Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Wichita
A chimney cap and crown in Wichita runs $185-$620 for standard cap installation, and $340-$890 for a poured concrete crown repair, depending on flue configuration and existing masonry condition. Most jobs in the area are completed in a single visit, often within 4-7 business days of booking. We serve the entire metro, from College Hill to Delano to Derby, and our crews are out on Wichita roofs every week, not once a month.
We’re Emberly Chimney Cleaners, and we’ve inspected and cleaned more than 38,000 chimneys since 2009. Every one of those jobs came with a written price before work started and a documented photo record when it was done. If you’re looking at a damaged crown or a missing cap in Wichita, call (980) 580-8641 for a free estimate. We’ll tell you what we find, show you the camera footage, and hand you a written scope before you spend a dollar.
Why Emberly Chimney Cleaners Is Wichita’s Preferred Chimney Cap & Crown Company
Wichita tells you a lot about a chimney company faster than most places do. The wind here exposes bad work fast. A cap that’s been caulked on instead of mechanically fastened doesn’t last a single Kansas spring. A crown poured without a drip edge starts shedding within two winters. Homeowners in College Hill, Riverside, and the Crown Heights area have learned to ask for documentation, because too many fly-by-night operations count on the customer never getting on the roof to look.
Our name is the inspection standard we work to: NFPA 211 Level 2. Camera down the flue. Written price before work begins. A photographed record when it’s done. We made that the default in 2009, long before insurers in Wichita started asking for it, and it became Clause 4 of the Haven Standard we work under on every job. If you want to see exactly what your cap and crown look like right now, we’ll show you. That’s the whole point.
Every tech who shows up at a Wichita home is background-checked and uniformed, with a license number displayed on the page and a named technician assigned to the job. You get a text when they’re on the way. The work is backed by our 365-Day Done Right Promise: if it’s not done right, we make it right. Written warranty, written scope, written price. Always.
Our Chimney Cap & Crown Services in Wichita
Cap and crown work in Wichita is not a one-size-fits-all order. The wind, the freeze-thaw cycle, and the age of the housing stock here create specific failure patterns. Here’s what we do about them.
Cap Installation
A properly installed cap on a Wichita chimney does two jobs: it keeps wind-driven rain out of the flue, and it keeps chimney swifts out of the flue. The swifts are a federal issue, and we’ll get to them below. Most cap installs in Wichita run $185-$420 for a single-flue unit, and we favor stainless steel caps from Gelco and Copperfield because they’re still on the chimney five years later when the painted steel caps from big-box stores are rusted through at the fasteners. Installation is mechanical, not adhesive. That matters in wind like we get here.
Cap Replacement
Wichita’s sustained 13+ mph average winds, among the highest for a large continental U.S. city, regularly blast lightweight caps right off their mounting plates. If you can see a cap lying in the yard after an April squall, that’s the common story. Replacement runs $210-$520 depending on flue count and whether the old mounting hardware damaged the crown underneath. We’ll check for that damage, because it’s usually there.
Crown Repair
The crown is the concrete slab that caps the masonry at the top of the chimney. On Wichita’s 1950s-70s brick ranch homes built for Cessna, Beechcraft, and Boeing workers, those original crowns are now 50-70 years old. Daily temperature swings of 40 degrees or more in winter and early spring saturate the concrete, freeze it, and crack it. The spalling we see on College Hill chimneys is a direct result of that cycle. Crown repair in Wichita typically runs $340-$890, and we pour Gelco crowns with a proper drip edge so water sheds away from the flue instead of seeping into it.
Crown Coating
A crown that’s still structurally sound but showing hairline cracks can sometimes be saved with a flexible sealant coating instead of a full tear-out and re-pour. Coating runs $220-$410 in Wichita. But we don’t coat a crown we wouldn’t stand behind. If the camera shows water has already gotten into the flue liner and started spalling the tile, coating just hides the problem. We’ll tell you plainly if a full repair is the honest fix, and we’ll quote both options in writing.
Multi-Flue Cap & Custom Cap
Older Wichita homes in Riverside and Delano often have single-flue masonry chimneys, but the post-war ranches frequently have two or three flues sharing one chimney. A multi-flue cap covers the entire crown and costs $480-$1,200 depending on dimensions. Custom caps, usually for unusually large flues or homeowner spec, run $700-$1,800. We’ll fabricate to your chimney’s exact measurements, not force a stock size onto a 60-year-old footprint.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Wichita
We stock and install materials from Chimney Cap & Crown brands that have earned their place in this market, specifically Gelco, Copperfield, and Olympia Chimney. Gelco crowns and Copperfield caps are the two names we reach for most on Wichita jobs, because they hold up to freeze-thaw and sustained wind better than the commodity stuff. Olympia Chimney hardware covers the odd flue configurations we see on mid-century ranches. We also carry Famco products for specialized venting on gas flues that were converted from wood decades ago and never properly relined. If you need a part for an older installation, we can usually source it and turn the job around within a week, because we’re not ordering from a third-party catalog and hoping.
Common Chimney Cap & Crown Problems We See in Wichita Homes
- Wind-driven rain entering uncapped flues. Wichita’s average wind above 13 mph off the southern Great Plains drives rain horizontally in ways that a gentle vertical drizzle elsewhere never does. An uncapped flue isn’t just an inconvenience in March; it’s a water intake port on a 60-year-old masonry structure.
- Freeze-thaw spalling on original 1950s-70s crowns. The post-WWII brick ranches that dominate Wichita’s housing stock were built with cement crowns that are now five to seven decades old. A 40-degree daily swing in February means the crown freezes and thaws 20 or more times in a single month. Concrete can’t take that forever.
- Chimney swifts nesting in uncapped flues. The swifts return every spring to Riverside and the older west-side neighborhoods. Once eggs are laid, federal law protects them. Cleaning and repair work on that chimney legally stops until the birds leave in late summer. We push cap installation in late winter for exactly this reason.
- Downdraft from sustained wind. Even a capped chimney can pull smoke back into the house on a windy Wichita day if the cap is the wrong size or style for the flue. We diagnose this during the Level 2 camera scan and size the replacement cap to the actual draft conditions, not just the flue diameter.
Pricing for Chimney Cap & Crown in Wichita, KS
Written ranges for Wichita, current as of this page’s update:
- Single-flue cap installation: $185-$420
- Standard cap replacement: $210-$520
- Multi-flue cap: $480-$1,200
- Custom cap fabrication + install: $700-$1,800
- Concrete crown repair (full re-pour with drip edge): $340-$890
- Crown coating (hairline cracks only): $220-$410
What moves the price within those ranges is the flue count, the roofline height and pitch, the condition of the existing crown or masonry beneath it, and whether we need to remove an old failed cap that’s damaged the mounting area. We give you a written price before any work starts, per Clause 1 of the Haven Standard, and the quote includes the scope, the materials, and the warranty in writing. Bring us a competitor’s written estimate and we’ll give you a free second opinion on it. Call (980) 580-8641 and we’ll schedule the inspection.
We Also Serve Cities Near Wichita
Our full Wichita service area runs beyond the city limits. We regularly handle cap and crown work in Derby, just south on I-35, where the same wind and freeze-thaw pattern applies and the same 1950s-70s ranch housing stock dominates. If you’re in Derby or elsewhere in Sedgwick County, call and ask about our schedule. We’ll fit you in.
Serving Wichita, KS - Our Local Coverage Area
We’re based in the Wichita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Wichita
Wichita’s sustained winds above 13 mph, with stronger gusts off the Plains, push rain sideways into flues and stress caps at their mechanical fasteners from every angle. In College Hill, where we work on 1920s-1940s bungalows alongside 1950s ranches, the common failure we see is a cap that was attached with adhesive or cheap metal straps and has either torn loose or shifted enough to let water run down the outside of the clay flue tile. The long-term fix is a mechanically fastened stainless cap sized to the flue, not a caulk-and-hope job. We quote that install in writing before we touch the roof. Call (980) 580-8641 for a free estimate.
Because once chimney swifts lay eggs inside an uncapped flue, federal law protects them and the chimney is legally off-limits for removal, cleaning, or cap installation until the birds leave in late summer. In Wichita’s older west-side and Riverside neighborhoods, swifts return every April like clockwork and head straight for uncapped masonry flues. A cap installed in February or early March closes the access point before migration. That’s the window. We book late-winter cap work in Wichita specifically to beat the swift migration, and we’ll explain the legal reality if you call us after they’ve already moved in.
Rural wood-stove setups outside Wichita already build creosote faster than urban fireplaces because the stoves run hot and long as a primary heat source. Wind-driven rain through an uncapped or poorly capped flue accelerates the chemical shift from dry, first-degree creosote into hard, tarry third-degree glaze, which is far more flammable and far harder to remove. A properly fitted cap keeps the flue dry, and a sound crown prevents water from soaking down the masonry into the liner, so creosote stays in a removable form and your burning interval doesn’t have to shrink further. In those rural homes, we often recommend a shorter sweeping interval regardless, and we’ll give you honest guidance on burn practice before we hand you the invoice. The camera record from our Level 2 inspection shows you the creosote class in plain terms.
The common failure on Wichita’s 1950s-70s brick ranches built for Cessna, Beechcraft, and Boeing employees is spalling: the original cement crown cracks from decades of freeze-thaw cycling, and chunks of concrete start shedding down the roof. In many cases, the chimney structure itself is still sound. We rake out the loose mortar, form the crown to the correct pitch away from the flue, and pour a new Gelco crown with a proper drip edge. If the crown is only hairline-cracked with no spalling and no water in the liner, a crown coating can buy another several years at lower cost. We decide by camera, not by opinion, and we quote both paths in writing. Call (980) 580-8641 for the inspection.
Yes. A blown-off cap doesn’t just leave the flue open; it often damages the crown and the flue tile underneath when the cap tears loose, and the same storm that took the cap may have shifted flashing or driven debris into the flue. A Level 2 camera inspection, which we include on every visit under Clause 4 of the Haven Standard, shows exactly what’s damaged and what’s still sound. You walk away with a photo record and a written report, and we quote the repair in writing before any work starts. After a Wichita spring storm, call (980) 580-8641 and we’ll get the camera down the flue.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Wichita since 2009.