Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Immokalee, FL
Chimney cleaning in Immokalee usually means clearing a metal flue pipe that has sat open and unused through ten months of subtropical heat, not scraping creosote off masonry. Most homes here are manufactured or mobile builds from the 1970s through 1990s, and their venting systems fail in very predictable ways: corroded thin-wall pipe, missing caps, and animal nests. If you need a sweep or flue inspection in Immokalee, call Emberly Chimney Cleaners at (980) 580-8641 for a written price before any work begins.
Why Immokalee Homes Are Different
Immokalee’s housing stock changes the job completely. The overwhelming majority of residential structures are manufactured homes, mobile homes, and simple wood-frame agricultural-worker rentals. Almost none have a traditional masonry chimney. Instead, wood-burning appliances vent through metal B-vent or single-wall flue pipe, which corrodes quickly in Collier County’s high-humidity inland air. We regularly find pipe that looks intact from the ground but has rusted through at a seam or elbow, letting exhaust into a wall cavity.
The climate is the bigger variable. Immokalee averages fewer than five meaningful heating days per year, so any wood stove or fireplace sits dormant and open for months. That warm, humid, sheltered void is ideal for chimney swifts, raccoons, and roach colonies. Creosote glazing, the problem that defines chimney cleaning in most of the country, is almost nonexistent here. In Immokalee, our work is pest-intrusion removal, moisture damage assessment, and flue-cap replacement far more often than traditional sweep work. That is a fundamentally different service profile than even nearby Naples.
Our Main Immokalee Services
Two services account for most of the calls we take from Immokalee homeowners, and both have dedicated pages with local pricing and detail.
Fireplace Services in Immokalee
Factory-built fireplaces in Immokalee manufactured homes often look fine at the firebox but hide rust damage in the flue above. We inspect the full vent path, test for proper draft, and document every finding with photos before recommending anything. Fireplace Services in Immokalee covers inspection, repair, and maintenance for metal and prefab units.
Chimney Cap & Crown in Immokalee
Missing or deteriorated caps are the single most common defect we document in Immokalee. An uncapped metal flue is an open invitation to nesting swifts and driving rain, both of which accelerate corrosion. Chimney Cap & Crown in Immokalee has more on what we install and what it costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Immokalee
Chimney sweep in Immokalee starts with the reality that most flue systems here are thin-wall metal pipe, not masonry. Many have been dormant for years, capped poorly or not at all, and the first “cleaning” is often removing a bird nest, a raccoon cache, or three inches of rust scale. We approach every Chimney Sweep visit as an inspection first, because in Immokalee the visible debris is rarely the only problem.
Level 1 Inspection
Signs you need it
The flue hasn’t been looked at in more than two years, or you’ve never had one since buying the home.
What it costs in Immokalee
A Level 1 inspection in Immokalee typically runs $150 to $350, depending on access and the height of the flue.
How we do it
We examine the accessible portions of the flue, appliance connections, and cap, then document condition with photos and a written report.
Creosote Removal
Signs you need it
You burn wood regularly in a manufactured home fireplace and notice a dark, tar-like glaze inside the flue visible from the firebox.
What it costs in Immokalee
Creosote removal in Immokalee typically costs $250 to $650 when glaze is present and needs mechanical removal.
How we do it
We use rotary loops and wire brushes sized to the flue to break glaze into removable waste, then vacuum and document the result.
Annual Sweep
Signs you need it
You use the wood appliance at least a few times each winter or have any history of animal activity in the flue.
What it costs in Immokalee
A standard sweep in Immokalee starts at $175 and may reach $400 when nests or heavy debris add removal time.
How we do it
We brush the full flue length, remove all debris, check the cap and connection, and leave a photo record of the clean flue.
What Chimney Sweep Costs in Immokalee
| Item | Typical range in Immokalee |
|---|---|
| Level 1 Inspection | $150 - $350 |
| Creosote Removal | $250 - $650 |
| Annual Sweep | $175 - $400 |
Can I clean my own flue pipe in Immokalee?
You can brush a straight, accessible flue yourself, but without a camera you will miss rust-through, separated seams, and nests behind the appliance connection. A documented inspection is the part worth paying for.
What if there are chimney swifts nesting right now?
Leave them alone. Swifts are federally protected under the Migratory Bird Treaty Act, and disturbing an active nest is a violation. We schedule around the migration window, usually late August through October, and remove empty nests after the birds leave.
Chimney Repair in Immokalee
Chimney repair in Immokalee usually means repairing metal vent systems and the few masonry structures that exist on older or custom-built homes. Corrosion at seams and elbows is our most common finding on Chimney Repair calls, followed closely by flashing leaks where pipe penetrates a manufactured home roof. The fix is rarely about bricks; it’s about sealing the exhaust path so it actually vents.
Mortar Repointing
Signs you need it
Mortar joints on a masonry chimney show erosion, cracking, or missing sections, especially after heavy summer rain.
What it costs in Immokalee
Repointing in Immokalee typically costs $400 to $1,500 depending on access and joint volume.
How we do it
We grind out loose mortar to a proper depth, pack in new mortar matched to the existing joint profile, and document the repair.
Chimney Waterproofing
Signs you need it
Masonry surfaces absorb water and stay dark for hours after rain, or efflorescence (white salt deposits) appears on the brick.
What it costs in Immokalee
Waterproofing in Immokalee generally runs $350 to $900, varying with chimney size and surface prep.
How we do it
We clean the surface, repair any spalling, then apply a vapor-permeable siloxane sealant that lets the masonry dry while shedding rain.
What Chimney Repair Costs in Immokalee
| Item | Typical range in Immokalee |
|---|---|
| Mortar Repointing | $400 - $1,500 |
| Chimney Waterproofing | $350 - $900 |
| Flashing Repair | $300 - $800 |
How do I know if my flue pipe has rusted through?
Look for staining on ceilings or walls near the pipe run, a persistent stale smoke smell even when the appliance is cold, or visible orange bloom on the pipe exterior. We confirm with a camera scan.
Can a corroded flue pipe be repaired or patched?
In most cases no. Thin-wall metal flue pipe that has rusted through needs replacement, not patching, because exhaust leakage inside a wall cavity is a carbon monoxide risk. We give you a written scope before any replacement work.
Chimney Liner & Rebuild in Immokalee
Chimney liner and rebuild work in Immokalee is almost entirely about stainless steel liners in manufactured or prefab applications, not large masonry rebuilds. Metal systems corrode from the inside out in Collier County humidity, and the liner is the safety layer that keeps exhaust separated from your walls. We handle Chimney Liner & Rebuild work with a written price and a photo record, because this is exactly the kind of repair a homeowner cannot verify without a camera.
Stainless Steel Liner
Signs you need it
The existing liner is rust-pitted, separated at a seam, or missing entirely inside the flue pipe.
What it costs in Immokalee
A stainless steel liner in Immokalee typically costs $1,500 to $4,000 including installation.
How we do it
We measure the flue, size a liner from brands like Gelco or Olympia Chimney, pull it into place, insulate as needed, and camera-verify the final run.
Liner Replacement
Signs you need it
A previous liner is cracked, collapsed, or undersized for the appliance it serves.
What it costs in Immokalee
Liner replacement in Immokalee generally runs $1,500 to $4,000 depending on flue length and access.
How we do it
We remove the damaged liner, prep the flue path, install the new liner, and document the full run with camera images.
What Chimney Liner & Rebuild Costs in Immokalee
| Item | Typical range in Immokalee |
|---|---|
| Stainless Steel Liner | $1,500 - $4,000 |
| Flexible Liner | $1,200 - $3,200 |
| Partial Rebuild | $2,500 - $7,000 |
Does a manufactured home need a liner if the pipe looks fine from outside?
A visual check from the ground misses interior rust and seam separation. If the appliance is used at all, we recommend a camera inspection before assuming the existing flue is safe.
What is the difference between a flexible liner and stainless steel liner?
Flexible liners are stainless steel but corrugated for easier installation through offsets. Rigid stainless liners are straight and smoother, so they draft better, though many Immokalee flues require the flexible version to navigate sharp turns.
Brands We Service in Immokalee
We work on flue and vent systems from Gelco, Olympia Chimney, Famco, and Copperfield, and stock common replacement parts for quick turnaround on Immokalee jobs. See our brands page for the full list.
Pricing for Chimney Cleaning in Immokalee, FL
| Service | Typical range in Immokalee |
|---|---|
| Level 1 Inspection | $150 - $350 |
| Level 2 Inspection | $275 - $500 |
| Creosote Removal | $250 - $650 |
| Soot Removal | $150 - $350 |
| Annual Sweep | $175 - $400 |
| Mortar Repointing | $400 - $1,500 |
| Chimney Waterproofing | $350 - $900 |
| Flashing Repair | $300 - $800 |
| Stainless Steel Liner | $1,500 - $4,000 |
| Flexible Liner | $1,200 - $3,200 |
| Liner Replacement | $1,500 - $4,000 |
| Partial Rebuild | $2,500 - $7,000 |
In Immokalee, price moves with two variables: how much animal or insect debris has to come out before work starts, and how much corrosion has already compromised the metal flue system. Every job is quoted in writing before work starts, so the price you approve is the price you pay.
Neighborhoods We Serve in Immokalee
We cover all of Immokalee and the surrounding agricultural residential pockets, including these areas:
- Downtown Immokalee
- Farm Worker Village
- Lake Trafford area
- Ave Maria
- North Immokalee / SR-29 corridor
Response time across the Immokalee service area is typically two to four business days for non-urgent scheduling, with faster options during the August-to-October migration window when nests should be removed promptly after birds leave.
Service Area - Cities Near Immokalee
Emberly Chimney Cleaners also serves nearby markets where flue profiles differ: Naples, FL has more masonry fireplaces, Bonita Springs, FL and Estero, FL both mix prefab and masonry units, and Lehigh Acres, FL shares Immokalee’s manufactured-home pattern. Scheduling is coordinated from our South FL office; crews serve Immokalee locally.
Serving Immokalee, FL - Our Local Coverage Area
We’re based in the Immokalee area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Immokalee
For most cleanings and inspections, we schedule within two to four business days. Nest removal jobs in late August through October get priority because the protected-bird window is short and waiting another year is avoidable.
Most cleaning, inspection, and liner replacement jobs on existing systems do not require a permit. If a partial or full rebuild changes the flue path, permitting can come into play, and we flag that in the written scope before any work begins.
We inspect as part of the job, and we always provide a written price before work starts. The camera inspection is included on every visit, and you get a photo record of what we found, whether we clean, repair, or simply tell you the system is fine.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Immokalee Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M.