Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Nashville, TN
Chimney cleaning in Nashville typically runs $180-$340 for a standard sweep with a Level 1 inspection, and most jobs are done in about 90 minutes. What makes Nashville different is the housing stock: thousands of 1920s-1940s craftsman bungalows in neighborhoods like East Nashville, Sylvan Park, and Germantown still run their original masonry flues, and our freeze-thaw winters plus nearly 50 inches of annual rain push moisture into those old chimneys harder than almost anywhere in the region. If you’ve just bought a renovation flip or you’re prepping a short-term rental for the next booking wave, call (980) 580-8641 and we’ll put a camera down the flue before anyone quotes you a dime.
Why Nashville Homes Are Different
Nashville’s inner ring is dense with pre-war masonry chimneys that sat dormant for decades while gas appliances vented through them. That matters because gas exhaust leaves sulfur and condensate deposits baked onto the brick, and when a new owner wants to burn wood again, those deposits interact with creosote in ways a visual sweep alone won’t catch. The outer ring built in the 1980s-2000s is the opposite problem: factory-built zero-clearance fireplaces and gas log inserts that need a completely different cleaning protocol than a 1930 brick flue.
The climate works against you here. Temperatures cross the freezing line repeatedly through a Nashville winter, and that expansion-contraction cycle spalls soft common brick and cracks mortar joints. Add 50 inches of rain and high summer humidity, and moisture gets into the flue, saturates creosote, and accelerates liner corrosion. In East Nashville specifically, the renovation-flip wave has exposed a recurring hazard: original chimneys from the 1920s and 1930s were often never lined, then had gas appliances vented into them for 40-plus years. A new buyer who wants a working fireplace is facing a serious fire risk until a proper stainless liner goes in. We flag that on the first visit, not after a chimney fire.
Our Main Nashville Services
Most Nashville homeowners reach out to us about two things beyond the routine sweep: getting a fireplace restored to working order, or stopping the water damage that announces itself as a crumbling crown or missing cap. Here’s what each involves in this city.
Fireplace Services in Nashville
Nashville’s short-term rental market means fireplaces in East Nashville and Sylvan Park often get used heavily by guests who’ve never operated a damper correctly. We pull the gas logs, inspect the firebox and refractory panels, and run the Level 2 camera scan that Nashville insurance providers are increasingly asking for between rental seasons. You get a photo record of everything we found, and a written price for any repair before we touch it. See Fireplace Services in Nashville for the full breakdown.

Chimney Cap & Crown in Nashville
A cracked crown or missing rain cap in Nashville is an emergency in slow motion. The region’s rain volume and freeze-thaw rhythm will push water into the brickwork within a single winter, and the interior damage compounds every year it’s ignored. We replace crowns, install caps with proper screening for Nashville’s chimney swifts, and document every repair with before-and-after photos. Details are on the Chimney Cap & Crown in Nashville page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cleaning & Sweep in Nashville

A chimney sweep in Nashville is the baseline service that keeps a fireplace safe and insurable, but the pre-war masonry stock here means we’re often the first people to lay eyes on a flue that hasn’t been touched since the gas line went in. When a homeowner in East Nashville or Sylvan Park wants to switch back to wood burning, our first job is to test whether that flue can actually handle it. The camera scan tells us what a brush alone never will. That’s our Chimney Cleaning & Sweep approach in one sentence: clean it, film it, write down what we found.
Level 1 Inspection
Signs you need it
You use the fireplace regularly and nothing has changed, but you haven’t had eyes on the interior of the flue in over a year.
What it costs in Nashville
In Nashville, a Level 1 inspection is included with a standard sweep, which runs $180-$340.
How we do it
We examine the firebox, damper, and accessible flue interior, then document everything with photos and note any creosote classification or early spalling.
Level 2 Inspection
Signs you need it
You just bought the home, you’re switching fuel sources, or an inspection is required by your insurer before they’ll write the policy.
What it costs in Nashville
A Level 2 inspection in Nashville typically ranges from $300-$600, depending on flue length and whether the home has multiple fireplaces.
How we do it
We run a full camera scan from the firebox to the flue cap, then give you a written report with images and plain-language notes on every finding.
Creosote Removal
Signs you need it
You see a dark, tar-like glaze inside the firebox, or the last burn season produced thick smoke that hung in the room.
What it costs in Nashville
Heavy creosote removal in Nashville adds $80-$150 to the base sweep when glazing is present.
How we do it
We classify the creosote stage first, then use rotary loops or chemical treatment depending on whether it’s Stage 1 flake or Stage 3 glaze.
Annual Sweep
Signs you need it
You burn more than a cord a year, you use the fireplace more weekends than not, or it’s simply been 12-plus months since the last cleaning.
What it costs in Nashville
An annual sweep for a typical single-flue Nashville home averages $180-$300, including the Level 1 inspection.
How we do it
We protect the hearth area, run a correctly sized brush through the full flue length, vacuum the firebox and smoke chamber, and leave you a dated photo record.
What Chimney Cleaning & Sweep Costs in Nashville
| Item | Typical range in Nashville |
|---|---|
| Standard sweep with Level 1 inspection | $180-$340 |
| Level 2 camera inspection | $300-$600 |
| Heavy creosote removal add-on | $80-$150 |
How often should a chimney be cleaned in Nashville?
Once a year if you burn regularly. Nashville’s humid climate saturates creosote faster than drier regions, so an annual sweep before burn season is the standard for regular wood burners.
Does a chimney sweep include a camera inspection?
At Emberly, yes. Every visit includes a camera scan under Haven Standard Clause 4, and you walk away with photos of the flue interior. Call (980) 580-8641 for an exact quote.
Chimney Repair in Nashville

Chimney repair in Nashville is driven by one local factor above all others: water. Nearly 50 inches of annual rain and a freeze-thaw cycle that repeats all winter means loose mortar, spalled brick, and rusted flashing are not cosmetic issues here, they’re how a chimney comes apart from the top down. When we repair a chimney, the goal is to stop moisture at the source and document every layer with photos, so you’re never being sold a repair you can’t see. The full scope of our Chimney Repair service starts with a camera pass and a written price.
Mortar Repointing
Signs you need it
The mortar joints are crumbling, sandy to the touch, or visibly recessed, and you can scrape material out with a screwdriver.
What it costs in Nashville
Repointing in Nashville usually runs $800-$2,500 depending on how many sides of the chimney need work and why the joints failed.
How we do it
We grind out the failed mortar to a proper depth, match the original joint profile and color as closely as possible, then pack in fresh mortar and seal the surface.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, popping off, or leaving red dust on the ground around the base of the chimney.
What it costs in Nashville
Spalling brick repair in Nashville averages $1,200-$3,000, with the range driven by how many bricks failed and whether the damage wraps around the flue.
How we do it
We remove the damaged brick, replace it with a structurally sound match, and identify the moisture entry point so the spalling doesn’t simply restart in two winters.
What Chimney Repair Costs in Nashville
| Item | Typical range in Nashville |
|---|---|
| Mortar repointing | $800-$2,500 |
| Spalling brick repair | $1,200-$3,000 |
| Chimney waterproofing | $350-$800 |
How long does a chimney repair last in Nashville?
A properly done repointing or brick repair should last 10 to 20 years, but Nashville’s rain volume makes waterproofing the deciding factor. We apply breathable sealant after every masonry repair.
Do you guarantee the repair work?
Yes. Every repair is covered by our 365-Day Done Right Promise, and Haven Standard Clause 1 requires a written scope and warranty before any work starts. Call (980) 580-8641 for a written quote.
Chimney Liner & Rebuild in Nashville

Chimney liner and rebuild work in Nashville almost always traces back to one of two stories: a 1920s-1940s chimney that was never lined and then got gassed-over for decades, or a chimney so rotted from rain and freeze-thaw that rebuilding the top half is the only honest fix. In East Nashville and Sylvan Park we regularly pull old caps and find a flue with no liner at all, where the brick is saturated with sulfur and creosote and firing a single wood load would be a genuine house-fire risk. Our Chimney Liner & Rebuild process starts with a camera scan and a written price, not a vague warning.
Stainless Steel Liner
Signs you need it
The flue was never lined, or the original clay tile liner has cracked and is spalling fragments into the firebox.
What it costs in Nashville
A stainless steel liner install in Nashville ranges from $3,500-$7,500 for a typical single-story flue, depending on diameter and roof access.
How we do it
We measure the full flue run, source the correct diameter liner from DuraFlex or Copperfield, insulate it for Nashville’s temperature swings, and pull it through before sealing the top plate.
Partial Rebuild
Signs you need it
The top few courses of brick are loose or missing, the crown is crumbling, and the mortar looks like sand between the joints.
What it costs in Nashville
A partial rebuild in Nashville typically lands between $2,500-$5,000 depending on how many courses need replacing and whether the flue liner survives.
How we do it
We take the chimney down to solid brick, rebuild the upper courses with proper flashing and a new poured crown, then run a leak test with the camera.
What Chimney Liner & Rebuild Costs in Nashville
| Item | Typical range in Nashville |
|---|---|
| Stainless steel liner install | $3,500-$7,500 |
| Liner replacement (existing damaged liner) | $4,200-$8,000 |
| Partial chimney rebuild | $2,500-$5,000 |
How do I know if I really need a new liner?
The camera scan decides it. If the footage shows cracked tiles, missing sections, or no liner at all, the answer is almost always yes. We’ll show you the video before quoting a dollar figure.
Can a liner be installed in one day?
Most stainless liner jobs are done in a single day, including the insulation and top plate. Rebuilds take two to three days because the mortar and crown need cure time. Call (980) 580-8641 for a written price.
Brands We Service in Nashville

We install and service liners and components from DuraFlex, Copperfield, and HeatShield, with the common sizes stocked locally for Nashville’s flue configurations. When a part needs ordering, it’s typically in hand within a week. See our brands for the full list and why we source through the Haven buying network.
Pricing for Chimney Cleaning in Nashville, TN
| Service | Typical range in Nashville |
|---|---|
| Standard chimney sweep with Level 1 inspection | $180-$340 |
| Level 2 camera inspection | $300-$600 |
| Heavy creosote removal add-on | $80-$150 |
| Mortar repointing | $800-$2,500 |
| Spalling brick repair | $1,200-$3,000 |
| Chimney waterproofing | $350-$800 |
| Stainless steel liner install | $3,500-$7,500 |
| Liner replacement | $4,200-$8,000 |
| Partial chimney rebuild | $2,500-$5,000 |
| Full chimney rebuild | $8,000-$15,000 |
What pushes a Nashville quote toward the top of a range is almost always access: steep roof pitches in the hilly sections of East Nashville, multi-story flues in the taller Germantown builds, or steel scaffolding needs on a tight lot line. Every price you get from us is a written number with a written scope and a written warranty attached, per Haven Standard Clause 1, so the number doesn’t move after the tech is in your driveway.
Neighborhoods We Serve in Nashville

We work across Davidson County, with the most calls coming from neighborhoods where the old masonry stock is densest. Response times are typically one to three business days for a sweep and within a week for larger rebuilds, depending on the current schedule.
- East Nashville
- Sylvan Park
- Germantown
- Belle Meade
- Green Hills
Service Area - Cities Near Nashville
We serve homeowners throughout Nashville and the surrounding Metro area, including Brentwood, TN, Hendersonville, TN, Mount Juliet, TN, and La Vergne, TN. Dispatch and scheduling are coordinated from the brand’s Memphis office, with local crews serving Nashville and the nearby cities directly.
Serving Nashville, TN - Our Local Coverage Area

We’re based in the Nashville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Nashville
Most routine sweeps and inspections require no permit. Larger rebuilds or liner work may require one depending on the scope, and we’ll tell you if yours does before any work is scheduled. Metro Nashville’s codes office has gotten stricter about unlined flues in rental properties.
Nashville’s short-term rental market is one of the largest in the country, and property managers are being asked by insurers to produce documented inspections between guest cycles. The photo record we give you satisfies that requirement, and we’ve handled thousands of rental-property flues.
We typically schedule sweeps within one to three business days across Davidson County. During the fall rush, it can stretch to a week, so we recommend booking before October if you want the fireplace running by the first cold snap. Call (980) 580-8641 and we’ll give you a specific date on the spot.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Nashville Customers Say
"We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V.





Before
After
Before
After