Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Homestead
Chimney cap and crown work in Homestead runs about $340 to $1,700 depending mostly on cap type, crown condition, and whether we’re working around a wildlife calendar. A flush-mount concrete crown overlay starts near $340; a custom stainless multi-flue cap with full crown rebuild can hit $1,700. We’re a local crew that knows Homestead, not a call center routing a stranger from Doral. Call (980) 580-8641 and you’ll talk to a person who understands what 60-plus inches of rain a year does to masonry.
The truth about chimneys in Homestead is that most of them never see a fire. They sit idle for years, which sounds like they should be fine, but idle chimneys here collect moisture, debris, and wildlife faster than anywhere else in South Florida. A cracked crown or missing cap in Homestead is not a cosmetic issue. It’s an open door for water, raccoons from the Everglades corridor, and federally protected chimney swifts. We’ll get into all of that below.
Why Emberly Chimney Cleaners Is Homestead’s Preferred Chimney Cap & Crown Company
We built our name on a specific promise: a written price, a written scope, and a written warranty before anyone touches the chimney. That’s Haven Standard Clause 1, and it’s been our practice on every one of the 38,000-plus inspections and cleanings we’ve completed since 2009. Homestead homeowners doing post-Andrew concrete block rebuilds tell us the same thing again and again: they want to see the evidence before they spend real money. So we show it. Camera down the flue, photos of the crown, a written price on the table before work starts.
Our team works around Homestead’s specific rhythm. We’ve swapped caps in the Redland after severe thunderstorms. We’ve re-profiled crowns on homes off Krome Avenue where wind-driven rain sits in the masonry for weeks. We understand that a post-Andrew CBS home with a metal flue liner still needs a proper cap, because the liner is not the water barrier. The cap and crown are. Corrine Halstead leads our crew, and she insists on one thing above all: no recommendation without camera evidence you can look at yourself.
We answer calls around the clock, every day. Not a voicemail, not a web form. When you call (980) 580-8641, a person picks up. And when we schedule a visit, you get a text when your technician is on the way, with a name and a license number. No anonymous trucks pulling up.
Our Chimney Cap & Crown Services in Homestead
Cap Installation
Most homes in Homestead that have chimneys were built after 1992, when Hurricane Andrew flattened an estimated 90% of the city’s residential structures. The rebuilds went up fast, and many got chimneys with no cap at all or a builder-grade unit that rusted out within a decade. We install stainless steel caps from Gelco and Olympia Chimney sized to your flue, with mesh that keeps out raccoons and Everglades corridor birds while still letting the flue breathe. A standard single-flue cap installation in Homestead runs $180 to $340.
Cap Replacement
Wind is the enemy here. Homestead sits exposed to storm lines that sweep off Florida Bay, and we regularly find caps torn loose or bent after a single severe thunderstorm. A replacement involves matching the cap to your flue dimensions, securing it with stainless hardware, and checking the crown underneath for cracks the old cap was hiding. Cap replacement in Homestead typically runs $200 to $390 for a standard unit, more for multi-flue or custom work.
Crown Repair
This is the service Homestead needs more than almost anywhere else, and the weather is why. The crown is that concrete slab at the top of the chimney that sheds water off the masonry. In Homestead’s humid subtropical climate, wind-driven rain soaks into the crown, and then the relentless moisture does the rest: spalling, cracking, efflorescence. A cracked crown lets water into the chimney structure itself, and you won’t see the damage until you have a ceiling stain or a deteriorated flue. We repair crowns by re-profiling with a reinforced concrete overlay and sealing it. Crown repair in Homestead runs $340 to $850, depending on how much of the original crown is salvageable.
Crown Coating
If the crown is intact but showing early signs of water absorption, we apply a flexible crown coating that fills micro-cracks and sheds water before it penetrates. This is the smart pre-hurricane-season move for Homestead homeowners. It’s cheaper than a rebuild and it buys years. Coating runs $250 to $450, and we’ll show you before-and-after photos so you can see what you paid for.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Homestead
We stock and install caps, crowns, and accessories from Gelco, Olympia Chimney, Famco, and Copperfield. These aren’t discount parts. They’re code-rated stainless and galvanized units built for exactly the conditions Homestead dishes out: tropical storm-force winds, heavy rain, and salt-adjacent air. Because we source through the Haven buying network, we keep the price honest without cutting corners on materials. When you call us out to a home near Homestead Air Reserve Park or down off SW 312th Street, we arrive with the right parts on the truck, not a promise to order them later.
Common Chimney Cap & Crown Problems We See in Homestead Homes
- Chimney swift nesting between April and October. These federally protected birds descend on uncapped flues along the Everglades corridor every spring. Once an active nest is present, we legally cannot clean, cap, or disturb the chimney until the birds leave. That’s a wildlife calendar Miami and Fort Lauderdale crews rarely deal with.
- Cracked crowns from wind-driven rain and humidity. Over 60 inches of annual rain, sitting water, repeated thermal shock even without a fire. The crown absorbs it all, then cracks. And once it cracks, the masonry below starts spalling, and the fix gets more expensive.
- Displaced or missing caps after tropical weather. We see this after every severe storm line: caps torn off, bent, or shoved halfway off the flue. A missing cap is an open flue, which means water, debris, and animals from the Everglades edge.
- Flashing failures at the roofline. The seam between the chimney and the roof takes a beating in any climate, but Homestead’s rain makes it worse. When flashing fails, water runs down the inside of the chimney chase and shows up as a brown ceiling stain that has nothing to do with the firebox.
Pricing for Chimney Cap & Crown in Homestead, FL
You’ll get a written price before work starts on your Homestead home. Full stop. Not an estimate over the phone that doubles when our tech walks in. The price they hand you is the price you pay.
A typical single-flue cap installation in Homestead runs $180 to $340. Crown repairs are $340 to $850, depending on how much of the crown is deteriorated. Crown coating sits between $250 and $450. A custom stainless multi-flue cap with a full crown rebuild on a larger chimney can reach $1,500 to $1,700, which is the high end of the range in Homestead. What changes the number is what our camera finds in the flue, not which crew member answers the phone.
We also offer a Free Second Opinion on any written estimate. Bring us a competitor’s written quote and we’ll give you ours, in writing. A fair price is a documented price. Call (980) 580-8641 for a free estimate.
We Also Serve Cities Near Homestead
Our crews cover the full South Florida area: Coral Gables, Miami, Miami Beach, and Hialeah. If you’re in one of those cities, we can schedule cap or crown work with the same written-price standard. Homestead is home base for this page, but we’re not far. See our Chimney Cap & Crown in Homestead page for more on the neighborhoods we cover.
Serving Homestead, FL - Our Local Coverage Area
We’re based in the Homestead area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Homestead
Because that’s chimney swift nesting season, and the birds are federally protected under the Migratory Bird Treaty Act. Once an active nest is present in a flue, it is illegal to clean, cap, or even enter the chimney until the birds vacate, which usually happens in late summer or early fall. Homestead sits directly on the Everglades corridor, so we deal with this every year. Before any cap or crown work between April and October, we inspect the flue for swifts. If they’re there, we reschedule. No exceptions, because the fines are real and the law is clear. Call (980) 580-8641 and we’ll tell you exactly where we stand in the season.
Yes. The crown’s job has nothing to do with whether you burn fires. It sheds water off the masonry, and a cracked crown lets water into the structure. In Homestead, where we get 60-plus inches of rain a year and tropical storm winds drive it sideways, a cracked crown before hurricane season is a water intrusion problem waiting to happen. The repair gets more expensive after a season of soaking. We can repair it for $340 to $850, show you the camera footage, and you’ll know it’s done before the storms arrive. Call (980) 580-8641 to schedule.
Look up and see if the cap is still there, first. Then check if it’s sitting squarely on the flue or if it’s been pushed, bent, or tilted. If you can get on a ladder safely, look for missing screws or gaps where the cap meets the flue. From inside, look at the ceiling near the chimney chase for any new brown or yellow staining. That stain means water is getting past the flashing or the crown. If you see any of these issues, call us. We’ll do a full inspection, camera included, and give you a written price if anything needs replacing. The inspection fee in Homestead is rolled into the service when work proceeds.
Yes. The metal flue liner carries exhaust. It is not a water barrier. The cap keeps rain, debris, and animals out of the flue, and the crown keeps water out of the masonry and the chimney chase. We see this assumption a lot in Homestead, especially on homes off SW 312th Street and around the Redland. A liner without a cap is just an open pipe pointed at the sky. We stock stainless caps from Gelco and Olympia Chimney that fit standard liner diameters. Installation is $180 to $340.
It changes everything about the mesh and the hardware. Raccoons from the Everglades corridor can tear off weak caps and push through loose mesh. Chimney swifts will exploit any gap larger than about half an inch. So we install caps with proper stainless mesh, security clamps, and reinforced fasteners. On a post-Andrew rebuild off SW 312th Street in May, our tech found a Gelco cap torn loose after severe thunderstorms and a cracked crown underneath. Before we touched anything, we confirmed no active swift nest in the flue. We replaced the cap with a code-rated stainless unit, re-profiled the crown with reinforced concrete, and sealed the flashing to stop water that was already staining the ceiling below. That sequence is normal for Homestead.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Homestead under the Haven Standard since 2009.