Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Mesquite
A chimney cap and crown replacement in Mesquite typically runs $450 to $1,400 depending on whether you need a standard single-flue cap or a custom multi-flue unit, and crown repair or coating adds $350 to $900. Most jobs are completed in one visit, with the crown sealed and the cap fabricated to fit your existing flue dimensions. If you’re noticing water staining on the ceiling near the fireplace, rust on the damper, or a musty smell after rain, call (980) 580-8641 and we’ll schedule a camera-first inspection before recommending anything.
We work the older subdivisions east of US-80 and south of LBJ regularly, and we know what those 40-to-60-year-old masonry chimneys look like from the inside. The work we do in Mesquite is shaped by one thing more than any other: the Blackland Prairie clay under your foundation. It moves, and it moves your chimney with it.
Why Emberly Chimney Cleaners Is Mesquite’s Preferred Chimney Cap & Crown Company
Mesquite homeowners call us because we show them what we found before we ask for a dollar. Every visit includes a camera down the flue, and you walk away with a documented photo record. Clause 4 of the Haven Standard requires it on every job, and we’ve done it that way since 2009. Not because an insurer asked for it. Because it’s the only honest way to inspect a chimney in a city where the ground itself is working against the masonry.
Our technicians are background-checked and uniformed, and license information is visible on every page of our site. We don’t send you a crew with no name. You get a named tech assigned to your job and a text when they’re on the way to your Mesquite address. Calls are answered by a live person, 24/7. No voicemail, no web form.
We also honor a Free Second Opinion on any written estimate. If another company quoted you a cap and crown job in writing, bring it to us. We’ll inspect and tell you plainly what’s actually needed. Often the quote is too high. Sometimes it’s too low and skips the liner inspection entirely. Either way, you’ll know.
Our Chimney Cap & Crown Services in Mesquite
We service every type of masonry chimney in Mesquite, from the brick ranch homes built during the 1960s through the 1980s to newer construction. Our Chimney Cap & Crown work always starts with a camera inspection. In Mesquite specifically, that step is non-negotiable. Here’s what we handle most often:
Cap Installation
A new cap keeps rain, birds, squirrels, and leaves out of the flue. In Mesquite’s older homes, we often find the original cap is either missing entirely or rusted through. We install standard single-flue caps, top-mount caps with mesh siding, and custom-fabricated units sized to your exact flue dimensions.
Cap Replacement
If your existing cap is rusted, bent, or letting rain down the flue, replacement is usually a 90-minute job. We measure, fabricate if needed, and install with a mechanical fastening system rated for North Texas wind. No sheet-metal screws into the crown surface.
Crown Repair
The crown is the concrete slab at the top of the chimney. In Mesquite, crown spalling is common because shrink-swell clay flexes the entire stack. Hairline cracks let water in, and freeze-thaw cycles widen them over a single winter. We repair with proper expansion joints and a breathable sealant, not a quick smear of caulk.
Crown Coating
For crowns that are structurally sound but showing surface cracking, we apply a Gelco elastomeric sealant. It flexes with the minor movement that Mesquite clay soils cause, which matters here more than in cities with stable sandy loam. A rigid patch job on a moving chimney fails within two years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Mesquite
We install and service caps from Copperfield and Olympia Chimney, and we keep a range of standard sizes on the truck so most Mesquite jobs don’t require a second trip. For crowns and coatings, Gelco and HeatShield are our go-to materials because they tolerate the movement and moisture cycling we see on Blackland Prairie soil. We source through our buying network specifically to keep material costs down, and that savings shows up in your written price. DuraFlex and Famco components are available for multi-flue systems when the house calls for them.
Common Chimney Cap & Crown Problems We See in Mesquite Homes
These are the four findings we document most often on Mesquite inspections:
- Offset clay tile cracks behind an intact crown. The exterior looks fine. The camera shows flue tiles shifted out of alignment by soil movement. Sweeping a chimney in this condition can push debris into the wall cavity, so we inspect before we ever touch a brush. This is more common in Mesquite than in the stable-soil suburbs to the north and west.
- Spalling crown concrete from wet-dry cycling. The clay absorbs water during wet months, swells, then contracts in dry heat. That flexing cracks the crown. Water gets in, rusts the damper, and accelerates liner degradation during the short but intense winter burn season.
- Third-degree creosote glaze in wood-stove flues. Rural properties around Mesquite that heat primarily with wood burn long and slow. That builds a hard tar glaze inside the flue, and a brush won’t remove it. Cap and crown work on these homes always includes a liner assessment.
- Rusted damper assemblies from cap failure. A missing or broken cap lets rain directly onto the damper. We see this on homes in Creek Crossing and Valley Creek where the original caps were cheap sheet metal installed at build-out four decades ago.
Pricing for Chimney Cap & Crown in Mesquite, TX
Here’s what Mesquite homeowners should expect on a written quote from us:
| Service | Typical Price Range in Mesquite |
|---|---|
| Standard single-flue cap installation | $450 - $750 |
| Custom multi-flue cap (Copperfield or Olympia) | $900 - $1,400 |
| Crown repair with sealant | $350 - $700 |
| Crown coating (Gelco elastomeric) | $500 - $900 |
| Camera inspection + photo record | Included on every job |
What changes the price is flue count, crown size, and access. A two-flue chimney on a steep-pitch roof in the neighborhoods near Town East Mall costs more than a single-flue on a single-story ranch in Paschall. You get the exact number in writing before anyone starts, along with a written scope and written warranty. No surprises after the fact. Call (980) 580-8641 and we’ll schedule the inspection, then hand you the written price. That’s how it works, every time.
We Also Serve Cities Near Mesquite
Beyond Mesquite, our crews cover Chimney Cap & Crown in Mesquite and the surrounding metro. We routinely run jobs in Balch Springs, Rowlett, Irving, and Garland. If you’re in one of those cities, the same camera-first inspection standard, written pricing, and 365-Day Done Right Promise apply. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, but crews serve Mesquite locally.
Serving Mesquite, TX - Our Local Coverage Area
We’re based in the Mesquite area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Mesquite
A camera inspection is mandatory because Mesquite’s shrink-swell clay soil cracks flue liners from the inside out, and an exterior look at the cap or crown won’t reveal it. We’ve documented offset clay tile cracks in chimneys that looked structurally fine from the ground. Replacing a cap or coating a crown on a chimney with a compromised liner means you’ve sealed the top while the real problem continues below. The camera shows us what’s actually there, and you keep the photos. Call (980) 580-8641 to schedule an inspection with the photo record included.
Every rural wood-stove chimney around Mesquite should be swept at minimum once per burn season, and twice per season if you burn more than two cords of wood or burn green wood. Heavy, long-burn usage produces third-degree creosote glaze that hardens into a tar layer a brush can’t remove, and that glaze is a chimney fire waiting on a hot reload. Between sweeps, burn seasoned hardwood only, keep the fire hot rather than damped down, and never burn construction scrap. If you’re unsure what you’re seeing in the firebox, call (980) 580-8641 and we’ll put a camera on it.
No. A cap keeps rain, critters, and debris out. It cannot stop foundation-driven movement from Mesquite’s Blackland Prairie clay. What a cap does do is prevent water intrusion from the top, and water is the accelerant that turns hairline liner cracks into spalled flue sections. The flexing itself is addressed through crown coating with flexible sealant and through managing drainage around the foundation. We’ll be straight with you about what a cap can and cannot do before you spend a dollar.
A custom-fabricated multi-flue cap sized to the exact outside dimensions of your flue array works best. Mesquite’s 1960s brick ranches often have two or three flue tiles set in a single masonry chimney, and a flimsy universal cap leaves gaps. We measure, then build a Copperfield or Olympia cap with proper overhang and mesh sizing for your flue count. It costs more than a box-store cap, and it’s also the only one that actually keeps rain out of a multi-flue system.
Because the problem is usually not the crown. It’s the liner. In Mesquite specifically, we frequently find offset clay tile cracks from soil movement that don’t show on the exterior at all. The smoke and creosote smell are the liner leaking into the wall cavity or the smoke chamber pulling draft poorly. A camera inspection identifies the exact failure point. Sometimes it’s a crown issue. Usually it’s deeper. Call (980) 580-8641 and we’ll show you the footage, then give you a written price for whatever’s actually needed.
Contact Emberly Chimney Cleaners in Mesquite
If you own a home in Mesquite with a masonry chimney built between 1960 and 1985, you’re dealing with clay soil movement, an aging flue liner, and a crown that’s been weather-cycled for four or five decades. We’re the company that puts a camera down the flue before recommending a single thing, hands you a written price before any work starts, and backs the job with the 365-Day Done Right Promise. Over 38,000 chimneys inspected and cleaned since 2009, every one with a documented record when it was done. Call (980) 580-8641 today. A live person answers. You’ll get a straight answer and a written price.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Mesquite and the Dallas-Fort Worth metro.
Chimney Cap & Crown in Nearby Areas
