Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Lake Worth, FL
Chimney cleaning in Lake Worth, FL typically costs between $189 and $329 for a standard sweep with a Level 1 inspection, and between $249 and $479 when a camera-scan Level 2 inspection is included. What makes Lake Worth different from inland South Florida is the housing stock: the city’s historic district has a genuine concentration of 1920s through 1940s masonry chimneys, most of them original, and the salt air off the Lake Worth Lagoon corrodes dampers, caps, and flashing even when a fireplace goes almost unused. Call (980) 580-8641 for a written quote before any work starts.
Why Lake Worth Homes Are Different
Lake Worth sits directly on the Lake Worth Lagoon, with the Atlantic less than two miles east. That geography means the air moving through a chimney flue carries salt and sustained humidity above 75% most of the year. We regularly open dampers in the historic district that are seized solid from oxidation, on chimneys where the homeowner burned wood once or twice a season at most. The damage was never from fire. It was from salt-laden coastal air and decades of humidity cycles working on the metal components.
The housing stock compounds the issue. Lake Worth’s pre-war Mediterranean Revival and Craftsman bungalows were built with lime-based mortar, not modern Portland cement. Lime mortar breathes, which is good for old brick, but it also absorbs ambient moisture and spalls, crumbles, and powders under decades of humid, salty conditions. Masonry chimneys here are an anomaly for South Florida, and many have gone uninspected for decades because the climate offers so few genuine burning days. That does not mean they are fine. It means no one has looked.
Hurricane season, June through November, is a seasonal demand driver in its own right. Crowns crack, caps shift, and flashing lifts under storm winds. Post-storm inspection requests are common in Lake Worth, and our technicians know what storm displacement looks like on a 90-year-old masonry stack.
Our Main Lake Worth Services
Lake Worth homeowners call about two things more than any other: the fireplace itself, and the cap and crown protecting the top of the chimney. Both matter more here than inland because salt and storm winds hit exposed chimney components all year.
Fireplace Services in Lake Worth
Fireplaces in Lake Worth’s pre-war bungalows are often original to the home and were built for aesthetics as much as heat. Dampers seize, smoke chambers accumulate decades of fine soot, and fireboxes crack along mortar lines. We service the full firebox, damper assembly, smoke shelf, and hearth, and we document every finding with camera photos before and after. See the full scope on our dedicated Fireplace Services in Lake Worth page.
Chimney Cap & Crown in Lake Worth
The crown is the concrete slab at the top of the chimney. In Lake Worth, crowns take a beating from salt air and storm season. Hairline cracks open up, water gets in, and freeze-thaw is not required for damage here; humidity does the work on its own. Caps rust and shift. We install and repair both. Details and pricing are on our Chimney Cap & Crown in Lake Worth page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cleaning & Sweep in Lake Worth
Chimney cleaning and sweep work in Lake Worth is not the creosote-heavy job it is in colder climates. Here, the more common problem is oxidized dampers, corroded caps, and mortar dust accumulating inside the flue from spalling joints. That said, when homeowners in the historic district do burn, the high humidity slows creosote drying and increases the chance of a sticky, concentrated buildup. A camera-scan inspection tells us exactly which condition the chimney has, before any cleaning gets done. For a full overview of our process, see our Chimney Cleaning & Sweep hub page.
Level 1 Inspection
Signs you need it
You burn wood occasionally and want a basic condition check of the accessible portions of the flue, damper, and firebox before the season starts.
What it costs in Lake Worth
A Level 1 inspection in Lake Worth runs $189 to $329 when combined with a standard sweep.
How we do it
We check the accessible flue, damper operation, firebox condition, and cap from the roof, then document it with photos and a written report.
Level 2 Inspection
Signs you need it
You just bought a home, the chimney has not been inspected in years, or a storm recently passed through and you want the flue interior scanned.
What it costs in Lake Worth
A Level 2 inspection with a camera scan in Lake Worth runs $249 to $479.
How we do it
We run a camera down the full flue length, document liner condition and mortar joints, then hand you a photo and video record of the scan.
Creosote Removal
Signs you need it
You can see a dark, tar-like glaze on the firebox walls or smell a sharp, smoky odor even when the fireplace is cold.
What it costs in Lake Worth
Creosote removal in Lake Worth typically adds $89 to $189 to the standard sweep, depending on classification.
How we do it
We identify the creosote class, then use rotary brushes and chemical treatment where needed to break down and remove the buildup.
Soot Removal
Signs you need it
A black film has built up inside the firebox or the damper housing, or smoke has ever backed up into the room.
What it costs in Lake Worth
Soot removal in Lake Worth typically runs $89 to $189 as an add-on to a standard sweep.
How we do it
We brush down the flue, vacuum the smoke chamber and shelf, and clean the damper assembly with HEPA filtration running.
Annual Sweep
Signs you need it
You use the fireplace at least a few times a year and want to stay ahead of buildup rather than react to a problem.
What it costs in Lake Worth
A standard annual sweep in Lake Worth runs $189 to $329 and includes a Level 1 inspection.
How we do it
We protect the hearth, run the brush system through the flue, vacuum the firebox and smoke chamber, and leave a photo report.
What Chimney Cleaning & Sweep Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Annual sweep with Level 1 inspection | $189 - $329 |
| Level 2 inspection with camera scan | $249 - $479 |
| Creosote or soot removal add-on | $89 - $189 |
Does my Lake Worth chimney need cleaning if I never burn?
Possibly not for creosote, but your damper and cap may be corroding from salt air regardless. The right first step is a camera-scan inspection to see what is actually there. Call (980) 580-8641 to book one.
How long does a chimney sweep take in Lake Worth?
A standard sweep with a Level 1 inspection takes 60 to 90 minutes. A Level 2 inspection with a full camera scan runs closer to two hours on site. We schedule in advance, so you’ll know the window.
Chimney Repair in Lake Worth
Chimney repair in Lake Worth is often mortar work rather than firebox work. Lime-based mortar on pre-war bungalows spalls under decades of humidity and salt air, and the joints open up well before any structural crack appears. Repointing and waterproofing are the two most common repairs we quote in the historic district, and both are addressable before the damage spreads. Read more about our repair process at Chimney Repair.
Mortar Repointing
Signs you need it
Mortar joints look recessed, crumbly, or have visible gaps where water can get behind the brick.
What it costs in Lake Worth
Repointing in Lake Worth typically runs $42 to $78 per square foot of masonry.
How we do it
We grind out the deteriorated joint to a proper depth, then pack in a matched mortar that moves with the old brick rather than against it.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, popping off in chunks, or leaving rust-colored dust on the hearth or roof near the chimney.
What it costs in Lake Worth
Spalling brick repair in Lake Worth typically runs $52 to $90 per square foot depending on depth.
How we do it
We cut out the damaged brick, replace it with a close match, and repoint the surrounding joints to lock the section in.
Chimney Waterproofing
Signs you need it
Water stains appear on the interior walls near the chimney or you see efflorescence, the white chalky deposit, on the brick exterior.
What it costs in Lake Worth
Waterproofing in Lake Worth runs $349 to $699 for the typical residential chimney.
How we do it
We clean the masonry, let it dry, then apply a vapor-permeable sealant that keeps water out while allowing the brick to breathe.
Flashing Repair
Signs you need it
You see rusted metal at the roofline, or leaks appear in the attic after a storm when wind drives rain sideways.
What it costs in Lake Worth
Flashing repair in Lake Worth runs $299 to $649 depending on how much of the roofline has to be opened.
How we do it
We remove the old flashing, inspect the underlayment, and install new step and counter flashing sealed to the chimney and roof.
What Chimney Repair Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Mortar repointing | $42 - $78 / sq ft |
| Spalling brick repair | $52 - $90 / sq ft |
| Chimney waterproofing | $349 - $699 |
Can you match the mortar color on a 1920s Lake Worth bungalow?
Yes. We mix on site and match both color and aggregate texture to the original mortar. Lime-based mortar gets a lime-based patch, not a modern cement that would outlast and break the old brick. Call (980) 580-8641 for a written quote.
Is it safe to wait on repointing?
If the joints have visible gaps, water is getting in and the damage accelerates every rainy season. A written quote after inspection tells you exactly what can wait and what cannot. Estimates are free and documented in writing.
Chimney Liner & Rebuild in Lake Worth
Chimney liner and rebuild work in Lake Worth is more common than most homeowners expect, especially on pre-war masonry chimneys that have never had a camera scan. A liner may be cracked, separated at the joints, or missing entirely behind intact-looking brick. Rebuild work is less frequent, but when a historic chimney has suffered decades of spalling and storm shifts, a partial or full rebuild is the only fix that holds. For the full scope of what goes into a liner install, visit Chimney Liner & Rebuild.
Stainless Steel Liner
Signs you need it
Your camera scan shows cracked clay tile, missing mortar, or the flue was never lined to begin with, which is common in 1920s construction.
What it costs in Lake Worth
A stainless steel liner in Lake Worth runs $1,950 to $3,400 including the connection work.
How we do it
We size the liner to the appliance and flue length, then lower it down and insulate it where code requires, sealing the top and bottom.
Flexible Liner
Signs you need it
Your flue has an offset or is not a straight vertical run, and a rigid liner cannot navigate the bend.
What it costs in Lake Worth
A flexible liner in Lake Worth runs $2,200 to $3,800 for the typical residential chimney.
How we do it
We run the flexible liner through the flue path, secure it at the top plate and appliance collar, and document the full installation with photos.
Liner Replacement
Signs you need it
The existing liner is rusted through in spots, has separated sections, or no longer meets the current size requirements for the appliance.
What it costs in Lake Worth
Liner replacement in Lake Worth runs $2,400 to $4,200 depending on flue height and access.
How we do it
We remove what the old liner will allow, install the new one to manufacturer spec, and finish with a camera scan to confirm the full run.
Partial Rebuild
Signs you need it
The top several courses of brick are spalled or loose, or the crown and shoulders have failed but the rest of the stack is sound.
What it costs in Lake Worth
A partial rebuild in Lake Worth runs $2,500 to $5,000 depending on how many courses have to come down.
How we do it
We take the stack down to solid masonry, rebuild the courses with matched brick and mortar, then pour a new crown.
Full Chimney Rebuild
Signs you need it
The chimney leans visibly, brick is spalling at multiple levels, or the internal structure is compromised beyond sectional repair.
What it costs in Lake Worth
A full rebuild in Lake Worth generally starts at $6,500 and runs up from there based on height, access, and materials.
How we do it
We bring the stack down to the roofline or footer as needed, rebuild with new or salvaged brick per your preference, and finish with a crown and cap.
What Chimney Liner & Rebuild Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Stainless steel liner | $1,950 - $3,400 |
| Flexible liner | $2,200 - $3,800 |
| Partial rebuild | $2,500 - $5,000 |
My Lake Worth home has never had a liner. Do I need one now?
Not always. If the flue is structurally sound and you do not burn, the question is about water entry and gas service, not fire risk. The camera scan gives us the answer in writing. Call (980) 580-8641.
How long does a liner install take in Lake Worth?
Most stainless steel liner installations take one day on site. Rebuild work takes longer, two to four days depending on height. We give you a written schedule before work starts.
Brands We Service in Lake Worth
We work on chimneys with components from Copperfield, DuraFlex, HeatShield, and Gelco. The parts we need for Lake Worth work are stocked through our buying network, which keeps lead times short. See our brands for the full list of what we service and install.
Pricing for Chimney Cleaning in Lake Worth, FL
| Service | Typical range in Lake Worth |
|---|---|
| Annual sweep with Level 1 inspection | $189 - $329 |
| Level 2 inspection with camera scan | $249 - $479 |
| Creosote removal add-on | $89 - $189 |
| Soot removal add-on | $89 - $189 |
| Mortar repointing | $42 - $78 / sq ft |
| Spalling brick repair | $52 - $90 / sq ft |
| Chimney waterproofing | $349 - $699 |
| Flashing repair | $299 - $649 |
| Stainless steel liner | $1,950 - $3,400 |
| Flexible liner | $2,200 - $3,800 |
| Partial rebuild | $2,500 - $5,000 |
Prices in Lake Worth move up when a chimney is on a three-story building, requires a steep roof access, or has been damaged by storm-driven water intrusion and needs masonry work before a sweep. Every quote we give is written, itemized, and delivered before any work starts.
Neighborhoods We Serve in Lake Worth
We work throughout Lake Worth and the surrounding pockets of Palm Beach County, typically scheduling within two to three business days for standard sweeps and inspections.
- Historic Downtown Lake Worth
- College Park
- Parrot Cove
- Mango Grove
- Sunset Ridge
Service Area - Cities Near Lake Worth
Beyond Lake Worth, our crews cover the neighboring communities along the coast and inland. That includes Wellington, FL, Royal Palm Beach, FL, Boynton Beach, FL, and West Palm Beach, FL. Scheduling is coordinated from our Miami (South FL) office, with crews serving Lake Worth locally.
Serving Lake Worth, FL - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Lake Worth
Standard sweeps and inspections are usually scheduled within two to three business days. Post-storm inspection requests, especially after hurricane season blows caps and crowns loose, get priority where safety is a concern. Call (980) 580-8641 to check the next available slot.
Most cleaning, sweeping, and inspection work does not require a permit. Structural rebuilds or liner installations may, depending on scope and the building department’s current requirements. We can tell you if a permit applies to your job after the inspection.
Some historic-district associations ask for proof of inspection or a copy of the photo report. We provide a documented photo record on every job, which satisfies that request without extra work on your end. It is included as standard under the Haven Standard.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O.