Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Kenmore
Chimney cap and crown repair in Kenmore typically runs $425-$1,650 depending on whether you need a standard stainless replacement or a custom wind-directional solution for lakeside exposure. We complete most cap and crown work in a single visit, and every job starts with a written price before anyone picks up a tool. Our crews serve all of Kenmore, from the hillside homes above Lake Washington to the ranch neighborhoods near Log Boom Park, and we’re on-site quickly when the rain finds a way in. Call (980) 580-8641 for a free estimate with a camera-scan inspection included.
Why Emberly Chimney Cleaners Is Kenmore’s Preferred Chimney Cap & Crown Company
We’ve inspected and cleaned more than 38,000 chimneys since 2009, every one of them with a camera down the flue and a written price before work started. That’s the Haven Standard, and it’s the reason Kenmore homeowners call us when a cap has failed or a crown is letting water into the masonry. Our technicians are background-checked, uniformed, and assigned by name. You’ll get a text when they’re on the way, and the person on the phone when you call is a live human, 24 hours a day.
What matters in Kenmore is moisture. The lakeside humidity and southwest wind patterns mean caps and crowns here fail differently than they do a few miles inland. We know those failure modes, we’ve documented them with camera footage on hundreds of local chimneys, and we’ll show you exactly what we found before recommending anything. Clause 4 of the Haven Standard requires a documented photo record on every visit, so you walk away with evidence, not just an opinion. If you have a written estimate from another company, bring it to us for a free second opinion. Corrine Halstead leads our team, and she’s particular about one thing above all: the written scope matches the work we actually do.
Our Chimney Cap & Crown Services in Kenmore
Cap Installation
A chimney cap does two jobs in Kenmore: it keeps rain out, and it manages wind. Homes on the hillsides above Lake Washington catch prevailing southwest winds that can press down the flue and push smoke back into the living room. A standard cap won’t fix that. We spec and install caps that address the wind direction your chimney actually faces, not just the flue diameter. Materials come from Famco and Copperfield, sourced through our buying network to keep the price honest.
Cap Replacement
The most common cap we replace in Kenmore is a galvanized unit that looked fine five years ago and is now corroded through at the seams. Lakeside humidity and salt-laced moisture eat galvanized steel faster than you’d expect. We replace galvanized caps with stainless options that outlast them by a factor of three or more. If your cap is rusted, flaking, or the mesh is separating from the frame, call us: (980) 580-8641. We’ll give you a written replacement quote with the exact cap model and material specified.
Crown Repair
Kenmore’s freeze-thaw cycle is relentless from October through April. Water seeps into hairline cracks in the crown, freezes, expands, and widens those cracks. By spring, the crown is compromised and rainwater is running straight down into the flue liner. We repair crowns with materials that seal and hold, including Gelco sealants, and we’ll document the repair with before-and-after photos. If the crown has degraded too far for a coating, we’ll tell you plainly and quote a rebuild instead. No scare-selling. No mystery recommendations.
Crown Coating
Crown coating is a preventive treatment, not a structural repair. If your crown is sound but showing surface wear, a coating is the right call and usually runs $275-$475 in Kenmore. We apply it, photograph it, and log the date in your chimney’s record so we can track wear over time. Think of it as the cheapest insurance against a $1,500 crown rebuild. Our full Chimney Cap & Crown team handles coating, repair, replacement, and custom fabrication.
Custom Cap
Some Kenmore chimneys don’t fit a standard cap. Wide flues, offset flue centers, or multiple flues on a postwar masonry chimney often require a custom-fabricated solution. We measure on-site, spec the cap to match the flue and the wind exposure, and have it fabricated to order. Typical custom caps in Kenmore run $825-$1,650 including installation, depending on material gauge and flue configuration. You’ll get a fixed written price before the order goes in, and the cap is warranted.
Multi-Flue Cap
Homes built in the 1950s and 60s often have two flues: one for the fireplace, one for a furnace or water heater. Multi-flue caps cover both under a single custom-fabricated lid, which means one installation instead of two. The catch is that older masonry chimneys sometimes have uneven crown surfaces that need leveling first. We check that before quoting, so the price you get is the price you pay. No adjustments after the fact.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Kenmore
We stock and install parts from Famco, Copperfield, and HeatShield because they’ve proven durable in Kenmore’s wet, wind-driven environment. Copperfield’s stainless caps hold up especially well against the salt-laced moisture near Lake Washington, and we keep common sizes on hand for faster turnaround on Kenmore jobs. If a part isn’t in our truck, we can usually have it within a few days. You’ll never wait weeks for a cap while rain keeps falling down your flue. Our Chimney Cap & Crown in Kenmore coverage means parts, crew, and scheduling are coordinated locally, not drop-shipped from across the country.
Common Chimney Cap & Crown Problems We See in Kenmore Homes
- Galvanized cap corrosion at the seams. Persistent lakeside humidity and salt air eat galvanized steel in 5-7 years. The cap looks fine from the ground, but up close the seams are rusting through and the flue is open to rain. We find this on at least a third of the Kenmore chimneys we inspect.
- Freeze-thaw crown cracking. Kenmore’s October-April rain cycle loads water into hairline cracks, then overnight freezes expand them. By year five, a crown can be structurally compromised and leaking into the flue liner. Early repair costs a few hundred dollars; a full rebuild runs over a thousand.
- Wind-driven backdrafting from the southwest. Hillside chimneys above Lake Washington face prevailing southwest winds that create negative pressure at the flue opening. The fireplace smokes back into the room, and the homeowner assumes it’s dirty. We’ve solved dozens of these with a wind-directional cap, not a cleaning.
- Flashing erosion near the roofline. Wind-driven spray from the lake erodes flashing seals on hillside chimneys. The first sign is often white efflorescence or spalling bricks near the roofline, not a visible leak inside. By the time water stains show on the ceiling, the flashing has been failing for months.
Pricing for Chimney Cap & Crown in Kenmore, WA
Here’s what chimney cap and crown work actually costs in Kenmore right now. A standard stainless cap replacement runs $425-$675 installed, depending on flue size and roof access. Crown repair with crack sealing and coating runs $350-$600. A full crown rebuild runs $900-$1,500. Custom caps run $825-$1,650. Multi-flue caps run $700-$1,200. What moves the price is roof pitch, chimney height, and whether we need a lift or can ladder-access safely. You’ll get a written price covering everything before we start. No call-for-quote games. No after-the-fact add-ons. We answer the phone 24/7 at (980) 580-8641, and estimates are free.
We Also Serve Cities Near Kenmore
We serve Kenmore and the surrounding communities, including Kenmore proper, Bothell, Mountlake Terrace, Lynnwood, and Kirkland. Whether you’re up on the hill near Arrowhead or down by the lake off 68th Ave NE, we’ll get a named tech to your door with a written price and the right parts for our climate. Call (980) 580-8641.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Kenmore
Because the cap is likely missing, damaged, or the wrong design for your chimney’s wind exposure. Kenmore’s hillside homes above Lake Washington face prevailing southwest winds that press down the flue and create negative draft. A standard cap doesn’t redirect that pressure. A wind-directional stainless cap does. We’ll diagnose it with a camera and a smoke test, then give you a written fix. Call (980) 580-8641 for an exact quote, free.
Every two years at minimum. Stainless holds up well against Kenmore’s humidity, but the mounting hardware, mesh, and crown beneath it are the weak points. We recommend a camera-scan inspection every 24 months on lakeside chimneys, and we’ll document what we find with photos you can see. It’s faster and cheaper than letting a small issue become a liner replacement.
The mounting hardware, almost always. The mesh can last 10-15 years on a stainless cap, but the screws and brackets that anchor the cap to the crown corrode from lakeside humidity and salt air. Once the anchor points loosen, wind can shift the cap, rain gets in, and the cap itself becomes a hazard in a storm. We replace hardware with stainless and check anchor integrity on every cap visit.
Usually, yes. Most 1950s-70s Kenmore chimneys have crowns that are worn but structurally sound enough to accept a custom cap. We’ll assess the crown, level it if needed, and mount the new cap with a weather-sealed anchor system. If the crown is too degraded, we’ll tell you before quoting anything and give you a written price for the full job. No buried costs.
Both, depending on the flue configuration. Many Kenmore ranch and split-level homes have two flues side by side, which a standard multi-flue cap covers well. But if your flues are offset, unusually wide, or the crown has settled unevenly, a custom cap is the safer long-term choice. We measure on-site, show you the options, and give you one written price either way. Call (980) 580-8641 and we’ll schedule the inspection.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Kenmore under the Haven Standard since 2009.