Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Inglewood, CA
Chimney cleaning in Inglewood usually costs between $189 and $329 for a standard sweep with a Level 1 inspection, and most jobs take 60 to 90 minutes. What makes Inglewood different is the housing stock: Craftsman bungalows and Spanish Revival cottages from the 1920s through the 1950s carry original masonry chimneys that often sat dormant for years before a new owner bought the place. We document everything with a camera before we touch anything, so you see exactly what we found and why. Call (980) 580-8641 for a written quote.
Why Inglewood Homes Are Different
Inglewood’s mild Mediterranean climate means fireplaces run maybe a handful of times each winter, if at all. That sounds like good news until you understand what happens to a flue that sits idle for years: the coastal marine layer rolling in from a few miles away keeps moisture inside the masonry, and that moisture does slow, steady damage to mortar joints and clay flue tiles. Homes along the LAX flight approach corridors get an additional layer of particulate soot settling on crowns and caps, even when the fireplace is never lit.
The 1994 Northridge earthquake left a mixed legacy across Inglewood. Some chimneys were properly rebuilt afterward, but many received cosmetic patchwork that failed internally years ago. When we camera-scan a chimney in the older bungalow blocks around the city, we frequently find European starling nests, raccoon debris, and spalling brick that has nothing to do with how often the fireplace was used. The hazard in Inglewood is rarely creosote from heavy burning. It’s structural decay and animal intrusion in chimneys that sat unchecked for a decade.
Our Main Inglewood Services
Inglewood homeowners call us most often about two things beyond the basic sweep: fireplaces that don’t draw properly, and caps or crowns that have deteriorated under years of LAX-adjacent soot and marine moisture. Both services get the same camera documentation and written pricing as every other job we do.
Fireplace Services in Inglewood
Older Inglewood fireplaces often have original dampers that no longer seal, smoke chambers with rough corbeled brick that traps soot, and hearths that have settled unevenly. We inspect the entire firebox, damper, and smoke chamber, then show you photos of what we find before recommending any work. Fireplace Services in Inglewood covers everything from damper replacement to full firebox repair, each quoted in writing before we start.
Chimney Cap & Crown in Inglewood
A cracked crown or missing cap on an Inglewood chimney lets rain and marine-layer moisture straight into the flue, and that accelerates spalling and mortar erosion faster than anything else. Under the LAX approach path, caps also catch a steady film of aviation particulates that grinds into the metal over time. Chimney Cap & Crown in Inglewood details how we assess crown integrity, replace damaged caps, and waterproof the crown to stop water intrusion at the top.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Inglewood
Chimney cleaning in Inglewood is less about heavy creosote and more about clearing what accumulated during years of disuse: bird nests, raccoon debris, fallen mortar, and the fine soot that coats a flue even when the fireplace was never lit. The city’s 1920s-to-1950s housing stock means most flues we sweep are original clay tile, and many have never been camera-inspected. That’s why every cleaning we do is paired with a Level 1 or Level 2 inspection, documented with photos as required by Clause 4 of the Haven Standard. For a full breakdown of what a sweep covers, see our Chimney Sweep service page.
Level 1 Inspection
Signs you need it
You use your fireplace regularly and nothing has changed about how it performs.
What it costs in Inglewood
A Level 1 inspection in Inglewood typically runs $149 to $249 when paired with a sweep.
How we do it
We check the accessible portions of the flue, damper, firebox, and exterior, then document everything with photos you keep.
Level 2 Inspection
Signs you need it
You just bought the house, the chimney sat unused for years, the 1994 Northridge quake may have damaged it, or you’re switching fuel types.
What it costs in Inglewood
A Level 2 inspection in Inglewood typically runs $289 to $449, depending on roof access and flue configuration.
How we do it
We run a camera down the full flue length and photograph the interior, the smoke chamber, and the exterior crown, then walk you through every image.
Creosote Removal
Signs you need it
You see black, tar-like buildup on the damper or firebox walls, or you smell a strong campfire odor inside the house.
What it costs in Inglewood
Creosote removal in Inglewood adds $75 to $175 to a standard sweep, depending on the creosote class.
How we do it
We identify the creosote stage by camera, then use rotary brushes and, when necessary, chemical treatment to break down the glaze safely.
Soot Removal
Signs you need it
Black dust accumulates on the mantel or hearth, or smoke puffs back into the room when you light a fire.
What it costs in Inglewood
Soot removal as part of a standard sweep in Inglewood runs $189 to $329 all-in for a single-flue chimney.
How we do it
We brush the flue from top to bottom with a properly sized brush, vacuum the firebox and smoke shelf, and confirm clearance with the camera.
Annual Sweep
Signs you need it
It’s been more than 12 months since the last cleaning, or you burn more than a cord of wood per season.
What it costs in Inglewood
An annual sweep in Inglewood with a Level 1 inspection typically runs $189 to $329.
How we do it
We sweep the flue, clean the damper and smoke chamber, and leave you with a photo record of the condition before and after.
What Chimney Sweep Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Standard sweep + Level 1 inspection | $189 - $329 |
| Level 2 camera inspection | $289 - $449 |
| Creosote removal add-on | $75 - $175 |
How often should I have my Inglewood chimney swept?
Once a year, even if you rarely use the fireplace. Inglewood’s marine moisture and LAX soot accumulate in idle flues, and animals move in fast when a chimney sits quiet for a season. Call (980) 580-8641 to book.
Does a dormant chimney in Inglewood still need cleaning?
Yes, often more than a regularly used one. Dormant flues collect nests, debris, and moisture-driven mortar erosion that a camera inspection reveals immediately. We’ll show you the photos before recommending anything.
Chimney Repair in Inglewood
Chimney repair in Inglewood almost always traces back to two things: the 1994 Northridge earthquake and the marine layer that keeps moisture moving through old mortar. Homes built between the 1920s and 1950s carry unreinforced masonry that was never designed for seismic movement, and many repairs done in the 1990s were cosmetic at best. When we camera-scan these chimneys, we find failed mortar joints, spalled brick faces, and flashing that separated from the roofline years ago. Our Chimney Repair hub covers the full repair scope, from repointing to rebuilds.
Mortar Repointing
Signs you need it
Mortar joints look recessed, crumbly, or sandy, and you can scrape out material with a screwdriver.
What it costs in Inglewood
Repointing in Inglewood typically runs $45 to $90 per square foot for standard tuckpointing work.
How we do it
We grind out deteriorated mortar to a proper depth, pack in fresh mortar matched to the original color and strength, then tool the joints to match the surrounding brick.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, popping off, or leaving rust-colored dust and fragments on the roof or ground below.
What it costs in Inglewood
Spalling brick repair in Inglewood typically runs $350 to $750 per section, including brick replacement and mortar work.
How we do it
We remove the damaged brick, identify the moisture source causing the spalling, replace the units with matched material, and apply a breathable waterproofing where appropriate.
Chimney Waterproofing
Signs you need it
Efflorescence, white chalky deposits, or persistent damp spots appear on the chimney interior or exterior masonry.
What it costs in Inglewood
Chimney waterproofing in Inglewood typically runs $275 to $600, depending on chimney height and surface area.
How we do it
We clean the masonry surface, repoint any failed joints, and apply a vapor-permeable siloxane water repellent that lets moisture escape while keeping rain and marine mist out.
Flashing Repair
Signs you need it
Water stains appear on the ceiling near the chimney, or you can see gaps and lifted metal where the chimney meets the roof.
What it costs in Inglewood
Flashing repair in Inglewood typically runs $250 to $650 for standard step flashing work.
How we do it
We remove the old flashing, inspect the roof deck underneath for rot, install new step and counter flashing, and seal the transitions with proper fire-rated sealant.
Chimney Rebuilding
Signs you need it
The chimney leans visibly, large cracks run through the masonry, or previous repairs have failed and water intrusion is widespread.
What it costs in Inglewood
Chimney rebuilding in Inglewood typically runs $1,800 to $6,500 depending on height, access, and how much of the structure must come down.
How we do it
We demolish the compromised section, rebuild with new brick or block to current code, install a proper cap and flashing, and document the full rebuild with photos.
What Chimney Repair Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Mortar repointing (per sq ft) | $45 - $90 |
| Spalling brick repair (per section) | $350 - $750 |
| Chimney waterproofing | $275 - $600 |
How do I know if my Inglewood chimney has earthquake damage?
A camera inspection shows cracked flue tiles and shifted masonry that a visual check from the ground misses. If the home predates 1994 and no repair record exists, we recommend a Level 2 inspection. Call (980) 580-8641 to schedule.
Can you repoint a chimney without a full rebuild?
Usually, yes, if the brick itself is sound and the structure is stable. We’ll show you camera images of the joints and the structural condition before recommending the lightest repair that actually works.
Chimney Liner & Rebuild in Inglewood
Chimney liner and rebuild work in Inglewood is driven by a combination of age, moisture, and old construction standards. Many 1920s-to-1950s Inglewood chimneys were built with unlined masonry or clay tiles that have cracked from seismic movement and decades of marine-layer moisture cycling. The result is a flue that can leak heat and gases into the wall cavity, which is precisely the failure a camera inspection is designed to find. For a deeper look at liner options and rebuild scope, see our Chimney Liner & Rebuild page.
Stainless Steel Liner
Signs you need it
Your clay tile liner is cracked, spalled, or missing sections, or you’re installing a new gas or wood appliance that requires a properly sized flue.
What it costs in Inglewood
A stainless steel liner in Inglewood typically runs $2,100 to $3,900 installed, depending on flue height and insulation requirements.
How we do it
We measure the flue precisely, select the correct diameter liner from Gelco or Olympia Chimney stock, insulate where code requires, and pull it through from the top with a secure top plate and rain cap.
Flexible Liner
Signs you need it
Your flue has offsets or bends that make rigid liner impractical, or you’re relining an existing masonry chimney without opening the walls.
What it costs in Inglewood
A flexible liner in Inglewood typically runs $1,900 to $3,600, similar to rigid liner with slight variation based on the flue path.
How we do it
We run a continuous flexible stainless liner through the existing flue path, connect it to the appliance with the proper connector, and terminate it with a listed cap and storm collar.
Liner Replacement
Signs you need it
Your existing liner is perforated, corroded, or the wrong size for the appliance currently installed.
What it costs in Inglewood
Liner replacement in Inglewood typically runs $1,900 to $3,900 for a full stainless reline, including removal of the old liner where accessible.
How we do it
We remove the old liner, camera-scan the chimney to confirm clear passage, then install the new liner with proper insulation and terminations, documenting each step photographically.
Partial Rebuild
Signs you need it
The top few feet of the chimney are spalling or leaning, but the lower structure and flue are intact.
What it costs in Inglewood
A partial rebuild in Inglewood typically runs $1,500 to $3,800, depending on how many courses of brick come down.
How we do it
We dismantle the damaged upper section, rebuild it with matched masonry, install a new crown and cap, and flash the repair into the existing structure.
Full Chimney Rebuild
Signs you need it
The chimney is structurally compromised from the roofline up, or interior damage extends through the entire flue and smoke chamber.
What it costs in Inglewood
A full chimney rebuild in Inglewood typically runs $6,000 to $12,000 for a complete tear-down and reconstruction to code.
How we do it
We demolish the existing chimney, rebuild from the firebox or roofline up with new brick, liner, cap, and flashing, and deliver a documented photo record of every stage.
What Chimney Liner & Rebuild Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Stainless steel liner (installed) | $2,100 - $3,900 |
| Flexible liner (installed) | $1,900 - $3,600 |
| Full chimney rebuild | $6,000 - $12,000 |
Do I really need a new liner, or can the old one be patched?
We won’t recommend a liner replacement unless the camera shows cracks, gaps, or perforations that a patch cannot safely address. You’ll see the images yourself before any work is quoted. Call (980) 580-8641 to book an inspection.
How long does a stainless liner last in Inglewood’s climate?
A properly installed stainless liner typically lasts 20 to 30 years, even with Inglewood’s marine moisture, because stainless resists the corrosion that eats through older galvanized or clay systems. We source liners from Gelco and Olympia Chimney, procured through Haven’s buying network to keep pricing honest.
Brands We Service in Inglewood
We install and service components from our brands, including Gelco stainless liners, Olympia Chimney caps and terminations, and Famco dampers and flashings. Stock for common Inglewood repairs is kept locally, which means most replacement parts go in the same week we write the quote.
Pricing for Chimney Cleaning in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Chimney sweep + Level 1 inspection | $189 - $329 |
| Level 2 camera inspection | $289 - $449 |
| Creosote removal add-on | $75 - $175 |
| Mortar repointing (per sq ft) | $45 - $90 |
| Spalling brick repair (per section) | $350 - $750 |
| Chimney waterproofing | $275 - $600 |
| Stainless steel liner (installed) | $2,100 - $3,900 |
| Partial rebuild | $1,500 - $3,800 |
| Full chimney rebuild | $6,000 - $12,000 |
Two things push Inglewood pricing higher than the county average: roof access on steep Spanish Revival pitches, and the extra cleaning required when marine moisture has turned soot into a hardened glaze. Whatever the job, your price is written before we start and includes the full photo record. No surprises, no “while we’re here” additions.
Neighborhoods We Serve in Inglewood
We work in every Inglewood neighborhood, from the Craftsman bungalows of Morningside Park to the postwar tract homes near Centinela and the Spanish Revival cottages around North Inglewood. Our crews typically reach most Inglewood addresses within one to two business days of your call for standard sweeps and inspections.
- Morningside Park
- North Inglewood
- Century Heights
- Crenshaw-Imperial
- Fairview Heights
Service Area - Cities Near Inglewood
Beyond Inglewood, our crews serve Hawthorne, CA, Culver City, CA, Lawndale, CA, and Manhattan Beach, CA. Scheduling is coordinated from our Los Angeles office, with local crews dispatched across the South Bay and Westside. If you’re in a neighboring city and need a sweep or camera inspection, call the same number and we’ll route you to the right crew.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Inglewood
Standard sweeps and inspections are usually scheduled within one to two business days. Rebuilds and liner work depend on material availability, but we carry common Inglewood replacement parts locally. Call (980) 580-8641 and we’ll give you a specific date when you book.
Simple sweeps, inspections, and minor repairs like repointing generally don’t require a permit. Full rebuilds may trigger a city permit, and we’ll tell you in writing if yours does before any work starts. Call (980) 580-8641 and we’ll walk you through what applies to your property.
Always. Every visit includes a camera scan and a photo record you keep, so you see the flue, the crown, and any damage with your own eyes before a quote is written. If we recommend work, we’ll show you exactly why in the images.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.