we quote a multi-flue cap from Copperfield or a Gelco crown treatment, that’s the brand going on your chimney; not a generic substitute. Because we stock the common sizes for Bartlett’s prefab-dominated market, we can often complete a standard cap replacement the same week we inspect.
Common Chimney Cap & Crown Problems We See in Bartlett Homes
- Rusted multi-flue caps on 1980s zero-clearance units. The expanded-metal screens deteriorate first, and once they sag they block the second flue entirely. Bartlett homes with two flues and one fireplace often have one flue feeding the firebox and one venting the chase; when the cap blocks the vent flue, airflow dies and the fire builds creosote fast.
- Prefab metal crowns cracked at the cap stem seam. Water runs down the inside of the chase and rusts the damper within a season. In subdivisions like Woodchase and Elmore Park, we see this failure across multiple houses built the same year by the same builder.
- Masonry wash crowns spalling from freeze-thaw cycles. Memphis-area ice storms force water into micro-cracks, and when it freezes, chunks of crown break away and fall into the flue liner. That falling debris can block draft and push smoke back into the house.
- Caps torn off or loosened by spring storm winds. Bartlett’s wide, flat suburban lots leave chimneys exposed to wind on all sides. A loose cap rattles, lets rain in, and eventually works its anchor screws out of the chase top. We re-anchor with proper stainless fasteners, not the original builder’s galvanized screws that corrode in humid air and turn brittle in cold snaps.
Why So Many Bartlett Chimneys From the 1980s Need This Work Now
Bartlett’s residential boom ran almost entirely from the late 1970s through the mid-1990s. Builders put up block after block of brick-veneer ranch and traditional-style homes, and nearly every one of those homes got a factory-prefabricated zero-clearance fireplace instead of a masonry chimney. Those units were designed to last 20-30 years. Do the math: a fireplace installed in 1985 is now 40 years old. A cap installed in 1985 is 40 years old. A crown installed in 1985 is 40 years old. Across Bartlett, thousands of these components are past end-of-life at the same time, which is exactly why we see the same cap and crown failures in whole subdivisions at once.
Recently we drove out to a home in Williamsburg Estates where the homeowner hadn’t burned in two seasons but called ahead of an ice storm. Our tech found the factory chimney crown spalled across its full width and the original multi-flue cap rusted through at the seams. On closer inspection, the 1988 zero-clearance firebox was cracked at the back wall. We replaced the cap with a Copperfield unit, coated the crown with a Gelco water repellent, and flagged the firebox for a Level 2 inspection before any future burn. That call started as a cap replacement and ended with a written assessment the homeowner could actually read. That’s how every Bartlett job should go.
When a Memphis-area ice storm forecast hits, call volume spikes overnight. Homeowners who haven’t lit a fire all year decide to use the fireplace, and many of those calls reveal exactly what we found in Williamsburg Estates: a system that can’t legally be swept and returned to service because the firebox itself has failed. If you’re calling before an ice storm and we tell you the unit needs more than a sweep, that’s not an upsell. It’s the only safe answer.
Pricing for Chimney Cap & Crown in Bartlett, TN
Here’s what Bartlett homeowners can expect to pay, in plain numbers.
| Service | Typical Bartlett Range | What Affects It |
|---|---|---|
| Standard cap installation | $225 - $430 | Flue size, chase top condition, access |
| Cap replacement (single flue) | $275 - $450 | Cap material, mounting repairs, screen type |
| Multi-flue cap replacement | $450 - $680 | Number of flues, chase top dimensions, custom sizing |
| Crown repair | $275 - $450 | Damage extent, material type, prep work |
| Crown coating | $175 - $450 | Crown size, surface prep, product applied |
These are installed prices, not “starting at” numbers that never materialize. The price we quote in writing is the price you pay. No surprise add-ons after the tech is already on your roof. If a competitor quotes you less, bring us their written estimate; we’ll give you a free second opinion under the Haven Standard. Call (980) 580-8641 to schedule an estimate.
We Also Serve Cities Near Bartlett
We work throughout the greater Memphis area and beyond. Our technicians serve Bartlett, Bartlett’s neighboring communities, Memphis, New South Memphis, Nashville, and Knoxville. Scheduling for Bartlett is coordinated through our metro office, and our crews handle Bartlett jobs locally, which keeps response times short and routes efficient.
Serving Bartlett, TN - Our Local Coverage Area
We’re based in the Bartlett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Bartlett
Because the homes were built with factory-prefabricated fireplaces during a concentrated construction boom, and those caps, crowns, and dampers all started aging at the same time. A 1985 cap and crown on a 1985 prefab unit are both past their design lifespan. Bartlett’s housing stock is unusually uniform in age, so the failures are uniform too, spread across entire subdivisions. Call (980) 580-8641 for an inspection if your home was built before 1995 and the original cap is still on it.
You can often repair or coat the crown on a 1985 prefab unit without replacing the entire fireplace, as long as the firebox and flue liner are still intact. The crown itself is a separate component. What you cannot safely do is keep patching a crown that’s failed because the underlying metal has warped or the cap stem seam has split. We’ll document the actual condition with the camera and tell you honestly which situation you have before any work is priced.
You’ll typically see a rim of ice bulging out of the cap’s screen mesh or a frost line along the crown surface with white, chalky residue where water has been soaking through. Inside, ice can cause the cap to lift slightly at the seam; once it thaws you may notice a rust stain running down the chase. If you notice any of this after an ice storm, call (980) 580-8641. We’ll inspect and show you the damage on camera before recommending anything.
Burning wet or unseasoned wood produces a low-heat, smoldering fire that creates heavy creosote and more water vapor. The vapor condenses on the cap screens and crown surfaces, accelerating rust and mineral buildup, especially in Bartlett’s humid climate. Over the course of one burning season, a wet-wood habit can coat a new cap with a sticky, acidic residue that shortens its life by years. Burn seasoned hardwood, and the cap and crown last longer. That’s not a sales pitch; it’s chemistry.
Because Bartlett ranches built in the 1980s often have two flues above one fireplace: one carries smoke, the other ventilates the chase around the prefab unit. Both flues need protection. A multi-flue cap covers both openings and allows the chase vent to keep air moving, which reduces moisture buildup and condensation inside the chase. If you have a single-flue cap on a two-flue system, the uncovered flue is feeding water and animals straight into the space around your firebox. Call (980) 580-8641 for a written quote, we’ll confirm your flue configuration on site.
Schedule Your Chimney Cap & Crown Inspection in Bartlett
Whether you’re in Williamsburg Estates, Shadowlawn, Elmore Park, or anywhere else in Bartlett, one phone call gets you a real inspection with a camera, a written price, a written scope of work, and a written warranty before anyone touches your chimney. Our 365-Day Done Right Promise covers the work after we leave; if it’s not done right, we make it right. Free second opinions on any written estimate are always available. Call (980) 580-8641 today and talk to a live person about what’s going on with your chimney.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Bartlett under the Haven Standard. Every job quoted in writing. Every job documented. Every time.