Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Redondo Beach, CA
Chimney cleaning in Redondo Beach usually runs $189 to $329 for a standard sweep with a Level 2 camera inspection, and the salt air here changes what we find inside the flue. Most Redondo Beach chimneys don’t have heavy creosote buildup because homeowners burn so few fires each year. What they have instead is rust: seized dampers, corroded chase covers, and mortar joints softened by months of marine-layer moisture. Call (980) 580-8641 for a written quote before anyone starts work.
Why Redondo Beach Homes Are Different
Redondo Beach’s direct Pacific Ocean frontage means salt-laden marine air is the dominant chimney enemy here, corroding steel dampers, chase covers, and flashing far faster than in inland South Bay cities like Torrance or Hawthorne. Because the mild coastal climate keeps most homeowners from burning more than a handful of fires per year, technicians encounter seized rust-locked dampers and moisture-driven mortar spalling far more often than significant creosote buildup. North Redondo is heavily populated with post-WWII tract homes built in the 1950s and 1960s, many retaining their original brick masonry fireplaces designed for ambiance rather than heat. South Redondo closer to the Esplanade has older Craftsman and Spanish Colonial-style homes where decades of salt-air exposure on minimally-used flues has quietly degraded metal components and mortar joints. Redondo Beach’s temperatures rarely dip below 50°F in winter, so fireplaces sit idle for months at a stretch, long enough for moisture to accumulate inside flues without the drying effect that regular burning would provide.
We see one scenario more than any other in Redondo Beach: a homeowner tries to light a fire on one of the few genuinely cold December evenings, and the damper will not open. It has been rusted shut for years, never actually opened, and the living room fills with smoke. That call comes in during the first cold snap every year.
Our Main Redondo Beach Services
Chimney cleaning is the job most Redondo Beach homeowners call us for first, but fireplace service and cap-and-crown work are close behind because of what the salt air does to metal components. Here are the two services with their own dedicated Redondo Beach pages:
Fireplace Services in Redondo Beach
Fireplace service in Redondo Beach means working around rusted dampers, corroded gas lines, and fireboxes that have been dormant for months at a stretch. In North Redondo’s 1950s tract homes, the original wood-burning fireboxes often have cracked refractory panels. We inspect, clean, and repair the full fireplace system, including the gas log sets and ignition components that coastal moisture attacks. Fireplace Services in Redondo Beach covers the details, including gas valve and thermocouple work.
Chimney Cap & Crown in Redondo Beach
Chimney caps and crowns are the first line of defense against Redondo Beach’s marine layer, and they fail here faster than almost anywhere in the South Bay. A rusted-through chase cover or a crown with hairline cracks lets moisture into the flue every single night the fog rolls in. We install stainless steel and copper caps from Gelco and Olympia Chimney, and our crown repairs are sealed with a waterproof membrane. Chimney Cap & Crown in Redondo Beach has more on materials and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cleaning & Sweep in Redondo Beach
Chimney cleaning and sweeping in Redondo Beach usually costs $189 to $329, and the job here is less about creosote removal than it is about dealing with moisture and rust in the flue. Homes in North Redondo’s 1950s tract developments and South Redondo’s older Craftsman bungalows both have flues that sit damp and dark for most of the year, which means we’re often pulling corrosion flakes and deteriorated mortar out of the smoke chamber on a standard sweep. Chimney Cleaning & Sweep is the full service line, and in Redondo Beach we include a camera-scan Level 2 inspection on every visit because the salt air hides damage you cannot see from the firebox.
Level 1 Inspection
Signs you need it
You can see flaking rust or white efflorescence on the firebox walls, or you want to confirm the damper even opens before your first fire of the season.
What it costs in Redondo Beach
A Level 1 inspection in Redondo Beach runs $125 to $175, and we do it as part of any sweep.
How we do it
We inspect the firebox, damper, smoke chamber, and visible flue from the roofline, then give you a written report with photos.
Level 2 Inspection
Signs you need it
You just bought the home, you had a chimney fire, or earthquake season has you wondering about the flue’s structural condition.
What it costs in Redondo Beach
A Level 2 camera inspection in Redondo Beach costs $225 to $300, and it is included free with every sweep.
How we do it
We run a video camera down the full flue length, document every foot with still images, and hand you the complete photo record.
Creosote Removal
Signs you need it
You smell a sharp, smoky odor near the fireplace even when it has not been used in weeks, or you see black, shiny deposits on the damper.
What it costs in Redondo Beach
Creosote removal in Redondo Beach runs $250 to $450 depending on the glaze class, which is rare here but does appear in seldom-used, moisture-heavy flues.
How we do it
We use rotary wire brushes and chemical treatments to break down hardened glaze, then vacuum the full system with HEPA filtration.
Soot Removal
Signs you need it
You see gray-black powder sifting into the firebox, or the damper has a thick layer of soot that flakes when touched.
What it costs in Redondo Beach
Soot removal is included in the standard Redondo Beach sweep price of $189 to $329.
How we do it
We brush the flue from top and bottom, remove soot from the smoke chamber and damper assembly, and leave no dust in the home.
Annual Sweep
Signs you need it
It has been more than 12 months since the last cleaning, or you are preparing for the first burn of the season.
What it costs in Redondo Beach
An annual sweep in Redondo Beach costs $189 to $329, and includes the Level 2 camera inspection and written photo report.
How we do it
We run a mechanical brush through the flue, clean the damper and smoke shelf, inspect the full system by camera, and write up what we found.
What Chimney Cleaning & Sweep Costs in Redondo Beach
| Item | Typical range in Redondo Beach |
|---|---|
| Standard sweep with Level 2 camera inspection | $189 - $329 |
| Level 1 inspection (standalone) | $125 - $175 |
| Creosote glaze removal | $250 - $450 |
How often should I have my chimney swept in Redondo Beach?
Once a year, even if you burn only a handful of fires, because the salt air and marine layer are degrading the metal components regardless of use. Annual inspection catches rust before it becomes a seizure. Call (980) 580-8641 to schedule.
Do I need a chimney sweep if I never use my fireplace?
Yes. In Redondo Beach the flue is still collecting moisture, rust, and nesting material even when the fireplace sits cold. A damp, unused flue often needs more attention than a well-used one. Call (980) 580-8641 for a free estimate.
Chimney Repair in Redondo Beach
Chimney repair in Redondo Beach usually runs $300 to $900 for a typical mortar repointing job, but salt-air rust can push flashing and damper repairs higher. Homes in South Redondo’s older Craftsman and Spanish Colonial neighborhoods frequently need repointing on chimneys that have been absorbing ocean moisture for decades, while North Redondo’s 1950s brick chimneys often show spalled faces from repeated fog-and-sun cycles. Chimney Repair covers the full range, and we quote every job in writing before work starts.
Mortar Repointing
Signs you need it
Mortar joints are crumbling, eroded more than a quarter-inch, or you can scrape them loose with a key.
What it costs in Redondo Beach
Repointing in Redondo Beach typically runs $300 to $900 depending on how many courses of brick need work.
How we do it
We grind out deteriorated mortar to an even depth, then pack in fresh Type N mortar matched to the home’s original color.
Spalling Brick Repair
Signs you need it
Brick faces are popping off, leaving rough recessed patches on the chimney’s exterior.
What it costs in Redondo Beach
Spalling brick repair in Redondo Beach runs $600 to $1,200 for a typical chimney face.
How we do it
We remove the failed brick, replace any damaged units, and re-secure or rebuild the affected section to match the original bond.
Chimney Waterproofing
Signs you need it
You see white efflorescence on the brick, or water streaks inside the firebox after rain.
What it costs in Redondo Beach
Waterproofing in Redondo Beach runs $350 to $650 for the standard chimney.
How we do it
We apply a vapor-permeable silane/siloxane waterproofing membrane that blocks liquid water but lets the brick breathe.
Flashing Repair
Signs you need it
You have water staining on the ceiling near the chimney, or the flashing has visible rust, lifting, or cracked sealant.
What it costs in Redondo Beach
Flashing repair in Redondo Beach runs $500 to $1,000, and salt corrosion often means full replacement rather than patching.
How we do it
We remove the old flashing, install new step and counter flashing with proper overlap, and seal the entire intersection.
Chimney Rebuilding
Signs you need it
The chimney is visibly leaning, has bricks missing in multiple locations, or structural cracks wider than a quarter-inch.
What it costs in Redondo Beach
Chimney rebuilding in Redondo Beach starts around $2,500 and runs up from there based on height and access.
How we do it
We tear down the failed section, rebuild with new brick and code-compliant materials, and document every stage with photos.
What Chimney Repair Costs in Redondo Beach
| Item | Typical range in Redondo Beach |
|---|---|
| Mortar repointing | $300 - $900 |
| Spalling brick repair | $600 - $1,200 |
| Flashing repair | $500 - $1,000 |
Does salt air really damage chimney flashing that fast?
Yes. Redondo Beach’s onshore marine air oxidizes ferrous flashing components at a rate substantially higher than inland South Bay cities. We often replace flashing that is only eight to ten years old. Call (980) 580-8641 for an inspection.
Can I just repoint the bad spots instead of rebuilding?
Sometimes. If the brick itself is intact and only the mortar is failing, repointing is enough. If bricks are spalling or the structure has shifted, patching will fail again. Call (980) 580-8641 and we’ll show you the camera footage.
Chimney Liner & Rebuild in Redondo Beach
Chimney liner installation in Redondo Beach typically runs $2,000 to $4,500 for a stainless steel liner in a standard two-story home, with full rebuilds starting around $6,000. The marine layer accelerates liner corrosion here, especially on older clay tile liners that have been absorbing salt-laden moisture for decades in South Redondo’s Craftsman-era flues. Chimney Liner & Rebuild covers the full scope, and we source materials from DuraFlex and HeatShield, procured through the Haven buying network specifically to keep customer prices honest.
Stainless Steel Liner
Signs you need it
Your clay tile liner is cracked, missing sections, or the camera inspection shows gaps between tiles.
What it costs in Redondo Beach
A stainless steel liner in Redondo Beach runs $2,000 to $4,500 installed, depending on flue height and access.
How we do it
We size the liner to the flue, lower it from the top, insulate the annular space, and connect to the appliance with a proper top plate and cap.
Flexible Liner
Signs you need it
Your flue has offset bends that a rigid liner cannot navigate, or you want to preserve the original brick chase.
What it costs in Redondo Beach
Flexible liner installation in Redondo Beach runs $2,000 to $4,500, comparable to rigid stainless.
How we do it
We feed the flexible liner through the existing flue path, secure it at top and bottom, and verify the full run by camera.
Liner Replacement
Signs you need it
The existing liner is rusted through, pieces of clay tile are falling into the firebox, or the camera shows structural deterioration.
What it costs in Redondo Beach
Liner replacement in Redondo Beach runs $2,500 to $5,000 when we have to remove the old liner first.
How we do it
We remove the failed liner, clean the flue cavity, and install the new liner with full documentation and a written warranty.
Partial Rebuild
Signs you need it
The chimney’s top section above the roofline is damaged, but the lower structure is solid.
What it costs in Redondo Beach
A partial rebuild in Redondo Beach starts at $2,500 to $4,000 for the typical roofline-to-crown section.
How we do it
We support the roof, tear down the damaged section, rebuild with new brick and crown, and install a new cap.
Full Chimney Rebuild
Signs you need it
The chimney has structural cracks, leaning, or damage throughout the full height from firebox to crown.
What it costs in Redondo Beach
A full chimney rebuild in Redondo Beach starts around $6,000 and runs higher based on height, access, and brick type.
How we do it
We tear down the entire structure, rebuild from the firebox up with code-compliant materials, and deliver a documented photo record of every stage.
What Chimney Liner & Rebuild Costs in Redondo Beach
| Item | Typical range in Redondo Beach |
|---|---|
| Stainless steel liner | $2,000 - $4,500 |
| Liner replacement | $2,500 - $5,000 |
| Full chimney rebuild | $6,000+ |
Do I really need a new liner, or can I just keep using the old one?
If the camera shows cracked tiles, gaps, or rust-through, the liner is no longer containing combustion gases. In Redondo Beach’s salt air, a compromised liner gets worse every year. Call (980) 580-8641 and we’ll show you the footage before you spend anything.
How long does a stainless liner last near the ocean?
Corrosion-resistant stainless liners hold up well in coastal conditions, often 20 years or more. The key is proper insulation and a sealed top plate to keep marine air from condensing inside. Call (980) 580-8641 for an exact quote.
Brands We Service in Redondo Beach
We stock and service chimney components from Gelco, Olympia Chimney, Famco, and Copperfield, with common caps, dampers, and liner parts available locally for Redondo Beach jobs. Our brands page shows the full lineup, and parts sourced through Haven’s buying network arrive fast without the coastal markup.
Pricing for Chimney Cleaning in Redondo Beach, CA
| Service | Typical range in Redondo Beach |
|---|---|
| Standard sweep with Level 2 camera inspection | $189 - $329 |
| Level 1 inspection (standalone) | $125 - $175 |
| Creosote glaze removal | $250 - $450 |
| Mortar repointing | $300 - $900 |
| Spalling brick repair | $600 - $1,200 |
| Flashing repair | $500 - $1,000 |
| Stainless steel liner | $2,000 - $4,500 |
| Liner replacement | $2,500 - $5,000 |
| Partial rebuild | $2,500 - $4,000 |
| Full chimney rebuild | $6,000+ |
The biggest price push in Redondo Beach is salt-air corrosion on flashings, dampers, and chase covers, which often means replacement rather than repair. The second is access: many South Redondo homes have tight roof lines and chimneys that are difficult to stage. Every job receives a written price before work starts, and that price is the price you pay.
Neighborhoods We Serve in Redondo Beach
We work throughout Redondo Beach, from the tract homes of North Redondo to the older Craftsman and Spanish Colonial stock near the Esplanade. Crews dispatch from our Los Angeles office and serve the city locally.
- North Redondo Beach
- South Redondo Beach
- The Esplanade
- Riviera
- Golden Hills
Service Area - Cities Near Redondo Beach
Emberly Chimney Cleaners also serves the neighboring South Bay cities. If you’re in Hermosa Beach, CA, Torrance, CA, Manhattan Beach, CA, or Lawndale, CA, we can schedule a sweep or inspection with the same written-price policy and camera documentation.
Serving Redondo Beach, CA - Our Local Coverage Area
We’re based in the Redondo Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Redondo Beach
We schedule most Redondo Beach sweeps within a few business days, and we answer the phone live around the clock. Seasonal volume picks up before the first December cold snap, so calling ahead of the first burn is the surest way to get on the calendar. Call (980) 580-8641.
Most cleaning and repair work does not require a permit, but full rebuilds or structural changes may. We handle the paperwork and confirm with the city when a permit applies to your job. Call (980) 580-8641 and we’ll tell you what your project requires.
Several Redondo Beach homeowner associations have guidelines about exterior chimney color and cap style, especially in the Riviera and Esplanade areas. We match brick and mortar to the existing look and can provide spec sheets for HOA review. Call (980) 580-8641 before scheduling.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redondo Beach Customers Say
"Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F.