Fireplace Services in Schertz - Checked, Photographed, Then Priced

Chimney Cleaning in Schertz, TX

Chimney cleaning in Schertz, TX typically costs between $139 and $279 for a standard sweep with a Level 1 inspection, depending on flue condition, creosote buildup, and whether nests or blockages need removal. Most homes here were built after 1995 with factory-built zero-clearance fireplaces, which require technicians who understand prefabricated flue systems rather than traditional masonry. If you haven’t had your chimney swept in over a year or you’re hearing animal activity in the flue, call (980) 580-8641 and we’ll give you a written price before anything starts.

Call (980) 580-8641

Why Schertz Homes Are Different

Schertz’s housing stock is overwhelmingly tract construction from the mid-1990s through the 2010s, most of it built around master-planned developments near Randolph AFB and along the FM 3009 and FM 1518 corridors. These homes came with factory-built metal zero-clearance fireplace inserts, not masonry chimneys, which means the flue systems have manufacturer-specific clearance standards and prefabricated components that wear differently than brick and mortar. A technician who only knows traditional masonry will misdiagnose these systems.

The climate adds a second layer. Schertz averages fewer than 20 fireplace-use days per year, so chimneys sit idle for months at a time. That’s long enough for chimney swifts, starlings, and wasps to colonize uncapped flues. Then a blue norther slams through the I-35 corridor, temperatures drop 40 degrees overnight, and homeowners light fireplaces that have been dormant since the previous winter. The combination of animal debris, accumulated creosote, and a sudden cold-weather firing creates a real chimney fire risk in neighborhoods where houses sit close together.

Our Main Schertz Services

Two services dominate the calls we get from Schertz homeowners: fireplace diagnostics and chimney cap work. Both are shaped by the local housing stock and wildlife patterns.

Fireplace Services in Schertz

Most Schertz homes have zero-clearance prefabricated fireplaces that see only a handful of burns each year. When they stop drafting properly, smell smoky, or won’t light, the problem is usually a blockage, a warped damper, or a deteriorated refractory panel, not a masonry issue. We camera-scan the flue and the firebox to document exactly what’s failing. See Fireplace Services in Schertz for the full breakdown.

Chimney Cap & Crown in Schertz

Chimney swifts are a protected migratory bird under the Migratory Bird Treaty Act, and they nest in uncapped flues throughout Schertz from roughly April through October. An active nest can’t legally be disturbed, which means cleaning jobs sometimes have to pause mid-season. A properly fitted cap with appropriate screening prevents swifts, starlings, and wasps from entering in the first place. Here’s the detail on Chimney Cap & Crown in Schertz.

Before

After

Chimney Cleaning & Sweep in Schertz

Chimney cleaning in Schertz is not a casual maintenance item because these prefabricated flue systems collect creosote quickly on their few annual uses and sit dormant long enough for wildlife to move in. A standard Chimney Cleaning & Sweep here runs $139 to $279 with a Level 1 inspection included, and the most common surprise we find is an uncapped flue full of nesting material that was never visible from below.

Level 1 Inspection

Signs you need it

You use your fireplace fewer than 20 times a year, it’s been more than 12 months since the last service, and the flue is readily accessible with no known changes to the system.

What it costs in Schertz

A Level 1 inspection in Schertz runs $139 to $179 and is typically bundled with the annual sweep.

How we do it

We inspect the accessible portions of the flue, firebox, damper, and exterior stack, documenting everything with photos so you see exactly what we saw.

Creosote Removal

Signs you need it

You notice a strong campfire smell when the fireplace isn’t in use, or you see dark tarry buildup on the damper or firebox walls.

What it costs in Schertz

Creosote removal in Schertz runs $180 to $340 depending on density, with Stage 2 and Stage 3 glazed creosote at the upper end.

How we do it

We run rotary wire brushes and chemical treatment through the flue to remove creosote down to the liner surface, then camera-scan to verify the result.

Soot Removal

Signs you need it

You see fine black powder falling into the firebox or coating the damper, a sign of incomplete combustion in a prefab flue that has never been brushed.

What it costs in Schertz

Soot removal falls within the standard sweep range of $139 to $279, with heavier accumulations at the upper end.

How we do it

We brush the full flue length and vacuum the smoke chamber and firebox with HEPA equipment so nothing recirculates into your home.

What Chimney Cleaning & Sweep Costs in Schertz

How often should a chimney be swept in Schertz?

Every 12 months or after every cord of wood burned, whichever comes first. The dormant spring-to-fall stretch here means animals often move in between uses, so an annual sweep also clears nesting material before first burn.

What actually happens if I skip a sweep?

Creosote accumulates and can ignite above 2,000°F, while animal nests block exhaust and push carbon monoxide back into the house. Call (980) 580-8641 for a written quote, and we’ll camera-scan before anyone charges you anything.

Chimney Repair in Schertz

Chimney repair in Schertz shows up most often in the few masonry chimneys that exist and in the metal components of prefab systems that have been exposed to freeze-thaw cycles and moisture. Repair costs here range from $295 for minor mortar work to $1,500 for flashing replacement, and the repair pattern is directly tied to the region’s periodic freezing rain events rather than sustained cold. A full Chimney Repair assessment starts with a camera scan so you’re not guessing.

Mortar Repointing

Signs you need it

You see crumbling or missing mortar joints on the exterior chimney, and thin cracks let water soak into the brick during Schertz’s freezing rain events.

What it costs in Schertz

Mortar repointing in Schertz runs $295 to $950 depending on the square footage of joint work required.

How we do it

We grind out deteriorated mortar to proper depth, pack in fresh Type N mortar matched to your existing color, and photograph the finished joints.

Flashing Repair

Signs you need it

You have water staining on the ceiling near the chimney after rain, or you see corroded, lifted, or missing flashing where the chimney meets the roofline.

What it costs in Schertz

Flashing repair in Schertz runs $350 to $1,500 depending on access, roof pitch, and whether existing step or counter flashing can be reused.

How we do it

We remove the old flashing, install new step and counter flashing with proper weep drainage, and seal the transition with a high-grade roof sealant.

Chimney Waterproofing

Signs you need it

Your masonry chimney shows spalling brick faces or a white powdery efflorescence, indicating water has already entered the brick and mortar pores.

What it costs in Schertz

Chimney waterproofing in Schertz runs $400 to $1,200 for a full application over the exposed masonry surface.

How we do it

We clean the surface, repair any damaged mortar first, then apply a vapor-permeable silane-siloxane water repellent that lets the brick breathe while blocking water.

What Chimney Repair Costs in Schertz

Do I really need to repair this now, or can it wait?

If you see mortar crumbling, flashing lifting, or spalling brick, water is actively entering the structure and the damage accelerates with every freeze cycle. Small repointing jobs in Schertz run under $400; full rebuilds from neglected water damage start at $2,500.

What does a chimney repair inspection cost in Schertz?

The camera-scan inspection is included with any repair quote under the Haven Standard, so you’re not paying extra to find out what’s wrong. Call (980) 580-8641 and we’ll give you a written price before work starts.

Chimney Liner & Rebuild in Schertz

Chimney liner and rebuild work in Schertz is less common than in older cities because most homes have prefab metal flue systems rather than masonry chimneys, but when liners fail, they fail in specific ways. Stainless steel liner replacement in Schertz runs $2,500 to $7,500 depending on flue length and access, and the trigger is usually either a cracked clay tile on an older masonry chimney or a deteriorated prefab liner that’s rusting through from moisture. For the full scope of Chimney Liner & Rebuild work, we camera-scan first and show you the liner condition in real time.

Stainless Steel Liner

Signs you need it

Your masonry chimney has cracked or missing clay tile, or your camera scan shows gaps between tile sections that let heat and gases reach combustibles.

What it costs in Schertz

A stainless steel liner in Schertz runs $2,500 to $7,500 installed, with the spread driven by flue height and whether insulation is required.

How we do it

We measure the flue precisely, pull a new 316L stainless liner down the chimney, connect it at the appliance and top, and insulate as manufacturer specs require.

Flexible Liner

Signs you need it

Your existing prefab chimney has a damaged or undersized liner, and the flue path has bends that make rigid sections difficult to install safely.

What it costs in Schertz

Flexible liner systems in Schertz run $2,800 to $6,500 including new top plate, rain cap, and connector hardware.

How we do it

We pull a continuous flexible liner through the existing flue path, secure it at the termination point, and seal all connections before a final camera verification.

Partial Rebuild

Signs you need it

The top courses of your masonry chimney have spalled to the point where brick faces are missing, or the crown is so deteriorated that water is pouring into the flue cavity.

What it costs in Schertz

A partial rebuild in Schertz runs $1,800 to $3,500 depending on how many courses of brick need to be taken down and relaid.

How we do it

We remove deteriorated brick down to solid structure, install new flashing and a poured crown where needed, and relay the stack with matched materials.

What Chimney Liner & Rebuild Costs in Schertz

How do I know if my liner is actually bad?

You don’t guess. We run a camera down the flue and show you the footage. Cracked clay tiles, rust-through on metal, or gaps between sections are visible in under ten minutes, and you get the photo record with your written quote.

What happens if I ignore a cracked liner?

Heat and exhaust gases escape into the chimney cavity and can reach framing members or insulation. A new liner is always cheaper than the repair after a chimney fire. Call (980) 580-8641 for a free camera-scan estimate in Schertz.

Brands We Service in Schertz

We stock and install liners and components from Gelco, Olympia Chimney, and Copperfield, which means most Schertz jobs don’t wait on parts to ship. We keep common zero-clearance components and prefab flue sections at the metro office, so turnaround on liner and cap work is typically measured in days, not weeks. See our brands for the full materials list.

Pricing for Chimney Cleaning in Schertz, TX

Neighborhoods We Serve in Schertz

We work throughout Schertz and the surrounding master-planned developments near Randolph AFB and the FM 3009 corridor. Typical scheduling for a chimney sweep in Schertz runs about three to five business days out, with earlier slots available when someone cancels.

• Belmont Park
• Carolina Crossing
• Savannah Square
• Ashley Place
• Fairways at Schertz

Service Area - Cities Near Schertz

We also cover the communities around Schertz, including Universal City, TX, Cibolo, TX, Converse, TX, and New Braunfels, TX. Dispatch runs from the San Antonio metro office, with local crews scheduled for Schertz jobs throughout the week.

FAQs About Chimney Cleaning in Schertz