Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast Chimney Cap & Crown Service Across Murphy
If you own a home in Murphy built after 1995, there’s a good chance your fireplace isn’t masonry at all. It’s a factory-built prefab unit sitting inside a metal chase with a galvanized cap on top. Those original caps are rusting through across Murphy right now, especially in subdivisions like Maxwell Creek, Muirfield, and Rolling Ridge Ranch. A rusted cap lets rain and squirrels into the chase, and that water ends up pooling around your fireplace. We replace and repair caps and crowns across Murphy, and we quote every job in writing before any work starts. Call (980) 580-8641 and we’ll get a technician out to your street, often within a few days.
Why Emberly Chimney Cleaners Is Murphy’s Chimney Cap & Crown Team
Murphy has a specific housing profile. Nearly everything here went up between 1998 and 2015, which means nearly every fireplace is a zero-clearance prefab unit from one of three or four builders. That’s not what most chimney companies in North Texas are set up to handle. We are. Our technicians know exactly what to look for where the chase meets the roof line, where the refractory panels sit inside the firebox, and where Collin County’s clay soil has been quietly working against the flashing. When we write a scope for a Chimney Cap & Crown job in Murphy, it names the manufacturer, the part, the price, and what we’ll document when we’re done.
Corrine Halstead leads our scheduling and dispatch out of our Dallas-Fort Worth office, and every Murphy job gets a named technician, a text when the truck is rolling, and a background-checked crew in uniform. The work is covered by our 365-Day Done Right Promise: if it’s not right, we make it right. No fine print.
We’ve inspected and cleaned more than 38,000 chimneys since 2009. Every one had a written price before work started and a photo record when it was done. That’s Clause 4 of the Haven Standard, and we’ve followed it since before anyone asked us to.
Our Chimney Cap & Crown Services in Murphy
Cap Installation
If your Murphy home never had a proper cap, or the original cap is missing altogether, we’ll install one sized to your flue or chase. For prefab units, that usually means a stainless chase cover with a flue collar that matches the manufacturer’s spec. We stock caps from Olympia Chimney and Gelco, and we can pull the exact model number off your existing unit so the replacement actually fits. A new cap in Murphy typically runs $225-$495 depending on flue size and material.
Cap Replacement
This is the most common call we get in Murphy. The original galvanized chase covers installed on 2000s-era prefabs are now 15 to 25 years old, and most of them have rusted through in the same places: the corners, the flue collar, and anywhere the caulk has failed. If you can see rust streaks on your siding below the chase, the cap has already started to go. Replacement with a custom stainless cover typically runs $350-$750 in Murphy, installed, including the flue collar and new fasteners.
Crown Repair
True masonry chimneys are rare in Murphy, but they exist in a few older lots and custom builds near the eastern edge of town. On those systems, the concrete crown cracks the same way North Texas soil shifts: slow, seasonal, and just enough to let water sit in the gap. We repair crowns with a proper expansion joint and a tapered surface that sheds water. Minor crown repairs start around $275; full crown rebuilds on masonry chimneys range from $900-$1,600.
Crown Coating
For crowns that haven’t cracked through but show hairline wear and surface spalling, a coating makes sense. We apply an elastomeric crown coat that flexes with Murphy’s wet-dry clay cycles instead of cracking against them. Coating is also how we buy time on a crown that won’t need full replacement for another few seasons. Crown coating in Murphy typically runs $300-$550, and we photograph the crown before and after so you can see exactly what was applied.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Murphy
Most Murphy prefab fireplaces are Heat & Glo, Majestic, or Heatilator units, and their caps and chase covers are manufacturer-specific. We keep common cap profiles and chase cover layouts in stock for these brands so we’re not waiting two weeks on a factory order. When a stock part isn’t right, we fabricate a custom cap through our sheet-metal supplier network and have it cut, formed, and ready to install quickly. We use stainless steel for nearly every chase cover in Murphy because the climate here eats galvanized metal faster than the manufacturer ever planned for.
Common Chimney Cap & Crown Problems We See in Murphy Homes
- Rusted-through galvanized chase covers. Nearly every 2000s prefab chase in Murphy shipped with a painted galvanized cover meant to last “a while” in a dry climate. North Texas isn’t dry enough. We routinely pull covers with holes you can push a finger through.
- Cracked bottom refractory panels. Murphy’s use pattern is hard on these panels: the fireplace lights hard during a blue norther, runs hot for two days, then sits unused for months. That cycling cracks the panels, and once the bottom panel cracks, the metal firebox behind it is exposed.
- Flashing gaps at the chase-roof junction. Collin County’s expansive black clay expands and contracts through the year. That movement works the chase flashing loose, and the gap lets water run down the inside of the chase where nobody sees it until there’s a stain on the ceiling.
- Missing or undersized flue caps. Some Murphy builders skipped the flue cap entirely. Others installed one too small for the flue, which pulls rain and debris straight down. Either way, the fix is straightforward once we’re on the roof with a camera documenting what’s there.
Pricing for Chimney Cap & Crown in Murphy, TX
Here’s what you can expect to pay in Murphy, in actual dollars. A standard cap replacement on a single-flue prefab chase runs $350-$750 installed. Custom stainless chase covers for larger or multi-flue chases run $700-$1,200. Masonry crown repair starts at $275 for minor patching, and full crown rebuilds range $900-$1,600. Crown coating falls in the $300-$550 range. What changes the price? Flue size, cap style, whether we’re fabricating a custom cover, and whether your chase needs new flashing while we’re up there. We write every price down before work begins, along with the scope and the warranty. No “call for the real number” games. Call (980) 580-8641 for a written estimate, and bring us a competitor’s written quote if you want a free second opinion.
| Service | Typical Murphy Price Range |
|---|---|
| Cap replacement (single-flue prefab) | $350-$750 |
| Custom stainless chase cover (multi-flue) | $700-$1,200 |
| Crown repair (masonry) | $275-$700 |
| Full crown rebuild | $900-$1,600 |
| Crown coating | $300-$550 |
Why Murphy Prefabs Fail at the Same Time
Murphy grew fast. The subdivisions built between 1998 and 2015 along FM 544, McCreary Road, and the Collin County growth corridor used the same production builders, the same fireplace specs, and the same galvanized chase covers. Drive down any street in Maxwell Creek or Muirfield and the homes are near copies of each other. What that means for chimney work: when we find a specific failure on one house, we usually find the same failure three doors down.
In Maxwell Creek, our tech found a Majestic prefab with a rusted-through chase cover and a cracked bottom refractory panel. Both were original builder grade from 2004. We installed a custom stainless chase cover and a new refractory panel, then sealed the flashing gaps caused by Collin County clay movement. Because the builder used the same parts on the neighboring homes, we scheduled two more cap replacements on that same block within the week. Same failure, same fix, same written price. That’s the Murphy market in one job.
We Also Serve Cities Near Murphy
Most of our Murphy customers come from within Collin County, but we regularly run crews to the bigger metros nearby. If you’re searching for a Chimney Cap & Crown in Murphy or you’re in one of the surrounding cities, the same written-price guarantee and photo-record standard apply everywhere we work. We also serve Houston, San Antonio, Dallas, and Austin, with scheduling coordinated from our Dallas-Fort Worth office and crews dispatched locally.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Murphy
Rust doesn’t care how often you light a fire. The galvanized chase cover on your roof is outside in North Texas weather every single day, and after 15 to 20 years of rain, humidity, and sun, the coating fails and the steel rusts through. A rarely-used fireplace still has a chase full of air and insulation, and once water gets in, it damages the chase interior, the framing around it, and eventually the firebox itself. In Murphy, we’re seeing this on homes built between 2003 and 2010 right now. If your original cap is still up there, (980) 580-8641 gets you a written quote and a camera-based look at what’s actually happening on your roof.
Collin County sits on expansive black clay that swells when wet and shrinks when dry. Your foundation moves slightly with that cycle, and so does anything tied to the roofline. On a masonry chimney, that movement cracks the concrete crown along its thinnest sections. On a prefab chase, it pulls the flashing loose where the chase meets the shingles, opening a gap that lets water run down behind the chase. We seal and secure flashing as part of cap work in Murphy because leaving that gap open guarantees a leak the first time it rains. The fix is part of the written scope, not an upsell we tack on later.
Usually we can match it. Heat & Glo and Majestic both use standardized flue collars and chase dimensions across most of their prefab lines, and we keep the common profiles in stock. If your specific model needs a dimension we don’t stock, we fabricate a custom stainless cap through our sheet-metal network and have it ready quickly. Custom caps run $700-$1,200 in Murphy. Stock caps run $350-$750 installed. We tell you which one your unit needs before we quote anything, and the price is in writing before the ladder comes off the truck.
No. A cracked refractory panel in a prefab firebox is repairable. The panel is a replaceable component, not the firebox itself, and in most Murphy homes from the 2000s, the bottom panel is cracked while the rest of the unit is still structurally sound. We replace the panel, verify the firebox behind it hasn’t been damaged, and document the whole job with photos. Replacing the entire fireplace is only recommended when the firebox itself is compromised, and we’ll show you the camera evidence either way. No one should tell you to replace a whole unit over a $200 panel without proof.
Not the same thing. The cap is the metal cover on top that keeps rain and animals out. The crown is the masonry or poured surface around the flue on a traditional chimney. On Murphy’s prefab-heavy housing stock, the cap fails first, because the caps are galvanized steel exposed to weather and they rust through in 15 to 20 years. Crowns fail on the few masonry chimneys in town, mostly from clay soil movement. If you aren’t sure which you have, we’ll tell you from the roof and send photos before recommending anything. Call (980) 580-8641 and we’ll get it scheduled.
Get Your Murphy Chimney Cap & Crown Fixed Before the Next North Texas Storm
Rusted chase covers don’t fix themselves. They leak, and the water finds the path of least resistance: down the chase, into the framing, behind the fireplace, and eventually into your ceiling. Most of what we find in Murphy is still repairable for a few hundred dollars. The expensive repairs happen when the original cap has been rusted through for years and the damage has spread. If you live in Murphy and your home is from the 2000s or early 2010s, it’s worth having us take a look. Written price, photo record, and a 365-Day Done Right Promise on every job. Call (980) 580-8641 for a free estimate.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Murphy and the Collin County area under the Haven Standard.