Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Fireplace Services Across Irving
Fireplace service in Irving usually runs between $129 and $540 depending on what’s actually wrong, and most jobs are completed in a single visit. We’ve worked on the ranch-style and split-level homes that dominate Irving’s neighborhoods long enough to know what fails in them and why. That matters because a fireplace in a 1974 Valley Ranch home has different problems than one in a 2015 build near Las Colinas. If you need a fireplace inspected, cleaned, or repaired, call (980) 580-8641 and we’ll give you a written price before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Emberly Chimney Cleaners Is Irving’s Preferred Fireplace Services Company
Irving has one of the most concentrated stocks of 1960s-to-1980s masonry fireplaces in the Dallas-Fort Worth metro. The city’s residential buildout peaked almost exactly alongside DFW Airport’s construction in the late 1960s and early 1970s, which means thousands of original clay-tile flue systems are now 40 to 55 years old and showing the same failure patterns at the same time. We see those failures every week. That local repetition is what lets us write a precise scope and a precise price before a tech ever rings your doorbell.
Our crews work in every part of Irving, from Valley Ranch on the northwest side down to the established neighborhoods south of Highway 183. Homeowners here tend to research before they call, and we respect that. We publish our pricing structure. We send a photo record after every visit. We put the tech’s name and license information on the page. And since 2009 we’ve completed more than 38,000 chimney inspections and cleanings, each one documented and each one quoted in writing before work began. That practice is required under Clause 4 of the Haven Standard, the inspection and pricing standard our company has worked to since day one.
Corrine Halstead leads the team and holds every job to the same standard whether it’s a $129 sweep or a full firebox rebuild. If a repair recommendation can’t be shown to you on camera, it doesn’t get made. That’s not a courtesy. It’s the operating rule.
Our Fireplace Services in Irving
Gas Fireplace Service
Most gas fireplaces in Irving are retrofit installations, gas log sets placed inside original wood-burning fireboxes. That retrofit is often missing the stainless liner it should have had from day one. We service the gas valve, burner, pilot assembly, and log set, but before we do any of that we run the inspection camera up the flue to verify what the gas is actually venting into. In Irving’s 1960s-1980s housing stock, that step catches more code-compliance problems than any other part of the service call. A standard gas fireplace service in Irving typically runs $129-$229.
Wood Burning Fireplace
Wood burning fireplaces in Irving work hard for short, intense stretches. North Texas winters are mild most of the season, then a hard freeze hits and the fireplace runs full-tilt for three days straight. That infrequent high-intensity burn cycle is the exact wrong pattern for creosote formation. We see fireboxes in Las Colinas, Valley Ranch, and the older ranch neighborhoods around MacArthur Boulevard that look clean on the glass but carry third-degree glazed creosote further up the flue. A sweep and Level 2 camera inspection for a wood burning fireplace in Irving runs $189-$289.
Fireplace Insert
Fireplace inserts are the right fix for a lot of Irving’s older fireplaces, particularly when the original clay tile liner is cracked and the homeowner wants actual heat instead of a decorative flame. We install and service inserts that tie into proper stainless liners, and we source materials from DuraFlex and Copperfield through Haven’s buying network to keep pricing honest. An insert installation in Irving typically runs $4,500-$7,200 depending on liner length and firebox dimensions, and every quote is written before anything is ordered.
Damper Repair
A damper that won’t seal is one of the most common issues in Irving homes, mostly because the original cast-iron dampers installed in the 1970s have warped or rusted through after decades of heat cycling. A broken damper lets conditioned air escape all summer and can allow rain and pests in during the off season. Damper repair or replacement in Irving generally runs $180-$420, and we carry replacement parts for the original damper brands found in Irving’s tract-housing stock.
BeforeAfterTrusted Brands We Service in Irving
We work on gas and wood systems from the major manufacturers homeowners in Irving actually have installed, and we stock common replacement parts locally. That means faster turnaround on repairs and fewer return trips. The brands we carry and service most often include Famco for dampers, DuraFlex for stainless liners, and Homestead-equivalents where the original equipment has been discontinued. If your fireplace insert or gas log set came from a brand not listed here, call (980) 580-8641 and ask. Chances are we service it, and if we don’t, we’ll tell you honestly rather than improvise.
Common Fireplace Services Problems We See in Irving Homes
- Retrofitted gas logs without a proper stainless liner. Irving’s 1960s-1980s tract homes were built for wood burning, then converted to gas when the new homeowner wanted convenience. The gas log set went in, the liner didn’t, and the original clay tile flue is now handling temperatures and moisture it was never designed for. This is a code-compliance miss we find in Irving more than almost anywhere else we work.
- Cracked clay tile liners from Blackland Prairie soil movement. North Texas sits on expansive clay that swells after rain and shrinks during drought. That seasonal shift applies pressure to chimney structures over decades, and the result is cracked flue tiles that let heat and gases reach combustible framing. Homes in Irving’s ranch tracts are especially vulnerable because they’re old enough to have cycled through 40-plus years of soil movement.
- Third-degree glazed creosote hiding behind a clean firebox. After freeze events like February 2021, Irving residents fire up fireplaces that have sat dormant for months. That intense, infrequent burn pattern produces a hard, shiny creosote that a standard brush can’t remove. The firebox looks fine. The flue is a different story.
- Rusted factory-built fireboxes in decorative brick chases. Valley Ranch specifically has a concentration of 1980s homes where the chimney is a brick-clad chase housing a factory-built metal firebox, not a full masonry system. When the firebox rusts through at the bottom seam, the homeowner has no idea because everything visible from the outside says “masonry chimney.”
Pricing for Fireplace Services in Irving, TX
You should know what things cost before you schedule anything. A gas fireplace service call in Irving runs $129-$229. A wood burning fireplace sweep with a Level 2 camera inspection runs $189-$289. Damper repair lands between $180 and $420 depending on whether the existing damper can be salvaged. Firebox repair varies the most: a cracked refractory panel replacement might be $350-$650, while a full firebox rebuild in a 1970s masonry fireplace can run $2,800-$5,400. Fireplace conversions, like going from wood to gas, typically fall between $2,000 and $3,500 including the gas log set and proper liner. We put the actual price in writing before anyone starts, and our Fireplace Services in Irving pricing doesn’t change after the tech arrives. Every quote includes a documented photo record when the work is done, and it’s all backed by the 365-Day Done Right Promise: if it’s not done right, we make it right.
We Also Serve Cities Near Irving
We work throughout the Dallas-Fort Worth metro from our DFW office, with crews that handle Dallas, Balch Springs, Mesquite, and Lancaster in addition to every Irving neighborhood. If you’re on the edge of a service area, call (980) 580-8641 and we’ll tell you straight whether we can get there without wasting your time.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Irving
Not necessarily, and the only way to know is a camera inspection of the flue. A 1970s clay tile flue in Irving has been through 40-plus years of Blackland Prairie soil movement, and the most likely condition is cracked tiles with separated mortar joints. If cracks are minor, you may be able to burn wood safely for now. If heat or gases are reaching the combustibles around the flue, you shouldn’t burn at all until the liner is repaired or replaced. Call (980) 580-8641 and we’ll show you exactly what the camera sees, then give you a written price for whatever is actually needed.
The primary risk is that gas logs vent into a clay tile flue that was never sized or rated for gas appliances, which can lead to carbon monoxide entering the home. The secondary risk is moisture damage, because gas combustion produces water vapor that deteriorates old mortar and tile faster than wood burning does. In Irving’s older housing stock, the proper fix is almost always a stainless liner sized for the gas log set. The fix itself is straightforward. It’s the fact that it was skipped in the first place that creates the problem.
Yes, and it’s one of the most dangerous patterns we see in Irving. Infrequent, high-intensity burning after long dormant stretches causes glazed creosote, a hard third-degree deposit that can look like shiny black glass. A visual check of the firebox won’t reveal it because it forms further up the flue where temperatures cool. A brush can’t remove it. Glazed creosote is the fuel that feeds chimney fires. If your burn pattern is “only during hard freezes,” you should have the flue camera-inspected before the next one. The inspection costs less than the repair that follows an untreated chimney fire.
Your neighbor is probably right. Valley Ranch was built largely in the 1980s, and a high proportion of its brick chimneys are actually decorative chases housing factory-built metal fireboxes. The only way to know is a Level 2 camera inspection, which shows the difference in about 30 seconds. In a Valley Ranch home, our tech found a factory-built firebox rusted through at the bottom seam inside a brick chase. The homeowner had scheduled a gas fireplace service assuming they had a full masonry system. We documented the rust with our inspection camera before recommending any repair, which avoided a completely unnecessary upsell and addressed the actual safety problem. In Valley Ranch, this check is standard on every fireplace service call.
Not every year, but more often than “never.” The NFPA standard that governs chimney work recommends a Level 2 camera inspection whenever conditions change: a new appliance, a new liner, a chimney fire, or a home purchase. In Irving specifically, soil movement and the age of original flue systems mean a camera inspection every two to three years is reasonable for light-use fireplaces. For heavy-use fireplaces, annual is warranted. If you’ve just bought an Irving home built before 1990 and you’ve never had the flue inspected, that’s worth doing before the next burning season. Call (980) 580-8641 for a free estimate, and we’ll give you a written price before anything happens.
If your Irving fireplace hasn’t been camera-inspected in the past few years, or if you’ve been told you need a repair you haven’t been able to verify, call (980) 580-8641. We’ll put a technician on it and show you exactly what we find before a single dollar changes hands.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Irving under the Haven Standard since 2009.