Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Moore, OK
A chimney cleaning in Moore usually costs between $189 and $329 for a standard sweep with a Level 1 inspection, and most jobs are completed in 90 minutes or less. What makes Moore different is the wind: two catastrophic tornadoes in 14 years left thousands of surviving chimneys with hidden stress fractures that only a camera can show. If your home dates to the 1970s through 1990s and has never been scoped, call (980) 580-8641 for a written quote before winter burning season.
Why Moore Homes Are Different
Moore carries a housing stock no other metro city has. The 1999 F5 and 2013 EF5 tornadoes cut the city in two: surviving pre-tornado brick ranch homes from the 1970s through 1990s, and a huge wave of post-2013 rebuilds, many of which used factory-built metal chase systems instead of traditional masonry. A chimney company working in Moore has to know both, often on the same block.
The older survivors are the ones we watch most closely. Clay tile liners and mortar joints that absorbed severe wind-load stress may look fine from the roofline, but a camera-scan inspection regularly finds cracked flue tiles even in homes that “only lost shingles” in 2013. Oklahoma’s freeze-thaw cycles then work those cracks open. A wet autumn followed by a hard freeze will drive water into a hairline fracture and widen it by spring, which is exactly when moisture and animals find a way in. Add Moore’s routine high-wind storms to the mix, and caps get dislodged and flashing gets bent in non-tornado years too. The takeaway is simple: in Moore, a visual check from the roof is not enough. The flue interior needs to be seen.
Our Main Moore Services
Beyond cleaning and repair, Moore homeowners call us most about two things: the fireplace itself, and the cap and crown that protect the top of the chimney from Oklahoma weather. Here is what each involves locally.
Fireplace Services in Moore
We service both wood-burning fireplaces in older Moore brick homes and the gas inserts common in post-2013 rebuilds. The work includes glass and gasket replacement, gas log set installation, damper repair, and smoke chamber parging. On older units we often find damper frames warped by years of heat cycling, which lets conditioned air escape year-round. Learn more on our Fireplace Services in Moore page.
Chimney Cap & Crown in Moore
Moore’s storm exposure makes the cap and crown the first line of defense. A dislodged cap from straight-line winds lets rain, birds, and raccoons into the flue, and a cracked crown lets water into the brick shoulders below. We repair crowns with tapered mortar and install or replace caps sized to the flue, including multi-flue covers for older brick chimneys. Details are on our Chimney Cap & Crown in Moore page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cleaning & Sweep in Moore
Chimney cleaning and sweeping in Moore is about more than removing soot. The surviving pre-tornado housing stock means thousands of clay-tile flues have never been camera-scoped after the 1999 or 2013 storms, and a standard sweep without a camera can miss cracked tiles that are the first sign of wind-stress damage. Our Chimney Cleaning & Sweep work pairs mechanical creosote removal with a Level 2 camera-scan inspection as the default, so you leave with both a clean flue and a documented photo record of its interior condition. That record matters in Moore specifically: if the flue absorbed storm damage, you want to know before burning season, not after a chimney fire or water leak proves it.
Level 1 Inspection
Signs you need it
You burn the fireplace regularly and the system has not changed since last year, but you have never seen the flue interior on camera.
What it costs in Moore
A Level 1 inspection in Moore runs $125 to $250 and is included free with every sweep we perform.
How we do it
We assess the accessible portions of the fireplace, flue, and exterior, then document what we find in writing and with photos, not a verbal summary.
Creosote Removal
Signs you need it
The flue walls hold more than 1/8 inch of shiny, tar-like glaze, which is Class II or Class III creosote and a chimney fire fuel source.
What it costs in Moore
Creosote removal in Moore typically runs $250 to $450, depending on the class and whether it sits within the firebox or up the full flue height.
How we do it
We use rotary loop tools and chemical treatment for glazed Class III, then camera-verify the flue is clean to bare tile or metal before we call it done.
What Chimney Cleaning & Sweep Costs in Moore
| Item | Typical range in Moore |
|---|---|
| Annual sweep with Level 1 inspection | $189 - $329 |
| Creosote removal (glazed, Class III) | $250 - $450 |
| Level 2 camera inspection | $225 - $400 |
How often should a chimney be swept in Moore?
Once per burning season, or after roughly one cord of wood. Moore homes with pre-tornado flues should also get a camera scope at least once before first use, even if the sweep is not yet due. Call (980) 580-8641 to schedule.
Do I really need a Level 2 camera inspection, or is a normal sweep enough?
In Moore, we recommend the camera. Surviving pre-tornado flues can hide cracked tile joints behind a clean-looking sweep, and only the video shows it. The Level 2 runs $225 to $400 and the footage is yours to keep. Call for a written quote.
Chimney Repair in Moore
Chimney repair in Moore concentrates on two things: mortar joints cracked by decades of Oklahoma freeze-thaw cycling and wind-load flexing, and flashing pulled loose by high-wind events. Homes that survived 1999 and 2013 often have hairline mortar fractures that were never repaired because the damage stayed hidden behind siding or below the roofline. Our Chimney Repair work starts with a level check and a written scope, so you see the full list of what actually needs repair, with prices, before anything is done.
Mortar Repointing
Signs you need it
Mortar joints are eroding, with visible gaps or crumbling powder between bricks, especially on the upper courses exposed to Moore’s wind-driven rain.
What it costs in Moore
Mortar repointing in Moore runs $20 to $40 per square foot, or $900 to $1,800 for a typical full chimney face.
How we do it
We rout out loose mortar to a consistent depth, then pack fresh mortar in lifts that match the original joint profile and compressive strength.
Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, or the flashing is visibly lifted, rusted, or missing sealant at the roof line.
What it costs in Moore
Flashing repair in Moore typically runs $350 to $800, depending on whether it is a re-seal or a full replacement with step and counter flashing.
How we do it
We remove the old flashing, inspect the roof deck beneath for rot, then install new step and counter flashing sealed to the chimney and the roof plane.
What Chimney Repair Costs in Moore
| Item | Typical range in Moore |
|---|---|
| Mortar repointing | $20 - $40 / sq ft |
| Spalling brick repair | $600 - $1,600 |
| Flashing repair / replacement | $350 - $800 |
Does repointing fix a chimney that has shifted or bowed?
No. Repointing repairs mortar joints, not structural movement. A shifted chimney in Moore usually requires partial or full rebuilding, which we will show you in the written scope before recommending. Call (980) 580-8641 for an exact quote.
Can I wait until spring to fix loose flashing in Moore?
We do not recommend it. One hard freeze after a wet autumn can turn a small flashing gap into a water intrusion path by spring, and Moore’s storm season starts before winter ends most years. Call (980) 580-8641 for a written repair quote.
Chimney Liner & Rebuild in Moore
Chimney liner and rebuild work in Moore is driven by the pre-tornado housing stock: thousands of clay-tile liners with hidden wind-stress cracks that have never been scoped since 1999 or 2013. When a Level 2 camera shows cracked or spalled tile, a stainless liner or partial rebuild is the fix, not a brush-and-go. Our Chimney Liner & Rebuild work uses DuraFlex and Copperfield components and is always quoted in writing with the camera evidence attached, so you see exactly why the recommendation was made.
Stainless Steel Liner
Signs you need it
The camera shows cracked, spalled, or missing clay tile sections, or you are switching to a high-efficiency gas appliance that requires a correctly sized flue.
What it costs in Moore
A stainless steel liner installed in Moore typically runs $2,800 to $4,500, including parts, labor, and the Level 2 verification after.
How we do it
We size the liner to the appliance and flue dimensions, feed it down from the top, insulate where required, and camera-verify the full run before finishing.
Partial Rebuild
Signs you need it
The top five to ten courses of brick are spalling or loose, or the crown and upper shoulders show structural movement after storm-force winds.
What it costs in Moore
A partial chimney rebuild in Moore runs $2,500 to $5,000 for the top courses, plus any liner work if the flue is compromised.
How we do it
We brace what remains, demolish the unsound section, rebuild to the original profile with new brick and mortar, then cast a new crown over it.
What Chimney Liner & Rebuild Costs in Moore
| Item | Typical range in Moore |
|---|---|
| Stainless steel liner with insulation | $2,800 - $4,500 |
| Partial rebuild (top courses) | $2,500 - $5,000 |
| Full chimney rebuild | $8,000 - $16,000 |
Do I really need a new liner, or can I keep using the old clay tile?
If the camera shows cracked or spalled tile, the flue is no longer a safe path for heat or exhaust, and continuing to burn is a chimney fire risk. A stainless liner restores a continuous, code-compliant path. Call (980) 580-8641 with your camera findings for a written quote.
How long does a stainless liner last in Moore’s climate?
A correctly sized and installed 316L stainless liner typically lasts 20 to 30 years, even with Oklahoma’s freeze-thaw swings and high-wind exposure. The weak points are always the cap and flashing above it, not the liner wall itself. Call (980) 580-8641 to schedule a camera scope first.
Brands We Service in Moore
We stock and install components from DuraFlex, Copperfield, HeatShield, Gelco, Olympia Chimney, and Famco. Most liner and cap parts are on hand or arrive within two business days in Moore. See our brands for the full list and why we selected them.
Pricing for Chimney Cleaning in Moore, OK
| Service | Typical range in Moore |
|---|---|
| Annual chimney sweep (with Level 1) | $189 - $329 |
| Creosote removal (glazed, Class III) | $250 - $450 |
| Level 2 camera inspection | $225 - $400 |
| Mortar repointing | $20 - $40 / sq ft |
| Spalling brick repair | $600 - $1,600 |
| Flashing repair / replacement | $350 - $800 |
| Stainless steel liner with insulation | $2,800 - $4,500 |
| Partial rebuild (top courses) | $2,500 - $5,000 |
| Full chimney rebuild | $8,000 - $16,000 |
Two things push Moore pricing higher than a flat-rate market. The first is access: pre-tornado ranch homes often have steep roof pitches and original framing that make scaffold and ladder work slower. The second is storm damage discovered mid-job, like a cracked crown or shifted flashing that was not visible from the ground. Every price is written before work starts, and nothing gets added without your signature. That is Clause 1 of the Haven Standard.
Neighborhoods We Serve in Moore
We work throughout Moore, from the older 1970s brick streets west of I-35 to the post-2013 rebuilds along the tornado track near Briarwood and Plaza Towers. Response time across Moore is typically same-week, with faster scheduling during spring and fall when technicians are already working adjacent streets.
- Briarwood
- Plaza Towers area
- Old Town Moore
- East Hills
- Stonebridge
Service Area - Cities Near Moore
We serve Moore plus the surrounding metro, including Oklahoma City, OK, Norman, OK, Edmond, OK, and Midwest City, OK. Dispatch and scheduling are coordinated from our Oklahoma City office, with crews running routes through Moore every week.
Serving Moore, OK - Our Local Coverage Area
We’re based in the Moore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Moore
Most Moore jobs are scheduled within three to five business days, and we batch routes along the same streets or subdivisions when possible. Spring and fall fill fastest, so we recommend calling (980) 580-8641 before burning season begins to lock in a written quote.
Repairs and sweeps on an existing chimney generally do not need a City of Moore permit, but some HOAs require written approval for exterior rebuilds or liner changes visible from the street. We provide the written scope and documentation your HOA will ask for before we start. Call (980) 580-8641 with your HOA’s requirements and we will help you package the request.
Not in method, but in what we look for. The Level 2 camera work is the same, but in Moore we specifically track hairline fractures at clay tile joints, shifted crown mortar, and flashing gaps that match the wind patterns of the 1999 and 2013 events. The report notes these findings in storm-specific language your insurer can use. Call (980) 580-8641 to schedule an assessment.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Moore Customers Say
"Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O.