Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Lincoln Park
A chimney cap and crown replacement in Lincoln Park, MI typically costs $425-$1,150 depending on whether you have a standard single-flue cap, a custom multi-flue cap, or a full crown rebuild with a new drip edge. Most jobs on the city’s 1940s-1960s bungalows and Cape Cods take one visit of about two to three hours. We run a camera down every flue before we put a cap on it, because on shared-stack Lincoln Park homes, the problem is usually bigger than the part. Call (980) 580-8641 and we’ll give you a written price before any work starts, not after the tech is already on your roof.
If you live on one of the tight grid streets off Fort Street or Southfield Road, you already know how close the houses sit in Lincoln Park. When two attached bungalows share a brick chimney stack, a cracked crown on one side is not just your problem. It is your neighbor’s problem too, and it will become yours again when the freeze-thaw cycle splits it wider next winter.
Why Emberly Chimney Cleaners Is Lincoln Park’s Preferred Chimney Cap & Crown Company
We are the company that made camera-scan documentation the default back in 2009, years before insurers or code officials started asking for it. Clause 4 of the Haven Standard requires a photo record on every job, and that is exactly what you get when we inspect, repair, or replace a cap or crown on a Lincoln Park chimney. You see the cracked mortar, the rusted anchor points, the raccoon nesting debris, the flue spalling. You do not have to take anyone’s word for it.
Corrine Halstead runs our operations, and she built the standard we work under around one plain idea: documented evidence before anyone asks you for a dollar. Our Lincoln Park customers receive a written scope, a written price, and a written warranty before the first tool comes off the truck. That is Haven Standard Clause 1, and we have never worked any other way. We also answer our phones with a live person 24 hours a day, including the nights a southeast Michigan windstorm rips a cap off and you can hear rain hitting your damper at 2 a.m.
Our technicians are uniformed and background-checked, and they know the difference between the chunky 1940s brickwork near Memorial Park and the slightly younger 1960s ranch homes west of Dix Highway. More important, they know how to spot a coal-era flue that was never lined for natural gas, because that changes the cap sizing and the crown repair approach. We do not copy-paste a solution from another neighborhood and call it good.
Our Chimney Cap & Crown Services in Lincoln Park
Cap Installation
A properly sized cap on a Lincoln Park chimney does two jobs: it keeps rain, snow, and animals out of the flue, and it prevents wind-driven downdrafts from pushing furnace exhaust back into the basement. On attached bungalows where two flues share one stack, we will almost always recommend a multi-flue cap that covers the entire crown rather than two individual caps that leave the shared middle section exposed. We keep Olympia Chimney and Gelco caps in common Downriver sizes, so most installations are not delayed by shipping.
Cap Replacement
The caps we pull off Lincoln Park chimneys are usually rusted at the anchor legs or blown off entirely. On shared stacks, one missing cap on the neighbor’s flue can drop rain straight into your own furnace vent through the common crown chase. We replace the cap and reseal both flue terminations as part of the same visit, because stopping one leak while leaving the other one open is not a done job.
Crown Repair
Original concrete crowns on 1940s Lincoln Park bungalows were poured without a drip edge. Water runs down the face of the brick, freezes overnight, and pops small chunks of brick onto the narrow walkway between houses. We cut out the failed sections, form a new crown with a minimum 2-inch overhang, and add a bracket-fitted drip edge so water sheds away from the brick. On shared-stack chimneys, we seal the entire crown across both homeowners’ flues, because you cannot repair half a crown.
Crown Coating
When the crown is still structurally sound but showing early surface cracking, a high-solid elastomeric crown coating from Gelco buys you years before a full rebuild becomes necessary. This is a common recommendation on newer Lincoln Park chimneys that have not yet gone through enough freeze-thaw cycles to fail outright. We photograph every crack before coating, then photograph the finished surface after, so you have a dated record of the condition.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Lincoln Park
We install and repair components from Olympia Chimney, Gelco, Famco, and Copperfield, and we have built thousands of custom caps in the Downriver market. Our custom cap work is fabricated to the exact flue layout of your Lincoln Park stack, which matters when two homes share a chimney and the flue spacing is not standard. We have done enough shared stacks off Garfield Avenue and Moran Boulevard to know what those dimensions look like before we even measure.
Common Chimney Cap & Crown Problems We See in Lincoln Park Homes
- Shared-stack crown failure on attached bungalows. Two flues share one crown, so water entering through a crack on the neighbor’s side runs down both liners. We regularly see a rusted damper on one side and a water-pooled B-vent on the other, both from the same unsealed crown.
- Caps rotted at the anchor legs. Lincoln Park’s winter moisture from the Detroit River corridor keeps mortar damp for weeks. When old galvanized cap legs rust through, the cap hangs by one screw or ends up in the backyard after a windstorm.
- Animal entry through missing caps on shared stacks. A squirrel drops into one flue, builds a nest, and the neighbor’s furnace vent gets partially blocked. The homeowner whose side is clear has no idea anything is wrong until the carbon monoxide detector goes off in the house next door.
- Crowns cracked through at the flue joints on coal-era chimneys. Those oversized clay tiles from the 1950s expand and contract at different rates than the concrete pour around them. Over seven decades, the joint seal fails and water finds its way into the attic chase on both sides of the party wall.
Pricing for Chimney Cap & Crown in Lincoln Park, MI
| Service | Typical Lincoln Park Price Range |
|---|---|
| Single-flue cap installation (standard stainless) | $425 - $650 |
| Multi-flue cap installation (shared/adjacent flues) | $875 - $1,150 |
| Custom cap fabrication & installation | $1,100 - $2,200 |
| Crown repair (partial fill and seal) | $390 - $650 |
| Crown rebuild with drip edge (full removal and re-form) | $1,100 - $1,900 |
| Crown coating (elastomeric sealant over stable crown) | $475 - $750 |
On a shared-stack Lincoln Park chimney, you should expect that any crown or cap repair will address both flues, even if only one is currently showing damage. That is not upselling. Leaving one side of a common crown cracked while repointing the other is a temporary patch that fails at the next hard freeze. We quote the full stack as a single job and tell you plainly which work can safely wait. Call (980) 580-8641 for a free estimate, and bring a competitor’s written quote if you have one. We will give you a second opinion on it at no charge.
We Also Serve Cities Near Lincoln Park
Our crews cover Lincoln Park and the surrounding Downriver and western Wayne County cities, including Taylor, Dearborn Heights, Dearborn, and Detroit. If you are in one of those communities and the chimney is shared with a Lincoln Park property, call us before you assume which side of the stack is leaking. (980) 580-8641.
Serving Lincoln Park, MI - Our Local Coverage Area
We’re based in the Lincoln Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Lincoln Park
Legally, responsibility usually follows the property line and the flue ownership, but in practice we see shared-stack Lincoln Park homeowners work it out directly most of the time. If the crown is cracked on your side and water runs into the neighbor’s flue, you may be liable for damage to their chimney interior even if the original crack was not your doing. We recommend a written agreement and a single repair that covers both flues, because half a crown patch on a shared stack will fail again. Call (980) 580-8641 and we can document the condition for both sides before anyone spends a dollar.
We do not recommend it, and we are not saying that to sell you a service call. Lincoln Park’s attached bungalows often have shared stacks with two flues close together, and a cap sized for a modern gas furnace will not fit the oversized clay tile from a 1950s coal conversion. Install the wrong cap and you can actually make the downdraft worse. Working on a roof with a 10-to-12 pitch in southeast Michigan winter is hazardous, and a fall from even a single-story Cape Cod eave is a serious injury. We show you the correct cap size and photos before we touch anything. Call (980) 580-8641 for a free quote.
Because most Lincoln Park crowns were poured in the 1940s and 1950s with no drip edge, and patching the surface does not change that. Water still runs down the brick face, freezes in the mortar joints, and expands. A proper fix means removing the failed concrete and forming a new crown with a 2-inch overhang and a mechanical drip edge, and then sealing the entire shared stack, not just your side. If a previous contractor just troweled on a surface patch, you got a temporary fix. We give you a written scope and a warranty on every crown rebuild, and we have been doing them on Downriver attached homes for years. Call (980) 580-8641.
Yes, and we have documented it on Lincoln Park shared stacks. If one flue is cracked, or the shared crown has failed, or the shared cap is missing, furnace exhaust can migrate into the adjacent flue and backdraft into your basement. You will not smell it and you may not notice it until a CO detector goes off or someone gets headaches. We run a camera down both flues and check the cap and crown as one system, not as two separate jobs. Call (980) 580-8641 and we will show you exactly what is happening inside the shared stack.
A multi-flue cap covers the entire shared crown in one piece, so there is no open gap between two separate caps where a squirrel or raccoon can drop into the chase. This is the standard fix on Lincoln Park’s attached bungalows where two 1950s-era flues sit inches apart. We fabricate custom Copperfield multi-flue caps to the exact dimensions of your shared stack, and we can do the same for the neighbor’s side at the same time. Call (980) 580-8641 for a site inspection and written quote.
Contact Emberly Chimney Cleaners in Lincoln Park
If you live in Lincoln Park and your chimney cap is rattling, rusted through, or gone entirely, call (980) 580-8641. We will book a Level 2 camera inspection of both flues, document the crown condition with photos, and hand you a written price before any work begins. You will know exactly what is wrong, what it costs, and whether it can wait. That is how we have done every job since 2009, and that is how we will do yours.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Lincoln Park under the Haven Standard.