Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Maywood, CA
Chimney cleaning in Maywood typically costs $169-$289 for a standard sweep with a Level 1 inspection, and $249-$449 when a camera scan is included. Most Maywood homes need that camera scan more than their owners expect, because the housing stock averages 80 to 100 years old and flues here routinely hide collapsed terra-cotta liner tiles, crumbling mortar joints, and wildlife nesting. If you haven’t had your chimney looked at in three or more years, call (980) 580-8641 for a written quote before anything else happens.
Why Maywood Homes Are Different
Maywood grew as a working-class streetcar suburb between the 1920s and 1940s, and the housing that remains is almost entirely small brick-and-stucco bungalows on tight lots, with original masonry fireplaces tied to brick flues that are now 70 to 100 years old. These were seldom upgraded after construction. Many still run an unlined or single-wythe brick interior, which was acceptable by the codes of their day but does not meet modern safety expectations for repeated use.
What really sets Maywood apart is how little the fireplaces get used. South Coast AQMD no-burn alerts and a mild basin climate mean most of these hearths sit dormant for years at a stretch. That long dormancy sounds harmless, but it is exactly what lets moisture creep into the crown, debris collect at the smoke shelf, and birds or rats build nests in the flue. By the time a technician finally drops a camera down, the condition is often far worse than the living room suggests. Corrine Halstead, who leads our team, has reviewed thousands of inspection records from dense, older grids like this one, and the pattern is consistent: the chimney that has not been used in five years is usually the one with the most expensive hidden damage.
Our Main Maywood Services
Most Maywood homeowners first call us about one of two things: a fireplace that is not drawing or venting properly, or a chimney crown that has cracked open and started letting water into the brickwork below. Both are covered by dedicated Maywood pages.
Fireplace Services in Maywood
Older Maywood bungalows frequently have dampers that were wired shut decades ago during a remodel, or fireboxes with cracked refractory panels that make burning unsafe. Our Fireplace Services in Maywood page walks through the specific repairs these pre-1955 homes need, what each one costs, and how we document the condition before recommending any work.

Chimney Cap & Crown in Maywood
The crown is the flat concrete or mortar surface at the top of the chimney, and on Maywood homes it is almost always original. When it cracks, water enters the brick and accelerates spalling. Our Chimney Cap & Crown in Maywood page covers crown repair, cap installation, and the exact price ranges for this market.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Sweep in Maywood

Chimney cleaning in Maywood is a different job than it is in newer suburbs. The flues here are almost all original brick from the 1920s through the 1950s, and because SCAQMD no-burn rules and mild winters keep fireplaces idle for months or years at a time, creosote is rarely the only problem we find. More often, the camera reveals collapsed terra-cotta liner sections, mortar that has turned to sand, or a nest that has been blocking the flue since the last cold snap. Our full Chimney Sweep service page covers the process in depth, but the short version is this: we clean what can be cleaned safely, and we show you photo evidence of anything that cannot.
Level 1 Inspection
Signs you need it
You use your fireplace regularly and nothing about its performance has changed, but you have not had it inspected in over a year.
What it costs in Maywood
A Level 1 inspection is bundled into a standard sweep at $169-$289.
How we do it
We check the accessible portions of the flue, firebox, damper, and chimney exterior, then hand you a written condition report before making any repair recommendation.
Level 2 Inspection
Signs you need it
You bought the house recently, want to sell it, had a chimney fire, or the home is old enough that the flue has never been assessed with a camera.
What it costs in Maywood
A Level 2 camera inspection with full documentation runs $249-$449 as a standalone service, and is included in our premium sweep package.
How we do it
We run a video camera down the full flue length, through the smoke chamber, and from the roof down, then archive the footage so you have a record under Haven Standard Clause 4.
Creosote Removal
Signs you need it
You burn wood more than a handful of times each season and the flue walls show a dark, shiny, or tarry glaze when wiped.
What it costs in Maywood
Creosote removal is included in a standard sweep at $169-$289, but Class III glaze may require chemical treatment that adds $80-$150.
How we do it
We run rotary wire brushes and, for heavy glazing, apply a creosote conditioner that breaks down the tar before a follow-up brushing.
Soot Removal
Signs you need it
Your fireplace has a steady fine black dust that reappears quickly after cleaning, or visible dark buildup at the damper and smoke shelf.
What it costs in Maywood
Soot removal as part of a full sweep runs $169-$289, and standalone soot-only work may be quoted below $200 depending on access.
How we do it
We brush the flue, vacuum the smoke chamber and firebox, and clean the damper assembly before testing the draft.
Annual Sweep
Signs you need it
More than a year has passed since your last cleaning, or you use the fireplace with any regularity during winter months.
What it costs in Maywood
A standard annual sweep is $169-$289, including the Level 1 inspection and written report.
How we do it
We run the brush through the full flue length, remove debris from the smoke shelf and shelf area, vacuum everything, and capture before/after photos.
What Chimney Sweep Costs in Maywood
| Item | Typical range in Maywood |
|---|---|
| Standard sweep + Level 1 inspection | $169-$289 |
| Sweep + Level 2 camera inspection | $249-$449 |
| Creosote chemical treatment add-on | $80-$150 |
How often should a chimney be swept in Maywood?
Once a year if you burn at all, and even if you don’t, an inspection every two years catches water and wildlife damage early. Call (980) 580-8641 to schedule a sweep with a written quote first.
Do I need a camera inspection if the chimney looks fine?
In Maywood’s 1920s-1950s housing stock, yes. Flues built before modern liner standards routinely hide problems only a camera can see, and our archive record gives you evidence instead of guesswork.
Chimney Repair in Maywood

Chimney repair in Maywood usually starts with something the homeowner already saw: cracked brick at the roofline, a rusted flashing joint, or water staining on the ceiling near the hearth. What they rarely see is the extent of damage behind it, because original single-wythe brick from the 1920s and 1930s fails from the inside once moisture gets in. Our Chimney Repair service page covers the full repair scope, and every Maywood repair quote includes the camera evidence that made the need visible.
Mortar Repointing
Signs you need it
The mortar joints on your chimney face are eroding, with visible gaps or sandy material that rubs off when you touch it.
What it costs in Maywood
Mortar repointing typically runs $800-$2,500 in Maywood depending on how much of the stack is affected.
How we do it
We grind out the degraded mortar to a proper depth, pack in new mortar matched to the original joint color and profile, and tool it flush with the brick face.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, crumbling, or showing spalled off surfaces that leave raw brick exposed to further water entry.
What it costs in Maywood
Spalling brick repair ranges from $400-$1,200 for isolated bricks to $1,500-$4,000 for larger sections.
How we do it
We cut out the damaged brick, replace it with matched material, and apply a breathable sealant only when it won’t trap moisture.
Chimney Waterproofing
Signs you need it
You see interior water staining, efflorescence on the brick, or dark, damp patches that persist long after rain.
What it costs in Maywood
Full chimney waterproofing runs $400-$800 for a typical single-stack Maywood chimney.
How we do it
We apply a vapor-permeable silane/siloxane treatment that sheds water while letting the brick breathe, after first repairing any mortar or crown defects.
Flashing Repair
Signs you need it
You have a ceiling stain near the fireplace, or you can see rusted, lifting, or missing flashing where the chimney meets the roof.
What it costs in Maywood
Flashing repair ranges from $350-$900 depending on roof pitch and how much of the existing metal can be reused.
How we do it
We cut back the old flashing, install new step and counter flashing, and seal the joint with a high-grade roofing mastic before testing with water.
Chimney Rebuilding
Signs you need it
The stack above the roofline is visibly leaning, badly cracked, or has lost enough brick that patching won’t hold.
What it costs in Maywood
Chimney rebuilding above the roofline runs $2,500-$7,500, with taller stacks and difficult roof access pushing toward the top of that range.
How we do it
We tear down the compromised section, rebuild it with new brick or block, install a proper crown and cap, and document the new construction with photos.
What Chimney Repair Costs in Maywood
| Item | Typical range in Maywood |
|---|---|
| Mortar repointing | $800-$2,500 |
| Flashing repair | $350-$900 |
| Chimney waterproofing | $400-$800 |
Can you repair my Maywood chimney without a full rebuild?
Usually yes, if the liner is sound and the damage is confined to the masonry or flashing. Most repair jobs in Maywood never reach rebuild scope, but the camera report will show you exactly why a repair is or isn’t enough.
How do I know if my chimney needs repair or just cleaning?
The cleaning itself reveals it. If debris keeps accumulating or the flue surface looks irregular on camera, we’ll show you the photos and give you a written repair quote separately, with no pressure.
Chimney Liner & Rebuild in Maywood

Chimney liner replacement in Maywood is one of the most common serious repairs we quote, because the original flues in this housing stock were built without the stainless steel or poured-in-place liners that are standard today. After 70 to 100 years, the terra-cotta tiles that did exist have often shifted, cracked, or collapsed entirely, leaving the masonry as the only barrier between the flue gases and the house. Our Chimney Liner & Rebuild service page covers the full options, and we source our liner materials from DuraFlex and HeatShield so the warranty is as traceable as the installation.
Stainless Steel Liner
Signs you need it
Your existing flue is unlined, the terra-cotta tiles are cracked, or you want a fuel-tight system with a long, transferable warranty.
What it costs in Maywood
Stainless steel liner installation in Maywood typically runs $2,800-$5,500 for a single-story bungalow flue.
How we do it
We size the liner to the appliance, drop it down the existing flue, insulate where required, and run a camera post-install to confirm the run is clean and straight.
Flexible Liner
Signs you need it
The flue has bends or offsets, or the original chimney route cannot accommodate a rigid liner without major demolition.
What it costs in Maywood
Flexible liner work runs $2,800-$5,500, similar to rigid stainless, with the final number set by length and access.
How we do it
We feed a continuous flexible stainless liner through the existing flue path, secure it at the top and bottom, and insulate as needed for the appliance type.
Liner Replacement
Signs you need it
The existing liner is cracked, collapsed, or eroded to the point that water and flue gases can both pass through the same gaps.
What it costs in Maywood
Complete liner replacement including demolition of the old tile runs $3,200-$6,500 in Maywood.
How we do it
We break out the old terra-cotta tiles when necessary, clear the flue path, and install a new stainless or cast-in-place liner sized to the existing masonry.
Partial Rebuild
Signs you need it
The top few feet of the stack are damaged beyond repointing, or the crown and the masonry just below it are compromised together.
What it costs in Maywood
A partial rebuild of the top stack sections runs $2,500-$6,000, depending on height and roof access.
How we do it
We remove the damaged top section, rebuild it, pour a new crown, and install a cap that keeps water and animals out.
Full Chimney Rebuild
Signs you need it
The chimney is structurally unsound from top to bottom, sagging, or so heavily spalled that the masonry cannot be saved.
What it costs in Maywood
A full chimney rebuild in Maywood runs $8,000-$18,000, with the upper end reserved for tall stacks and difficult roof staging.
How we do it
We tear down the old structure, lay new block or brick, install a new liner, crown, and cap, and document the entire rebuild with photos at every stage.
What Chimney Liner & Rebuild Costs in Maywood
| Item | Typical range in Maywood |
|---|---|
| Stainless steel liner | $2,800-$5,500 |
| Liner replacement | $3,200-$6,500 |
| Partial rebuild | $2,500-$6,000 |
Do I really need a new liner, or is this an upsell?
You will see the evidence before you spend anything. Our camera report shows cracked or missing terra-cotta sections, and we only quote a liner when the flue cannot safely carry the exhaust. Get a written quote by calling (980) 580-8641.
Can you reline my Maywood chimney without tearing down the brick?
Usually yes, and that is the point of a stainless or flexible liner. The masonry stays, the flue gets a new sealed path, and you keep the original look of the house.
Brands We Service in Maywood

We work on all major chimney brands and materials, and we stock common parts from DuraFlex, Famco, and Copperfield so most Maywood repairs don’t wait on shipping. For anything we do not carry on the truck, turnaround is typically three to five business days. See our brands for the full list.
Pricing for Chimney Cleaning in Maywood, CA
| Service | Typical range in Maywood |
|---|---|
| Chimney sweep + Level 1 inspection | $169-$289 |
| Sweep + Level 2 camera inspection | $249-$449 |
| Creosote chemical treatment | $80-$150 |
| Mortar repointing | $800-$2,500 |
| Spalling brick repair | $400-$4,000 |
| Chimney waterproofing | $400-$800 |
| Flashing repair | $350-$900 |
| Chimney rebuilding (above roofline) | $2,500-$7,500 |
| Stainless steel liner | $2,800-$6,500 |
| Full chimney rebuild | $8,000-$18,000 |
In Maywood, the two things that push a quote toward the upper end are roof access and unknown flue condition. Tight lot lines and dense construction make ladder staging harder than in open subdivisions, and the older the flue, the more likely we find something that changes the scope once the camera goes down. That is exactly why every quote is written before work starts, with the scope and warranty on paper, under Haven Standard Clause 1.
Neighborhoods We Serve in Maywood

We cover all of Maywood and the immediately surrounding blocks, from the residential streets east of Atlantic Boulevard to the bungalow rows near the Los Angeles River. Response time for most Maywood appointments is one to three business days.
- East Maywood
- Maywood Avenue district
- Slauson Avenue corridor
- Atlantic Boulevard residential grid
- South Maywood
Service Area - Cities Near Maywood
Our crews also serve the neighboring communities right around Maywood, including Bell, CA, Huntington Park, CA, Bell Gardens, CA, and South Gate, MD. Scheduling is coordinated from our Los Angeles office, and the same written-price, camera-documented standard applies everywhere we go.
Serving Maywood, CA - Our Local Coverage Area

We’re based in the Maywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Maywood
Most cleaning and repair work does not require a city permit, but full rebuilds and liner work may trigger one depending on the structural scope and current code. We handle the permit application as part of the written scope when it is required, so you aren’t left sorting it out on your own. Call (980) 580-8641 for the specifics on your chimney.
Typical scheduling is one to three business days from your call, and we text you with the assigned tech’s name before they arrive. Urgent water-intrusion cases can often be seen the same week, depending on crew availability and weather.
You get a written condition report, photos from the inspection, and a written quote for any recommended repairs, all before anyone starts extra work. That photo record is standard on every visit under Haven Standard Clause 4, not an add-on you have to request.
If you own a Maywood home with an older masonry chimney, the best time to have it looked at is before you plan to use it. Call (980) 580-8641 and we will give you a written price, a camera-documented inspection, and a straight answer about what the flue actually needs.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maywood Customers Say
"Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O.





Before
After
Before
After